Guide to the Secure Configuration of Red Hat Enterprise Linux 6

SCAP Security Guide · ntpserver

$ sudo yum erase vsftpd
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove vsftpd

- name: Ensure vsftpd is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - vsftpd
  tags:
    - package_vsftpd_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-26687-4
    - NIST-800-53-CM-7

include remove_vsftpd

class remove_vsftpd {
  package { 'vsftpd':
    ensure => 'purged',
  }
}

package --remove=vsftpd

$ sudo yum erase httpd
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove httpd

- name: Ensure httpd is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - httpd
  tags:
    - package_httpd_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27133-8
    - NIST-800-53-CM-7

include remove_httpd

class remove_httpd {
  package { 'httpd':
    ensure => 'purged',
  }
}

package --remove=httpd

$ sudo yum erase bind
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove bind

- name: Ensure bind is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - bind
  tags:
    - package_bind_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27030-6
    - NIST-800-53-CM-7

include remove_bind

class remove_bind {
  package { 'bind':
    ensure => 'purged',
  }
}

package --remove=bind

$ sudo chkconfig --level 2345 ntpd on
# Function to enable/disable and start/stop services on RHEL and Fedora systems.
#
# Example Call(s):
#
#     service_command enable bluetooth
#     service_command disable bluetooth.service
#
#     Using xinetd:
#     service_command disable rsh.socket xinetd=rsh
#
function service_command {

# Load function arguments into local variables
local service_state=$1
local service=$2
local xinetd=$(echo $3 | cut -d'=' -f2)

# Check sanity of the input
if [ $# -lt "2" ]
then
  echo "Usage: service_command 'enable/disable' 'service_name.service'"
  echo
  echo "To enable or disable xinetd services add \'xinetd=service_name\'"
  echo "as the last argument"  
  echo "Aborting."
  exit 1
fi

# If systemctl is installed, use systemctl command; otherwise, use the service/chkconfig commands
if [ -f "/usr/bin/systemctl" ] ; then
  service_util="/usr/bin/systemctl"
else
  service_util="/sbin/service"
  chkconfig_util="/sbin/chkconfig"
fi

# If disable is not specified in arg1, set variables to enable services.
# Otherwise, variables are to be set to disable services.
if [ "$service_state" != 'disable' ] ; then
  service_state="enable"
  service_operation="start"
  chkconfig_state="on"
else
  service_state="disable"
  service_operation="stop"
  chkconfig_state="off"
fi

# If chkconfig_util is not empty, use chkconfig/service commands.
if [ "x$chkconfig_util" != x ] ; then
  $service_util $service $service_operation
  $chkconfig_util --level 0123456 $service $chkconfig_state
else
  $service_util $service_operation $service
  $service_util $service_state $service
  # The service may not be running because it has been started and failed,
  # so let's reset the state so OVAL checks pass.
  # Service should be 'inactive', not 'failed' after reboot though.
  $service_util reset-failed $service
fi

# Test if local variable xinetd is empty using non-bashism.
# If empty, then xinetd is not being used.
if [ "x$xinetd" != x ] ; then
  grep -qi disable /etc/xinetd.d/$xinetd && \

  if [ "$service_operation" = 'disable' ] ; then
    sed -i "s/disable.*/disable         = no/gI" /etc/xinetd.d/$xinetd
  else
    sed -i "s/disable.*/disable         = yes/gI" /etc/xinetd.d/$xinetd
  fi
fi

}

service_command enable ntpd

- name: Enable service ntpd
  service:
    name="{{item}}"
    enabled="yes"
    state="started"
  with_items:
    - ntpd
  tags:
    - service_ntpd_enabled
    - medium_severity
    - enable_strategy
    - low_complexity
    - low_disruption
    - CCE-27093-4
    - NIST-800-53-AU-8(1)
    - PCI-DSS-Req-10.4
    - DISA-STIG-RHEL-06-000247

server ntpserver
server ntpserver
$ sudo yum erase openldap-servers
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove openldap-servers

- name: Ensure openldap-servers is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - openldap-servers
  tags:
    - package_openldap-servers_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-26858-1
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000256

include remove_openldap-servers

class remove_openldap-servers {
  package { 'openldap-servers':
    ensure => 'purged',
  }
}

package --remove=openldap-servers

$ sudo yum erase net-snmp
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove net-snmp

- name: Ensure net-snmp is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - net-snmp
  tags:
    - package_net-snmp_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-26332-7

include remove_net-snmp

class remove_net-snmp {
  package { 'net-snmp':
    ensure => 'purged',
  }
}

package --remove=net-snmp

# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove rsh

- name: Ensure rsh is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - rsh
  tags:
    - package_rsh_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27359-9

include remove_rsh

class remove_rsh {
  package { 'rsh':
    ensure => 'purged',
  }
}

package --remove=rsh

$ sudo yum erase rsh-server
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove rsh-server

- name: Ensure rsh-server is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - rsh-server
  tags:
    - package_rsh-server_removed
    - high_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27062-9
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000213

include remove_rsh-server

class remove_rsh-server {
  package { 'rsh-server':
    ensure => 'purged',
  }
}

package --remove=rsh-server

$ sudo rm /etc/hosts.equiv
$ rm ~/.rhosts
find /home -maxdepth 2 -type f -name .rhosts -exec rm -f '{}' \;

if [ -f /etc/hosts.equiv ]; then
	/bin/rm -f /etc/hosts.equiv
fi

- block:
    - name: "Detect shosts.equiv Files on the System"
      find:
          paths: /
          recurse: yes
          patterns: shosts.equiv
      check_mode: no
      register: shosts_equiv_locations

    - name: "Remove Rsh Trust Files"
      file:
          path: "{{ item.path }}"
          state: absent
      with_items: "{{ shosts_equiv_locations.files }}"
      when: shosts_equiv_locations
  tags:
    - no_rsh_trust_files
    - high_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-27270-8
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000019

# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove telnet

- name: Ensure telnet is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - telnet
  tags:
    - package_telnet_removed
    - low_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27428-2

include remove_telnet

class remove_telnet {
  package { 'telnet':
    ensure => 'purged',
  }
}

package --remove=telnet

$ sudo yum erase telnet-server
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove telnet-server

- name: Ensure telnet-server is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - telnet-server
  tags:
    - package_telnet-server_removed
    - high_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27073-6
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000206

include remove_telnet-server

class remove_telnet-server {
  package { 'telnet-server':
    ensure => 'purged',
  }
}

package --remove=telnet-server

# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove ypbind

- name: Ensure ypbind is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - ypbind
  tags:
    - package_ypbind_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27372-2

include remove_ypbind

class remove_ypbind {
  package { 'ypbind':
    ensure => 'purged',
  }
}

package --remove=ypbind

$ sudo yum erase ypserv
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove ypserv

- name: Ensure ypserv is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - ypserv
  tags:
    - package_ypserv_removed
    - medium_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27079-3
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000220

include remove_ypserv

class remove_ypserv {
  package { 'ypserv':
    ensure => 'purged',
  }
}

package --remove=ypserv

# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove tftp

- name: Ensure tftp is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - tftp
  tags:
    - package_tftp_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27448-0

include remove_tftp

class remove_tftp {
  package { 'tftp':
    ensure => 'purged',
  }
}

package --remove=tftp

$ sudo yum erase tftp-server
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove tftp-server

- name: Ensure tftp-server is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - tftp-server
  tags:
    - package_tftp-server_removed
    - medium_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-26946-4
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000222

include remove_tftp-server

class remove_tftp-server {
  package { 'tftp-server':
    ensure => 'purged',
  }
}

package --remove=tftp-server

$ sudo yum erase xinetd
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove xinetd

- name: Ensure xinetd is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - xinetd
  tags:
    - package_xinetd_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27005-8
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000204

include remove_xinetd

class remove_xinetd {
  package { 'xinetd':
    ensure => 'purged',
  }
}

package --remove=xinetd

# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove talk

- name: Ensure talk is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - talk
  tags:
    - package_talk_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27373-0

include remove_talk

class remove_talk {
  package { 'talk':
    ensure => 'purged',
  }
}

package --remove=talk

$ sudo yum erase talk-server
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove talk-server

- name: Ensure talk-server is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - talk-server
  tags:
    - package_talk-server_removed
    - medium_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27427-4

include remove_talk-server

class remove_talk-server {
  package { 'talk-server':
    ensure => 'purged',
  }
}

package --remove=talk-server

$ sudo yum erase dovecot
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove dovecot

- name: Ensure dovecot is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - dovecot
  tags:
    - package_dovecot_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27039-7

include remove_dovecot

class remove_dovecot {
  package { 'dovecot':
    ensure => 'purged',
  }
}

package --remove=dovecot

$ sudo chkconfig --level 2345 crond on
# Function to enable/disable and start/stop services on RHEL and Fedora systems.
#
# Example Call(s):
#
#     service_command enable bluetooth
#     service_command disable bluetooth.service
#
#     Using xinetd:
#     service_command disable rsh.socket xinetd=rsh
#
function service_command {

# Load function arguments into local variables
local service_state=$1
local service=$2
local xinetd=$(echo $3 | cut -d'=' -f2)

# Check sanity of the input
if [ $# -lt "2" ]
then
  echo "Usage: service_command 'enable/disable' 'service_name.service'"
  echo
  echo "To enable or disable xinetd services add \'xinetd=service_name\'"
  echo "as the last argument"  
  echo "Aborting."
  exit 1
fi

# If systemctl is installed, use systemctl command; otherwise, use the service/chkconfig commands
if [ -f "/usr/bin/systemctl" ] ; then
  service_util="/usr/bin/systemctl"
else
  service_util="/sbin/service"
  chkconfig_util="/sbin/chkconfig"
fi

# If disable is not specified in arg1, set variables to enable services.
# Otherwise, variables are to be set to disable services.
if [ "$service_state" != 'disable' ] ; then
  service_state="enable"
  service_operation="start"
  chkconfig_state="on"
else
  service_state="disable"
  service_operation="stop"
  chkconfig_state="off"
fi

# If chkconfig_util is not empty, use chkconfig/service commands.
if [ "x$chkconfig_util" != x ] ; then
  $service_util $service $service_operation
  $chkconfig_util --level 0123456 $service $chkconfig_state
else
  $service_util $service_operation $service
  $service_util $service_state $service
  # The service may not be running because it has been started and failed,
  # so let's reset the state so OVAL checks pass.
  # Service should be 'inactive', not 'failed' after reboot though.
  $service_util reset-failed $service
fi

# Test if local variable xinetd is empty using non-bashism.
# If empty, then xinetd is not being used.
if [ "x$xinetd" != x ] ; then
  grep -qi disable /etc/xinetd.d/$xinetd && \

  if [ "$service_operation" = 'disable' ] ; then
    sed -i "s/disable.*/disable         = no/gI" /etc/xinetd.d/$xinetd
  else
    sed -i "s/disable.*/disable         = yes/gI" /etc/xinetd.d/$xinetd
  fi
fi

}

service_command enable crond

- name: Enable service crond
  service:
    name="{{item}}"
    enabled="yes"
    state="started"
  with_items:
    - crond
  tags:
    - service_crond_enabled
    - medium_severity
    - enable_strategy
    - low_complexity
    - low_disruption
    - CCE-27070-2
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000224

$ sudo chkconfig atd off
# Function to enable/disable and start/stop services on RHEL and Fedora systems.
#
# Example Call(s):
#
#     service_command enable bluetooth
#     service_command disable bluetooth.service
#
#     Using xinetd:
#     service_command disable rsh.socket xinetd=rsh
#
function service_command {

# Load function arguments into local variables
local service_state=$1
local service=$2
local xinetd=$(echo $3 | cut -d'=' -f2)

# Check sanity of the input
if [ $# -lt "2" ]
then
  echo "Usage: service_command 'enable/disable' 'service_name.service'"
  echo
  echo "To enable or disable xinetd services add \'xinetd=service_name\'"
  echo "as the last argument"  
  echo "Aborting."
  exit 1
fi

# If systemctl is installed, use systemctl command; otherwise, use the service/chkconfig commands
if [ -f "/usr/bin/systemctl" ] ; then
  service_util="/usr/bin/systemctl"
else
  service_util="/sbin/service"
  chkconfig_util="/sbin/chkconfig"
fi

# If disable is not specified in arg1, set variables to enable services.
# Otherwise, variables are to be set to disable services.
if [ "$service_state" != 'disable' ] ; then
  service_state="enable"
  service_operation="start"
  chkconfig_state="on"
else
  service_state="disable"
  service_operation="stop"
  chkconfig_state="off"
fi

# If chkconfig_util is not empty, use chkconfig/service commands.
if [ "x$chkconfig_util" != x ] ; then
  $service_util $service $service_operation
  $chkconfig_util --level 0123456 $service $chkconfig_state
else
  $service_util $service_operation $service
  $service_util $service_state $service
  # The service may not be running because it has been started and failed,
  # so let's reset the state so OVAL checks pass.
  # Service should be 'inactive', not 'failed' after reboot though.
  $service_util reset-failed $service
fi

# Test if local variable xinetd is empty using non-bashism.
# If empty, then xinetd is not being used.
if [ "x$xinetd" != x ] ; then
  grep -qi disable /etc/xinetd.d/$xinetd && \

  if [ "$service_operation" = 'disable' ] ; then
    sed -i "s/disable.*/disable         = no/gI" /etc/xinetd.d/$xinetd
  else
    sed -i "s/disable.*/disable         = yes/gI" /etc/xinetd.d/$xinetd
  fi
fi

}

service_command disable atd

- name: Disable service atd
  service:
    name="{{item}}"
    enabled="no"
    state="stopped"
  register: service_result
  failed_when: "service_result|failed and ('Could not find the requested service' not in service_result.msg)"
  with_items:
    - atd
  tags:
    - service_atd_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27249-2
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000262

$ sudo chkconfig nfslock off
# Function to enable/disable and start/stop services on RHEL and Fedora systems.
#
# Example Call(s):
#
#     service_command enable bluetooth
#     service_command disable bluetooth.service
#
#     Using xinetd:
#     service_command disable rsh.socket xinetd=rsh
#
function service_command {

# Load function arguments into local variables
local service_state=$1
local service=$2
local xinetd=$(echo $3 | cut -d'=' -f2)

# Check sanity of the input
if [ $# -lt "2" ]
then
  echo "Usage: service_command 'enable/disable' 'service_name.service'"
  echo
  echo "To enable or disable xinetd services add \'xinetd=service_name\'"
  echo "as the last argument"  
  echo "Aborting."
  exit 1
fi

# If systemctl is installed, use systemctl command; otherwise, use the service/chkconfig commands
if [ -f "/usr/bin/systemctl" ] ; then
  service_util="/usr/bin/systemctl"
else
  service_util="/sbin/service"
  chkconfig_util="/sbin/chkconfig"
fi

# If disable is not specified in arg1, set variables to enable services.
# Otherwise, variables are to be set to disable services.
if [ "$service_state" != 'disable' ] ; then
  service_state="enable"
  service_operation="start"
  chkconfig_state="on"
else
  service_state="disable"
  service_operation="stop"
  chkconfig_state="off"
fi

# If chkconfig_util is not empty, use chkconfig/service commands.
if [ "x$chkconfig_util" != x ] ; then
  $service_util $service $service_operation
  $chkconfig_util --level 0123456 $service $chkconfig_state
else
  $service_util $service_operation $service
  $service_util $service_state $service
  # The service may not be running because it has been started and failed,
  # so let's reset the state so OVAL checks pass.
  # Service should be 'inactive', not 'failed' after reboot though.
  $service_util reset-failed $service
fi

# Test if local variable xinetd is empty using non-bashism.
# If empty, then xinetd is not being used.
if [ "x$xinetd" != x ] ; then
  grep -qi disable /etc/xinetd.d/$xinetd && \

  if [ "$service_operation" = 'disable' ] ; then
    sed -i "s/disable.*/disable         = no/gI" /etc/xinetd.d/$xinetd
  else
    sed -i "s/disable.*/disable         = yes/gI" /etc/xinetd.d/$xinetd
  fi
fi

}

service_command disable nfslock

- name: Disable service nfslock
  service:
    name="{{item}}"
    enabled="no"
    state="stopped"
  register: service_result
  failed_when: "service_result|failed and ('Could not find the requested service' not in service_result.msg)"
  with_items:
    - nfslock
  tags:
    - service_nfslock_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27104-9

$ sudo chkconfig rpcbind off
# Function to enable/disable and start/stop services on RHEL and Fedora systems.
#
# Example Call(s):
#
#     service_command enable bluetooth
#     service_command disable bluetooth.service
#
#     Using xinetd:
#     service_command disable rsh.socket xinetd=rsh
#
function service_command {

# Load function arguments into local variables
local service_state=$1
local service=$2
local xinetd=$(echo $3 | cut -d'=' -f2)

# Check sanity of the input
if [ $# -lt "2" ]
then
  echo "Usage: service_command 'enable/disable' 'service_name.service'"
  echo
  echo "To enable or disable xinetd services add \'xinetd=service_name\'"
  echo "as the last argument"  
  echo "Aborting."
  exit 1
fi

# If systemctl is installed, use systemctl command; otherwise, use the service/chkconfig commands
if [ -f "/usr/bin/systemctl" ] ; then
  service_util="/usr/bin/systemctl"
else
  service_util="/sbin/service"
  chkconfig_util="/sbin/chkconfig"
fi

# If disable is not specified in arg1, set variables to enable services.
# Otherwise, variables are to be set to disable services.
if [ "$service_state" != 'disable' ] ; then
  service_state="enable"
  service_operation="start"
  chkconfig_state="on"
else
  service_state="disable"
  service_operation="stop"
  chkconfig_state="off"
fi

# If chkconfig_util is not empty, use chkconfig/service commands.
if [ "x$chkconfig_util" != x ] ; then
  $service_util $service $service_operation
  $chkconfig_util --level 0123456 $service $chkconfig_state
else
  $service_util $service_operation $service
  $service_util $service_state $service
  # The service may not be running because it has been started and failed,
  # so let's reset the state so OVAL checks pass.
  # Service should be 'inactive', not 'failed' after reboot though.
  $service_util reset-failed $service
fi

# Test if local variable xinetd is empty using non-bashism.
# If empty, then xinetd is not being used.
if [ "x$xinetd" != x ] ; then
  grep -qi disable /etc/xinetd.d/$xinetd && \

  if [ "$service_operation" = 'disable' ] ; then
    sed -i "s/disable.*/disable         = no/gI" /etc/xinetd.d/$xinetd
  else
    sed -i "s/disable.*/disable         = yes/gI" /etc/xinetd.d/$xinetd
  fi
fi

}

service_command disable rpcbind

- name: Disable service rpcbind
  service:
    name="{{item}}"
    enabled="no"
    state="stopped"
  register: service_result
  failed_when: "service_result|failed and ('Could not find the requested service' not in service_result.msg)"
  with_items:
    - rpcbind
  tags:
    - service_rpcbind_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27430-8

$ sudo chkconfig rpcidmapd off
# Function to enable/disable and start/stop services on RHEL and Fedora systems.
#
# Example Call(s):
#
#     service_command enable bluetooth
#     service_command disable bluetooth.service
#
#     Using xinetd:
#     service_command disable rsh.socket xinetd=rsh
#
function service_command {

# Load function arguments into local variables
local service_state=$1
local service=$2
local xinetd=$(echo $3 | cut -d'=' -f2)

# Check sanity of the input
if [ $# -lt "2" ]
then
  echo "Usage: service_command 'enable/disable' 'service_name.service'"
  echo
  echo "To enable or disable xinetd services add \'xinetd=service_name\'"
  echo "as the last argument"  
  echo "Aborting."
  exit 1
fi

# If systemctl is installed, use systemctl command; otherwise, use the service/chkconfig commands
if [ -f "/usr/bin/systemctl" ] ; then
  service_util="/usr/bin/systemctl"
else
  service_util="/sbin/service"
  chkconfig_util="/sbin/chkconfig"
fi

# If disable is not specified in arg1, set variables to enable services.
# Otherwise, variables are to be set to disable services.
if [ "$service_state" != 'disable' ] ; then
  service_state="enable"
  service_operation="start"
  chkconfig_state="on"
else
  service_state="disable"
  service_operation="stop"
  chkconfig_state="off"
fi

# If chkconfig_util is not empty, use chkconfig/service commands.
if [ "x$chkconfig_util" != x ] ; then
  $service_util $service $service_operation
  $chkconfig_util --level 0123456 $service $chkconfig_state
else
  $service_util $service_operation $service
  $service_util $service_state $service
  # The service may not be running because it has been started and failed,
  # so let's reset the state so OVAL checks pass.
  # Service should be 'inactive', not 'failed' after reboot though.
  $service_util reset-failed $service
fi

# Test if local variable xinetd is empty using non-bashism.
# If empty, then xinetd is not being used.
if [ "x$xinetd" != x ] ; then
  grep -qi disable /etc/xinetd.d/$xinetd && \

  if [ "$service_operation" = 'disable' ] ; then
    sed -i "s/disable.*/disable         = no/gI" /etc/xinetd.d/$xinetd
  else
    sed -i "s/disable.*/disable         = yes/gI" /etc/xinetd.d/$xinetd
  fi
fi

}

service_command disable rpcidmapd

- name: Disable service rpcidmapd
  service:
    name="{{item}}"
    enabled="no"
    state="stopped"
  register: service_result
  failed_when: "service_result|failed and ('Could not find the requested service' not in service_result.msg)"
  with_items:
    - rpcidmapd
  tags:
    - service_rpcidmapd_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-26870-6

$ sudo chkconfig rpcgssd off
# Function to enable/disable and start/stop services on RHEL and Fedora systems.
#
# Example Call(s):
#
#     service_command enable bluetooth
#     service_command disable bluetooth.service
#
#     Using xinetd:
#     service_command disable rsh.socket xinetd=rsh
#
function service_command {

# Load function arguments into local variables
local service_state=$1
local service=$2
local xinetd=$(echo $3 | cut -d'=' -f2)

# Check sanity of the input
if [ $# -lt "2" ]
then
  echo "Usage: service_command 'enable/disable' 'service_name.service'"
  echo
  echo "To enable or disable xinetd services add \'xinetd=service_name\'"
  echo "as the last argument"  
  echo "Aborting."
  exit 1
fi

# If systemctl is installed, use systemctl command; otherwise, use the service/chkconfig commands
if [ -f "/usr/bin/systemctl" ] ; then
  service_util="/usr/bin/systemctl"
else
  service_util="/sbin/service"
  chkconfig_util="/sbin/chkconfig"
fi

# If disable is not specified in arg1, set variables to enable services.
# Otherwise, variables are to be set to disable services.
if [ "$service_state" != 'disable' ] ; then
  service_state="enable"
  service_operation="start"
  chkconfig_state="on"
else
  service_state="disable"
  service_operation="stop"
  chkconfig_state="off"
fi

# If chkconfig_util is not empty, use chkconfig/service commands.
if [ "x$chkconfig_util" != x ] ; then
  $service_util $service $service_operation
  $chkconfig_util --level 0123456 $service $chkconfig_state
else
  $service_util $service_operation $service
  $service_util $service_state $service
  # The service may not be running because it has been started and failed,
  # so let's reset the state so OVAL checks pass.
  # Service should be 'inactive', not 'failed' after reboot though.
  $service_util reset-failed $service
fi

# Test if local variable xinetd is empty using non-bashism.
# If empty, then xinetd is not being used.
if [ "x$xinetd" != x ] ; then
  grep -qi disable /etc/xinetd.d/$xinetd && \

  if [ "$service_operation" = 'disable' ] ; then
    sed -i "s/disable.*/disable         = no/gI" /etc/xinetd.d/$xinetd
  else
    sed -i "s/disable.*/disable         = yes/gI" /etc/xinetd.d/$xinetd
  fi
fi

}

service_command disable rpcgssd

- name: Disable service rpcgssd
  service:
    name="{{item}}"
    enabled="no"
    state="stopped"
  register: service_result
  failed_when: "service_result|failed and ('Could not find the requested service' not in service_result.msg)"
  with_items:
    - rpcgssd
  tags:
    - service_rpcgssd_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-26864-9

$ sudo chkconfig rpcsvcgssd off
# Function to enable/disable and start/stop services on RHEL and Fedora systems.
#
# Example Call(s):
#
#     service_command enable bluetooth
#     service_command disable bluetooth.service
#
#     Using xinetd:
#     service_command disable rsh.socket xinetd=rsh
#
function service_command {

# Load function arguments into local variables
local service_state=$1
local service=$2
local xinetd=$(echo $3 | cut -d'=' -f2)

# Check sanity of the input
if [ $# -lt "2" ]
then
  echo "Usage: service_command 'enable/disable' 'service_name.service'"
  echo
  echo "To enable or disable xinetd services add \'xinetd=service_name\'"
  echo "as the last argument"  
  echo "Aborting."
  exit 1
fi

# If systemctl is installed, use systemctl command; otherwise, use the service/chkconfig commands
if [ -f "/usr/bin/systemctl" ] ; then
  service_util="/usr/bin/systemctl"
else
  service_util="/sbin/service"
  chkconfig_util="/sbin/chkconfig"
fi

# If disable is not specified in arg1, set variables to enable services.
# Otherwise, variables are to be set to disable services.
if [ "$service_state" != 'disable' ] ; then
  service_state="enable"
  service_operation="start"
  chkconfig_state="on"
else
  service_state="disable"
  service_operation="stop"
  chkconfig_state="off"
fi

# If chkconfig_util is not empty, use chkconfig/service commands.
if [ "x$chkconfig_util" != x ] ; then
  $service_util $service $service_operation
  $chkconfig_util --level 0123456 $service $chkconfig_state
else
  $service_util $service_operation $service
  $service_util $service_state $service
  # The service may not be running because it has been started and failed,
  # so let's reset the state so OVAL checks pass.
  # Service should be 'inactive', not 'failed' after reboot though.
  $service_util reset-failed $service
fi

# Test if local variable xinetd is empty using non-bashism.
# If empty, then xinetd is not being used.
if [ "x$xinetd" != x ] ; then
  grep -qi disable /etc/xinetd.d/$xinetd && \

  if [ "$service_operation" = 'disable' ] ; then
    sed -i "s/disable.*/disable         = no/gI" /etc/xinetd.d/$xinetd
  else
    sed -i "s/disable.*/disable         = yes/gI" /etc/xinetd.d/$xinetd
  fi
fi

}

service_command disable rpcsvcgssd

- name: Disable service rpcsvcgssd
  service:
    name="{{item}}"
    enabled="no"
    state="stopped"
  register: service_result
  failed_when: "service_result|failed and ('Could not find the requested service' not in service_result.msg)"
  with_items:
    - rpcsvcgssd
  tags:
    - service_rpcsvcgssd_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27122-1

$ sudo chkconfig cups off
# Function to enable/disable and start/stop services on RHEL and Fedora systems.
#
# Example Call(s):
#
#     service_command enable bluetooth
#     service_command disable bluetooth.service
#
#     Using xinetd:
#     service_command disable rsh.socket xinetd=rsh
#
function service_command {

# Load function arguments into local variables
local service_state=$1
local service=$2
local xinetd=$(echo $3 | cut -d'=' -f2)

# Check sanity of the input
if [ $# -lt "2" ]
then
  echo "Usage: service_command 'enable/disable' 'service_name.service'"
  echo
  echo "To enable or disable xinetd services add \'xinetd=service_name\'"
  echo "as the last argument"  
  echo "Aborting."
  exit 1
fi

# If systemctl is installed, use systemctl command; otherwise, use the service/chkconfig commands
if [ -f "/usr/bin/systemctl" ] ; then
  service_util="/usr/bin/systemctl"
else
  service_util="/sbin/service"
  chkconfig_util="/sbin/chkconfig"
fi

# If disable is not specified in arg1, set variables to enable services.
# Otherwise, variables are to be set to disable services.
if [ "$service_state" != 'disable' ] ; then
  service_state="enable"
  service_operation="start"
  chkconfig_state="on"
else
  service_state="disable"
  service_operation="stop"
  chkconfig_state="off"
fi

# If chkconfig_util is not empty, use chkconfig/service commands.
if [ "x$chkconfig_util" != x ] ; then
  $service_util $service $service_operation
  $chkconfig_util --level 0123456 $service $chkconfig_state
else
  $service_util $service_operation $service
  $service_util $service_state $service
  # The service may not be running because it has been started and failed,
  # so let's reset the state so OVAL checks pass.
  # Service should be 'inactive', not 'failed' after reboot though.
  $service_util reset-failed $service
fi

# Test if local variable xinetd is empty using non-bashism.
# If empty, then xinetd is not being used.
if [ "x$xinetd" != x ] ; then
  grep -qi disable /etc/xinetd.d/$xinetd && \

  if [ "$service_operation" = 'disable' ] ; then
    sed -i "s/disable.*/disable         = no/gI" /etc/xinetd.d/$xinetd
  else
    sed -i "s/disable.*/disable         = yes/gI" /etc/xinetd.d/$xinetd
  fi
fi

}

service_command disable cups

- name: Disable service cups
  service:
    name="{{item}}"
    enabled="no"
    state="stopped"
  register: service_result
  failed_when: "service_result|failed and ('Could not find the requested service' not in service_result.msg)"
  with_items:
    - cups
  tags:
    - service_cups_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-26899-5
    - NIST-800-53-CM-7

$ sudo yum erase squid
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove squid

- name: Ensure squid is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - squid
  tags:
    - package_squid_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-26977-9

include remove_squid

class remove_squid {
  package { 'squid':
    ensure => 'purged',
  }
}

package --remove=squid

$ sudo chkconfig rhnsd off
# Function to enable/disable and start/stop services on RHEL and Fedora systems.
#
# Example Call(s):
#
#     service_command enable bluetooth
#     service_command disable bluetooth.service
#
#     Using xinetd:
#     service_command disable rsh.socket xinetd=rsh
#
function service_command {

# Load function arguments into local variables
local service_state=$1
local service=$2
local xinetd=$(echo $3 | cut -d'=' -f2)

# Check sanity of the input
if [ $# -lt "2" ]
then
  echo "Usage: service_command 'enable/disable' 'service_name.service'"
  echo
  echo "To enable or disable xinetd services add \'xinetd=service_name\'"
  echo "as the last argument"  
  echo "Aborting."
  exit 1
fi

# If systemctl is installed, use systemctl command; otherwise, use the service/chkconfig commands
if [ -f "/usr/bin/systemctl" ] ; then
  service_util="/usr/bin/systemctl"
else
  service_util="/sbin/service"
  chkconfig_util="/sbin/chkconfig"
fi

# If disable is not specified in arg1, set variables to enable services.
# Otherwise, variables are to be set to disable services.
if [ "$service_state" != 'disable' ] ; then
  service_state="enable"
  service_operation="start"
  chkconfig_state="on"
else
  service_state="disable"
  service_operation="stop"
  chkconfig_state="off"
fi

# If chkconfig_util is not empty, use chkconfig/service commands.
if [ "x$chkconfig_util" != x ] ; then
  $service_util $service $service_operation
  $chkconfig_util --level 0123456 $service $chkconfig_state
else
  $service_util $service_operation $service
  $service_util $service_state $service
  # The service may not be running because it has been started and failed,
  # so let's reset the state so OVAL checks pass.
  # Service should be 'inactive', not 'failed' after reboot though.
  $service_util reset-failed $service
fi

# Test if local variable xinetd is empty using non-bashism.
# If empty, then xinetd is not being used.
if [ "x$xinetd" != x ] ; then
  grep -qi disable /etc/xinetd.d/$xinetd && \

  if [ "$service_operation" = 'disable' ] ; then
    sed -i "s/disable.*/disable         = no/gI" /etc/xinetd.d/$xinetd
  else
    sed -i "s/disable.*/disable         = yes/gI" /etc/xinetd.d/$xinetd
  fi
fi

}

service_command disable rhnsd

- name: Disable service rhnsd
  service:
    name="{{item}}"
    enabled="no"
    state="stopped"
  register: service_result
  failed_when: "service_result|failed and ('Could not find the requested service' not in service_result.msg)"
  with_items:
    - rhnsd
  tags:
    - service_rhnsd_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-26846-6
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000009

inet_interfaces = localhost
$ sudo yum erase dhcp
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove dhcp

- name: Ensure dhcp is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - dhcp
  tags:
    - package_dhcp_removed
    - medium_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27120-5
    - NIST-800-53-CM-7

include remove_dhcp

class remove_dhcp {
  package { 'dhcp':
    ensure => 'purged',
  }
}

package --remove=dhcp

$ sudo chkconfig avahi-daemon off
# Function to enable/disable and start/stop services on RHEL and Fedora systems.
#
# Example Call(s):
#
#     service_command enable bluetooth
#     service_command disable bluetooth.service
#
#     Using xinetd:
#     service_command disable rsh.socket xinetd=rsh
#
function service_command {

# Load function arguments into local variables
local service_state=$1
local service=$2
local xinetd=$(echo $3 | cut -d'=' -f2)

# Check sanity of the input
if [ $# -lt "2" ]
then
  echo "Usage: service_command 'enable/disable' 'service_name.service'"
  echo
  echo "To enable or disable xinetd services add \'xinetd=service_name\'"
  echo "as the last argument"  
  echo "Aborting."
  exit 1
fi

# If systemctl is installed, use systemctl command; otherwise, use the service/chkconfig commands
if [ -f "/usr/bin/systemctl" ] ; then
  service_util="/usr/bin/systemctl"
else
  service_util="/sbin/service"
  chkconfig_util="/sbin/chkconfig"
fi

# If disable is not specified in arg1, set variables to enable services.
# Otherwise, variables are to be set to disable services.
if [ "$service_state" != 'disable' ] ; then
  service_state="enable"
  service_operation="start"
  chkconfig_state="on"
else
  service_state="disable"
  service_operation="stop"
  chkconfig_state="off"
fi

# If chkconfig_util is not empty, use chkconfig/service commands.
if [ "x$chkconfig_util" != x ] ; then
  $service_util $service $service_operation
  $chkconfig_util --level 0123456 $service $chkconfig_state
else
  $service_util $service_operation $service
  $service_util $service_state $service
  # The service may not be running because it has been started and failed,
  # so let's reset the state so OVAL checks pass.
  # Service should be 'inactive', not 'failed' after reboot though.
  $service_util reset-failed $service
fi

# Test if local variable xinetd is empty using non-bashism.
# If empty, then xinetd is not being used.
if [ "x$xinetd" != x ] ; then
  grep -qi disable /etc/xinetd.d/$xinetd && \

  if [ "$service_operation" = 'disable' ] ; then
    sed -i "s/disable.*/disable         = no/gI" /etc/xinetd.d/$xinetd
  else
    sed -i "s/disable.*/disable         = yes/gI" /etc/xinetd.d/$xinetd
  fi
fi

}

service_command disable avahi-daemon

- name: Disable service avahi-daemon
  service:
    name="{{item}}"
    enabled="no"
    state="stopped"
  register: service_result
  failed_when: "service_result|failed and ('Could not find the requested service' not in service_result.msg)"
  with_items:
    - avahi-daemon
  tags:
    - service_avahi-daemon_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27087-6
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000246

$ sudo yum groupremove "X Window System"
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove xorg-x11-server-common

- name: Ensure xorg-x11-server-common is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - xorg-x11-server-common
  tags:
    - package_xorg-x11-server-common_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27198-1
    - DISA-STIG-RHEL-06-000291

include remove_xorg-x11-server-common

class remove_xorg-x11-server-common {
  package { 'xorg-x11-server-common':
    ensure => 'purged',
  }
}

package --remove=xorg-x11-server-common

$ sudo yum erase samba
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove samba

- name: Ensure samba is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - samba
  tags:
    - package_samba_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27102-3

include remove_samba

class remove_samba {
  package { 'samba':
    ensure => 'purged',
  }
}

package --remove=samba

IgnoreRhosts yes
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/ssh/sshd_config' '^IgnoreRhosts' 'yes' 'CCE-27124-7' '%s %s'

- name: Disable SSH Support for .rhosts Files
  lineinfile:
    create: yes
    dest: /etc/ssh/sshd_config
    regexp: ^IgnoreRhosts
    line: IgnoreRhosts yes
    validate: sshd -t -f %s
  tags:
    - sshd_disable_rhosts
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-27124-7
    - NIST-800-53-AC-3
    - DISA-STIG-RHEL-06-000234

DenyUsers USER1 USER2
ClientAliveInterval (N/A)

sshd_idle_timeout_value="(N/A)"

grep -q ^ClientAliveInterval /etc/ssh/sshd_config && \
  sed -i "s/ClientAliveInterval.*/ClientAliveInterval $sshd_idle_timeout_value/g" /etc/ssh/sshd_config
if ! [ $? -eq 0 ]; then
    echo "ClientAliveInterval $sshd_idle_timeout_value" >> /etc/ssh/sshd_config
fi

- name: XCCDF Value sshd_idle_timeout_value # promote to variable
  set_fact:
    sshd_idle_timeout_value: (N/A)
  tags:
    - always

- name: Set SSH Idle Timeout Interval
  lineinfile:
    create: yes
    dest: /etc/ssh/sshd_config
    regexp: ^ClientAliveInterval
    line: "ClientAliveInterval {{ sshd_idle_timeout_value }}"
    validate: sshd -t -f %s
  #notify: restart sshd
  tags:
    - sshd_set_idle_timeout
    - unknown_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-26919-1
    - NIST-800-53-AC-2(5)
    - NIST-800-53-SA-8
    - PCI-DSS-Req-8.1.8
    - DISA-STIG-RHEL-06-000230

Banner /etc/issue
grep -q ^Banner /etc/ssh/sshd_config && \
  sed -i "s/Banner.*/Banner \/etc\/issue/g" /etc/ssh/sshd_config
if ! [ $? -eq 0 ]; then
    echo "Banner /etc/issue" >> /etc/ssh/sshd_config
fi

- name: Enable SSH Warning Banner
  lineinfile:
    create: yes
    dest: /etc/ssh/sshd_config
    regexp: ^Banner
    line: Banner /etc/issue
    validate: sshd -t -f %s
  tags:
    - sshd_enable_warning_banner
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-27112-2
    - NIST-800-53-AC-8(a)
    - DISA-STIG-RHEL-06-000240

HostbasedAuthentication no
grep -q ^HostbasedAuthentication /etc/ssh/sshd_config && \
  sed -i "s/HostbasedAuthentication.*/HostbasedAuthentication no/g" /etc/ssh/sshd_config
if ! [ $? -eq 0 ]; then
    echo "HostbasedAuthentication no" >> /etc/ssh/sshd_config
fi

- name: Disable Host-Based Authentication
  lineinfile:
    create: yes
    dest: /etc/ssh/sshd_config
    regexp: ^HostbasedAuthentication
    line: HostbasedAuthentication no
  tags:
    - disable_host_auth
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-27091-8
    - NIST-800-53-AC-3
    - DISA-STIG-RHEL-06-000236

PermitEmptyPasswords no
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/ssh/sshd_config' '^PermitEmptyPasswords' 'no' 'CCE-26887-0' '%s %s'

- name: Disable SSH Access via Empty Passwords
  lineinfile:
    create: yes
    dest: /etc/ssh/sshd_config
    regexp: ^PermitEmptyPasswords
    line: PermitEmptyPasswords no
    validate: sshd -t -f %s
  tags:
    - sshd_disable_empty_passwords
    - high_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-26887-0
    - NIST-800-53-AC-3
    - DISA-STIG-RHEL-06-000239

Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc
grep -q ^Ciphers /etc/ssh/sshd_config && \
  sed -i "s/Ciphers.*/Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc/g" /etc/ssh/sshd_config
if ! [ $? -eq 0 ]; then
    echo "Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc" >> /etc/ssh/sshd_config
fi

- name: Use Only Approved Ciphers
  lineinfile:
    create: yes
    dest: /etc/ssh/sshd_config
    regexp: ^Ciphers
    line: Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc
    validate: sshd -t -f %s
  #notify: restart sshd
  tags:
    - sshd_use_approved_ciphers
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-26555-3
    - NIST-800-53-AC-3
    - NIST-800-53-AC-17(2)
    - NIST-800-53-SI-7
    - NIST-800-53-IA-5(1)(c)
    - NIST-800-53-IA-7
    - DISA-STIG-RHEL-06-000243

PermitRootLogin no

SSHD_CONFIG='/etc/ssh/sshd_config'

# Obtain line number of first uncommented case-insensitive occurrence of Match
# block directive (possibly prefixed with whitespace) present in $SSHD_CONFIG
FIRST_MATCH_BLOCK=$(sed -n '/^[[:space:]]*Match[^\n]*/I{=;q}' $SSHD_CONFIG)

# Obtain line number of first uncommented case-insensitive occurence of
# PermitRootLogin directive (possibly prefixed with whitespace) present in
# $SSHD_CONFIG
FIRST_PERMIT_ROOT_LOGIN=$(sed -n '/^[[:space:]]*PermitRootLogin[^\n]*/I{=;q}' $SSHD_CONFIG)

# Case: Match block directive not present in $SSHD_CONFIG
if [ -z "$FIRST_MATCH_BLOCK" ]
then

    # Case: PermitRootLogin directive not present in $SSHD_CONFIG yet
    if [ -z "$FIRST_PERMIT_ROOT_LOGIN" ]
    then
        # Append 'PermitRootLogin no' at the end of $SSHD_CONFIG
        echo -e "\nPermitRootLogin no" >> $SSHD_CONFIG

    # Case: PermitRootLogin directive present in $SSHD_CONFIG already
    else
        # Replace first uncommented case-insensitive occurrence
        # of PermitRootLogin directive
        sed -i "$FIRST_PERMIT_ROOT_LOGIN s/^[[:space:]]*PermitRootLogin.*$/PermitRootLogin no/I" $SSHD_CONFIG
    fi

# Case: Match block directive present in $SSHD_CONFIG
else

    # Case: PermitRootLogin directive not present in $SSHD_CONFIG yet
    if [ -z "$FIRST_PERMIT_ROOT_LOGIN" ]
    then
        # Prepend 'PermitRootLogin no' before first uncommented
        # case-insensitive occurrence of Match block directive
        sed -i "$FIRST_MATCH_BLOCK s/^\([[:space:]]*Match[^\n]*\)/PermitRootLogin no\n\1/I" $SSHD_CONFIG

    # Case: PermitRootLogin directive present in $SSHD_CONFIG and placed
    #       before first Match block directive
    elif [ "$FIRST_PERMIT_ROOT_LOGIN" -lt "$FIRST_MATCH_BLOCK" ]
    then
        # Replace first uncommented case-insensitive occurrence
        # of PermitRootLogin directive
        sed -i "$FIRST_PERMIT_ROOT_LOGIN s/^[[:space:]]*PermitRootLogin.*$/PermitRootLogin no/I" $SSHD_CONFIG

    # Case: PermitRootLogin directive present in $SSHD_CONFIG and placed
    # after first Match block directive
    else
         # Prepend 'PermitRootLogin no' before first uncommented
         # case-insensitive occurrence of Match block directive
         sed -i "$FIRST_MATCH_BLOCK s/^\([[:space:]]*Match[^\n]*\)/PermitRootLogin no\n\1/I" $SSHD_CONFIG
    fi
fi

- name: "Disable SSH Root Login"
  lineinfile:
    create: yes
    dest: "/etc/ssh/sshd_config"
    regexp: "^PermitRootLogin"
    line: "PermitRootLogin no"
    insertafter: '(?i)^#?authentication'
    validate: sshd -t -f %s
  #notify: restart sshd
  tags:
    - sshd_disable_root_login
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-27100-7
    - NIST-800-53-AC-3
    - NIST-800-53-AC-6(2)
    - NIST-800-53-IA-2(1)
    - DISA-STIG-RHEL-06-000237

Protocol 2
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/ssh/sshd_config' '^Protocol' '2' 'CCE-27072-8' '%s %s'

- name: "Allow Only SSH Protocol 2"
  lineinfile:
    dest: /etc/ssh/sshd_config
    regexp: "^Protocol [0-9]"
    line: "Protocol 2"
    validate: sshd -t -f %s
  #notify: :reload ssh
  tags:
    - sshd_allow_only_protocol2
    - high_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-27072-8
    - NIST-800-53-AC-3(10)
    - NIST-800-53-IA-5(1)(c)
    - DISA-STIG-RHEL-06-000227

$ rpm -qVa
$ rpm -Va | grep '^.M'
$ rpm -qf FILENAME
$ sudo rpm --setperms PACKAGENAME

# Declare array to hold list of RPM packages we need to correct permissions for
declare -a SETPERMS_RPM_LIST

# Create a list of files on the system having permissions different from what
# is expected by the RPM database
FILES_WITH_INCORRECT_PERMS=($(rpm -Va --nofiledigest | grep '^.M' | cut -d ' ' -f4-))

# For each file path from that list:
# * Determine the RPM package the file path is shipped by,
# * Include it into SETPERMS_RPM_LIST array

for FILE_PATH in "${FILES_WITH_INCORRECT_PERMS[@]}"
do
	RPM_PACKAGE=$(rpm -qf "$FILE_PATH")
	SETPERMS_RPM_LIST=("${SETPERMS_RPM_LIST[@]}" "$RPM_PACKAGE")
done

# Remove duplicate mention of same RPM in $SETPERMS_RPM_LIST (if any)
SETPERMS_RPM_LIST=( $(echo "${SETPERMS_RPM_LIST[@]}" | tr ' ' '\n' | sort -u | tr '\n' ' ') )

# For each of the RPM packages left in the list -- reset its permissions to the
# correct values
for RPM_PACKAGE in "${SETPERMS_RPM_LIST[@]}"
do
	rpm --setperms "${RPM_PACKAGE}"
done

- name: "Read list of files with incorrect permissions"
  shell: "rpm -Va | grep '^.M' | cut -d ' ' -f5- | sed -r 's;^.*\\s+(.+);\\1;g'"
  register: files_with_incorrect_permissions
  failed_when: False
  changed_when: False
  check_mode: no
  tags:
    - rpm_verify_permissions
    - unknown_severity
    - restrict_strategy
    - high_complexity
    - medium_disruption
    - CCE-26731-0
    - NIST-800-53-AC-6
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-11.5
    - DISA-STIG-RHEL-06-000518

- name: "Correct file permissions with RPM"
  shell: "rpm --setperms $(rpm -qf '{{item}}')"
  with_items: "{{ files_with_incorrect_permissions.stdout_lines }}"
  when: files_with_incorrect_permissions.stdout_lines | length > 0
  tags:
    - rpm_verify_permissions
    - unknown_severity
    - restrict_strategy
    - high_complexity
    - medium_disruption
    - CCE-26731-0
    - NIST-800-53-AC-6
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-11.5
    - DISA-STIG-RHEL-06-000518

$ rpm -Va | grep '^..5'
$ rpm -qf FILENAME
$ sudo yum reinstall PACKAGENAME
$ sudo rpm -Uvh PACKAGENAME
- name: "Set fact: Package manager reinstall command (dnf)"
  set_fact:
    package_manager_reinstall_cmd: dnf reinstall -y
  when: ansible_distribution == "Fedora"
  tags:
    - rpm_verify_hashes
    - unknown_severity
    - unknown_strategy
    - high_complexity
    - medium_disruption
    - CCE-27223-7
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-11.5
    - DISA-STIG-RHEL-06-000519

- name: "Set fact: Package manager reinstall command (yum)"
  set_fact:
    package_manager_reinstall_cmd: yum reinstall -y
  when: ansible_distribution == "RedHat" or ansible_distribution == "OracleLinux"
  tags:
    - rpm_verify_hashes
    - unknown_severity
    - unknown_strategy
    - high_complexity
    - medium_disruption
    - CCE-27223-7
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-11.5
    - DISA-STIG-RHEL-06-000519

- name: "Read files with incorrect hash"
  shell: "rpm -Va | grep -E '^..5.* /(bin|sbin|lib|lib64|usr)/' | sed -r 's;^.*\\s+(.+);\\1;g'"
  register: files_with_incorrect_hash
  changed_when: False
  when: package_manager_reinstall_cmd is defined
  check_mode: no
  tags:
    - rpm_verify_hashes
    - unknown_severity
    - unknown_strategy
    - high_complexity
    - medium_disruption
    - CCE-27223-7
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-11.5
    - DISA-STIG-RHEL-06-000519

- name: "Reinstall packages of files with incorrect hash"
  shell: "{{package_manager_reinstall_cmd}} $(rpm -qf '{{item}}')"
  with_items: "{{ files_with_incorrect_hash.stdout_lines }}"
  when: package_manager_reinstall_cmd is defined and (files_with_incorrect_hash.stdout_lines | length > 0)
  tags:
    - rpm_verify_hashes
    - unknown_severity
    - unknown_strategy
    - high_complexity
    - medium_disruption
    - CCE-27223-7
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-11.5
    - DISA-STIG-RHEL-06-000519

$ sudo yum install aide
# Function to install packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_install aide
#
function package_install {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_install 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if ! rpm -q --quiet "$package"; then
    dnf install -y "$package"
  fi
elif which yum ; then
  if ! rpm -q --quiet "$package"; then
    yum install -y "$package"
  fi
elif which apt-get ; then
  apt-get install -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_install aide

- name: Ensure aide is installed
  package:
    name="{{item}}"
    state=present
  with_items:
    - aide
  tags:
    - package_aide_installed
    - medium_severity
    - enable_strategy
    - low_complexity
    - low_disruption
    - CCE-27024-9
    - NIST-800-53-CM-3(d)
    - NIST-800-53-CM-3(e)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SC-28
    - NIST-800-53-SI-7
    - PCI-DSS-Req-11.5
    - DISA-STIG-RHEL-06-000016

include install_aide

class install_aide {
  package { 'aide':
    ensure => 'installed',
  }
}

package --add=aide

05 4 * * * root /usr/sbin/aide --check
# Function to install packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_install aide
#
function package_install {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_install 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if ! rpm -q --quiet "$package"; then
    dnf install -y "$package"
  fi
elif which yum ; then
  if ! rpm -q --quiet "$package"; then
    yum install -y "$package"
  fi
elif which apt-get ; then
  apt-get install -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_install aide

if ! grep -q "/usr/sbin/aide --check" /etc/crontab ; then
    echo "05 4 * * * root /usr/sbin/aide --check" >> /etc/crontab
fi

- name: "Ensure AIDE is installed"
  package:
    name="{{item}}"
    state=present
  with_items:
    - aide
  tags:
    - aide_periodic_cron_checking
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-27222-9
    - NIST-800-53-CM-3(d)
    - NIST-800-53-CM-3(e)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SC-28
    - NIST-800-53-SI-7
    - PCI-DSS-Req-11.5
    - DISA-STIG-RHEL-06-000306

- name: "Configure Periodic Execution of AIDE"
  cron:
    name: "run AIDE check"
    minute: 05
    hour: 04
    weekday: 0
    user: root
    job: "/usr/sbin/aide --check"
  tags:
    - aide_periodic_cron_checking
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-27222-9
    - NIST-800-53-CM-3(d)
    - NIST-800-53-CM-3(e)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SC-28
    - NIST-800-53-SI-7
    - PCI-DSS-Req-11.5
    - DISA-STIG-RHEL-06-000306

$ sudo /usr/sbin/aide --init
$ sudo cp /var/lib/aide/aide.db.new.gz /var/lib/aide/aide.db.gz
$ sudo /usr/sbin/aide --check
# Function to install packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_install aide
#
function package_install {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_install 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if ! rpm -q --quiet "$package"; then
    dnf install -y "$package"
  fi
elif which yum ; then
  if ! rpm -q --quiet "$package"; then
    yum install -y "$package"
  fi
elif which apt-get ; then
  apt-get install -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_install aide

/usr/sbin/aide --init
/bin/cp -p /var/lib/aide/aide.db.new.gz /var/lib/aide/aide.db.gz

- name: "Ensure AIDE is installed"
  package:
    name="{{item}}"
    state=present
  with_items:
    - aide
  tags:
    - aide_build_database
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-27135-3
    - NIST-800-53-CM-3(d)
    - NIST-800-53-CM-3(e)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SC-28
    - NIST-800-53-SI-7
    - PCI-DSS-Req-11.5
    - DISA-STIG-RHEL-06-000018

- name: "Build and Test AIDE Database"
  shell: /usr/sbin/aide --init
  tags:
    - aide_build_database
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-27135-3
    - NIST-800-53-CM-3(d)
    - NIST-800-53-CM-3(e)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SC-28
    - NIST-800-53-SI-7
    - PCI-DSS-Req-11.5
    - DISA-STIG-RHEL-06-000018

- name: Stage AIDE Database"
  copy:
    src: /var/lib/aide/aide.db.new.gz
    dest: /var/lib/aide/aide.db.gz
    backup: yes
    remote_src: yes
  tags:
    - aide_build_database
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-27135-3
    - NIST-800-53-CM-3(d)
    - NIST-800-53-CM-3(e)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SC-28
    - NIST-800-53-SI-7
    - PCI-DSS-Req-11.5
    - DISA-STIG-RHEL-06-000018

PRELINKING=no
$ sudo /usr/sbin/prelink -ua
#
# Disable prelinking altogether
#
if grep -q ^PRELINKING /etc/sysconfig/prelink
then
  sed -i 's/PRELINKING.*/PRELINKING=no/g' /etc/sysconfig/prelink
else
  echo -e "\n# Set PRELINKING=no per security requirements" >> /etc/sysconfig/prelink
  echo "PRELINKING=no" >> /etc/sysconfig/prelink
fi

#
# Undo previous prelink changes to binaries
#
/usr/sbin/prelink -ua

- name: Does prelink file exist
  stat:
    path=/etc/sysconfig/prelink
  register: prelink_exists
  tags:
    - disable_prelink
    - unknown_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-27221-1
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SC-28
    - NIST-800-53-SI-7
    - PCI-DSS-Req-11.5  

- name: disable prelinking
  lineinfile:
    path: /etc/sysconfig/prelink
    regexp: '^PRELINKING='
    line: 'PRELINKING=no'
  when: prelink_exists.stat.exists == True
  tags:
    - disable_prelink
    - unknown_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-27221-1
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SC-28
    - NIST-800-53-SI-7
    - PCI-DSS-Req-11.5

gpgcheck=1
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/yum.conf' '^gpgcheck' '1' 'CCE-26709-6'

- name: Check existence of yum on Fedora
  stat:
    path: /etc/yum.conf
  register: yum_config_file
  check_mode: no
  when: ansible_distribution == "Fedora"

# Old versions of Fedora use yum

- name: Ensure GPG check is globally activated (yum)
  ini_file:
    dest: "{{item}}"
    section: main
    option: gpgcheck
    value: 1
    create: False
  with_items: "/etc/yum.conf"
  when: ansible_distribution == "RedHat" or ansible_distribution == "CentOS" or yum_config_file.stat.exists
  tags:
    - ensure_gpgcheck_globally_activated
    - medium_severity
    - unknown_strategy
    - low_complexity
    - medium_disruption
    - CCE-26709-6
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - PCI-DSS-Req-6.2
    - DISA-STIG-RHEL-06-000013

- name: Ensure GPG check is globally activated (dnf)
  ini_file:
    dest: "{{item}}"
    section: main
    option: gpgcheck
    value: 1
    create: False
  with_items: "/etc/dnf/dnf.conf"
  when: ansible_distribution == "Fedora"
  tags:
    - ensure_gpgcheck_globally_activated
    - medium_severity
    - unknown_strategy
    - low_complexity
    - medium_disruption
    - CCE-26709-6
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - PCI-DSS-Req-6.2
    - DISA-STIG-RHEL-06-000013

$ sudo subscription-manager register
$ sudo rpm --import /media/cdrom/RPM-GPG-KEY
# The two fingerprints below are retrieved from https://access.redhat.com/security/team/key
readonly REDHAT_RELEASE_2_FINGERPRINT="567E 347A D004 4ADE 55BA 8A5F 199E 2F91 FD43 1D51"
readonly REDHAT_AUXILIARY_FINGERPRINT="43A6 E49C 4A38 F4BE 9ABF 2A53 4568 9C88 2FA6 58E0"
# Location of the key we would like to import (once it's integrity verified)
readonly REDHAT_RELEASE_KEY="/etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release"

RPM_GPG_DIR_PERMS=$(stat -c %a "$(dirname "$REDHAT_RELEASE_KEY")")

# Verify /etc/pki/rpm-gpg directory permissions are safe
if [ "${RPM_GPG_DIR_PERMS}" -le "755" ]
then
  # If they are safe, try to obtain fingerprints from the key file
  # (to ensure there won't be e.g. CRC error).
  IFS=$'\n' GPG_OUT=($(gpg --with-fingerprint "${REDHAT_RELEASE_KEY}" | grep 'Key fingerprint ='))
  GPG_RESULT=$?
  # Reset IFS back to default
  unset IFS
  # No CRC error, safe to proceed
  if [ "${GPG_RESULT}" -eq "0" ]
  then
    tr -s ' ' <<< "${GPG_OUT}" | grep -vE "${REDHAT_RELEASE_2_FINGERPRINT}|${REDHAT_AUXILIARY_FINGERPRINT}" || {
      # If file doesn't contains any keys with unknown fingerprint, import it
      rpm --import "${REDHAT_RELEASE_KEY}"
    }
  fi
fi

- name: "Read permission of GPG key directory"
  stat:
    path: /etc/pki/rpm-gpg/
  register: gpg_key_directory_permission
  check_mode: no
  tags:
    - ensure_redhat_gpgkey_installed
    - high_severity
    - restrict_strategy
    - medium_complexity
    - medium_disruption
    - CCE-26506-6
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - PCI-DSS-Req-6.2
    - DISA-STIG-RHEL-06-000008

# It should fail if it doesn't find any fingerprints in file - maybe file was not parsed well.

- name: Read signatures in GPG key
  shell: gpg --with-fingerprint '/etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release' | grep 'Key fingerprint =' | tr -s ' ' | sed 's;.*= ;;g'
  changed_when: False
  register: gpg_fingerprints
  check_mode: no
  tags:
    - ensure_redhat_gpgkey_installed
    - high_severity
    - restrict_strategy
    - medium_complexity
    - medium_disruption
    - CCE-26506-6
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - PCI-DSS-Req-6.2
    - DISA-STIG-RHEL-06-000008

- name: Set Fact - Valid fingerprints
  set_fact:
     gpg_valid_fingerprints: ("567E 347A D004 4ADE 55BA 8A5F 199E 2F91 FD43 1D51" "43A6 E49C 4A38 F4BE 9ABF 2A53 4568 9C88 2FA6 58E0")
  tags:
    - ensure_redhat_gpgkey_installed
    - high_severity
    - restrict_strategy
    - medium_complexity
    - medium_disruption
    - CCE-26506-6
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - PCI-DSS-Req-6.2
    - DISA-STIG-RHEL-06-000008

- name: Import RedHat GPG key
  rpm_key:
    state: present
    key: /etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
  when:
    (gpg_key_directory_permission.stat.mode <= '0755')
    and (( gpg_fingerprints.stdout_lines | difference(gpg_valid_fingerprints)) | length == 0)
    and (gpg_fingerprints.stdout_lines | length > 0)
    and (ansible_distribution == "RedHat")
  tags:
    - ensure_redhat_gpgkey_installed
    - high_severity
    - restrict_strategy
    - medium_complexity
    - medium_disruption
    - CCE-26506-6
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - PCI-DSS-Req-6.2
    - DISA-STIG-RHEL-06-000008

gpgcheck=0
sed -i 's/gpgcheck=.*/gpgcheck=1/g' /etc/yum.repos.d/*

#
- name: Find All Yum Repositories
  find:
    paths: "/etc/yum.repos.d/"
    patterns: "*.repo"
  register: yum_find

- name: Ensure gpgcheck Enabled For All Yum Package Repositories
  with_items: "{{ yum_find.files }}"
  lineinfile:
    create: yes
    dest: "{{ item.path }}"
    regexp: '^gpgcheck'
    line: 'gpgcheck=1'
  tags:
    - ensure_gpgcheck_never_disabled
    - low_severity
    - unknown_strategy
    - low_complexity
    - medium_disruption
    - CCE-26647-8
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - PCI-DSS-Req-6.2
    - DISA-STIG-RHEL-06-000015

*.* @loghost.example.com
*.* @@loghost.example.com
*.* :omrelp:loghost.example.com

rsyslog_remote_loghost_address="(N/A)"
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/rsyslog.conf' '^\*\.\*' "@@$rsyslog_remote_loghost_address" 'CCE-26801-1' '%s %s'

- name: XCCDF Value rsyslog_remote_loghost_address # promote to variable
  set_fact:
    rsyslog_remote_loghost_address: (N/A)
  tags:
    - always

- name: "Set rsyslog remote loghost"
  lineinfile:
    dest: /etc/rsyslog.conf
    regexp: "^\\*\\.\\*"
    line: "*.* @@{{ rsyslog_remote_loghost_address }}"
    create: yes
  tags:
    - rsyslog_remote_loghost
    - unknown_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-26801-1
    - NIST-800-53-AU-3(2)
    - NIST-800-53-AU-9
    - DISA-STIG-RHEL-06-000136

*.info;mail.none;authpriv.none;cron.none                /var/log/messages
authpriv.*                                              /var/log/secure
mail.*                                                  -/var/log/maillog
cron.*                                                  /var/log/cron
*.emerg                                                 *
uucp,news.crit                                          /var/log/spooler
local7.*                                                /var/log/boot.log
$ ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
$ ls -l LOGFILE
$ sudo chmod 0600 LOGFILE

# List of log file paths to be inspected for correct permissions
# * Primarily inspect log file paths listed in /etc/rsyslog.conf
RSYSLOG_ETC_CONFIG="/etc/rsyslog.conf"
# * And also the log file paths listed after rsyslog's $IncludeConfig directive
#   (store the result into array for the case there's shell glob used as value of IncludeConfig)
RSYSLOG_INCLUDE_CONFIG=($(grep -e "\$IncludeConfig[[:space:]]\+[^[:space:];]\+" /etc/rsyslog.conf | cut -d ' ' -f 2))
# Declare an array to hold the final list of different log file paths
declare -a LOG_FILE_PATHS

# Browse each file selected above as containing paths of log files
# ('/etc/rsyslog.conf' and '/etc/rsyslog.d/*.conf' in the default configuration)
for LOG_FILE in "${RSYSLOG_ETC_CONFIG}" "${RSYSLOG_INCLUDE_CONFIG[@]}"
do
	# From each of these files extract just particular log file path(s), thus:
	# * Ignore lines starting with space (' '), comment ('#"), or variable syntax ('$') characters,
	# * Ignore empty lines,
	# * From the remaining valid rows select only fields constituting a log file path
	# Text file column is understood to represent a log file path if and only if all of the following are met:
	# * it contains at least one slash '/' character,
	# * it doesn't contain space (' '), colon (':'), and semicolon (';') characters
	# Search log file for path(s) only in case it exists!
	if [[ -f "${LOG_FILE}" ]]
	then
		MATCHED_ITEMS=$(sed -e "/^[[:space:]|#|$]/d ; s/[^\/]*[[:space:]]*\([^:;[:space:]]*\)/\1/g ; /^$/d" "${LOG_FILE}")
		# Since above sed command might return more than one item (delimited by newline), split the particular
		# matches entries into new array specific for this log file
		readarray -t ARRAY_FOR_LOG_FILE <<< "$MATCHED_ITEMS"
		# Concatenate the two arrays - previous content of $LOG_FILE_PATHS array with
		# items from newly created array for this log file
		LOG_FILE_PATHS=("${LOG_FILE_PATHS[@]}" "${ARRAY_FOR_LOG_FILE[@]}")
		# Delete the temporary array
		unset ARRAY_FOR_LOG_FILE
	fi
done

for PATH in "${LOG_FILE_PATHS[@]}"
do
	# Sanity check - if particular $PATH is empty string, skip it from further processing
	if [ -z "$PATH" ]
	then
		continue
	fi
	# Per https://access.redhat.com/solutions/66805 '/var/log/boot.log' log file needs special care => perform it
	if [ "$PATH" == "/var/log/boot.log" ]
	then
		# Ensure permissions of /var/log/boot.log are configured to be updated in /etc/rc.local
		if ! /bin/grep -q "boot.log" "/etc/rc.local"
		then
			echo "/bin/chmod 600 /var/log/boot.log" >> /etc/rc.local
		fi
		# Ensure /etc/rc.d/rc.local has user-executable permission
		# (in order to be actually executed during boot)
		if [ "$(/usr/bin/stat -c %a /etc/rc.d/rc.local)" -ne 744 ]
		then
			/bin/chmod u+x /etc/rc.d/rc.local
		fi
	fi
	# Also for each log file check if its permissions differ from 600. If so, correct them
	if [ "$(/usr/bin/stat -c %a "$PATH")" -ne 600 ]
	then
		/bin/chmod 600 "$PATH"
	fi
done

$ModLoad imtcp
$InputTCPServerRun port
$ModLoad imudp
$UDPServerRun port
$ModLoad imrelp
$InputRELPServerRun port
/var/log/messages /var/log/secure /var/log/maillog /var/log/spooler \
  /var/log/boot.log /var/log/cron {
# rotate log files frequency
daily

LOGROTATE_CONF_FILE="/etc/logrotate.conf"
CRON_DAILY_LOGROTATE_FILE="/etc/cron.daily/logrotate"

# daily rotation is configured
grep -q "^daily$" $LOGROTATE_CONF_FILE|| echo "daily" >> $LOGROTATE_CONF_FILE

# remove any line configuring weekly, monthly or yearly rotation
sed -i -r "/^(weekly|monthly|yearly)$/d" $LOGROTATE_CONF_FILE

# configure cron.daily if not already
if ! grep -q "^[[:space:]]*/usr/sbin/logrotate[[:alnum:][:blank:][:punct:]]*$LOGROTATE_CONF_FILE$" $CRON_DAILY_LOGROTATE_FILE; then
	echo "#!/bin/sh" > $CRON_DAILY_LOGROTATE_FILE
	echo "/usr/sbin/logrotate $LOGROTATE_CONF_FILE" >> $CRON_DAILY_LOGROTATE_FILE
fi

$ sudo chkconfig --level 2345 rsyslog on
# Function to enable/disable and start/stop services on RHEL and Fedora systems.
#
# Example Call(s):
#
#     service_command enable bluetooth
#     service_command disable bluetooth.service
#
#     Using xinetd:
#     service_command disable rsh.socket xinetd=rsh
#
function service_command {

# Load function arguments into local variables
local service_state=$1
local service=$2
local xinetd=$(echo $3 | cut -d'=' -f2)

# Check sanity of the input
if [ $# -lt "2" ]
then
  echo "Usage: service_command 'enable/disable' 'service_name.service'"
  echo
  echo "To enable or disable xinetd services add \'xinetd=service_name\'"
  echo "as the last argument"  
  echo "Aborting."
  exit 1
fi

# If systemctl is installed, use systemctl command; otherwise, use the service/chkconfig commands
if [ -f "/usr/bin/systemctl" ] ; then
  service_util="/usr/bin/systemctl"
else
  service_util="/sbin/service"
  chkconfig_util="/sbin/chkconfig"
fi

# If disable is not specified in arg1, set variables to enable services.
# Otherwise, variables are to be set to disable services.
if [ "$service_state" != 'disable' ] ; then
  service_state="enable"
  service_operation="start"
  chkconfig_state="on"
else
  service_state="disable"
  service_operation="stop"
  chkconfig_state="off"
fi

# If chkconfig_util is not empty, use chkconfig/service commands.
if [ "x$chkconfig_util" != x ] ; then
  $service_util $service $service_operation
  $chkconfig_util --level 0123456 $service $chkconfig_state
else
  $service_util $service_operation $service
  $service_util $service_state $service
  # The service may not be running because it has been started and failed,
  # so let's reset the state so OVAL checks pass.
  # Service should be 'inactive', not 'failed' after reboot though.
  $service_util reset-failed $service
fi

# Test if local variable xinetd is empty using non-bashism.
# If empty, then xinetd is not being used.
if [ "x$xinetd" != x ] ; then
  grep -qi disable /etc/xinetd.d/$xinetd && \

  if [ "$service_operation" = 'disable' ] ; then
    sed -i "s/disable.*/disable         = no/gI" /etc/xinetd.d/$xinetd
  else
    sed -i "s/disable.*/disable         = yes/gI" /etc/xinetd.d/$xinetd
  fi
fi

}

service_command enable rsyslog

- name: Enable service rsyslog
  service:
    name="{{item}}"
    enabled="yes"
    state="started"
  with_items:
    - rsyslog
  tags:
    - service_rsyslog_enabled
    - medium_severity
    - enable_strategy
    - low_complexity
    - low_disruption
    - CCE-26807-8
    - NIST-800-53-AU-12

$ sudo yum install rsyslog
# Function to install packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_install aide
#
function package_install {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_install 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if ! rpm -q --quiet "$package"; then
    dnf install -y "$package"
  fi
elif which yum ; then
  if ! rpm -q --quiet "$package"; then
    yum install -y "$package"
  fi
elif which apt-get ; then
  apt-get install -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_install rsyslog

- name: Ensure rsyslog is installed
  package:
    name="{{item}}"
    state=present
  with_items:
    - rsyslog
  tags:
    - package_rsyslog_installed
    - medium_severity
    - enable_strategy
    - low_complexity
    - low_disruption
    - CCE-26809-4
    - NIST-800-53-AU-9(2)

include install_rsyslog

class install_rsyslog {
  package { 'rsyslog':
    ensure => 'installed',
  }
}

package --add=rsyslog

$ sudo iptables -nL --line-numbers
$ sudo service iptables restart
Chain INPUT (policy ACCEPT)
num  target     prot opt source       destination
1    ACCEPT     all  --  0.0.0.0/0    0.0.0.0/0    state RELATED,ESTABLISHED 
2    ACCEPT     icmp --  0.0.0.0/0    0.0.0.0/0
3    ACCEPT     all  --  0.0.0.0/0    0.0.0.0/0
4    ACCEPT     tcp  --  0.0.0.0/0    0.0.0.0/0    state NEW tcp dpt:22 
5    REJECT     all  --  0.0.0.0/0    0.0.0.0/0    reject-with icmp-host-prohibited 

Chain FORWARD (policy ACCEPT)
num  target     prot opt source       destination
1    REJECT     all  --  0.0.0.0/0    0.0.0.0/0    reject-with icmp-host-prohibited 

Chain OUTPUT (policy ACCEPT)
num  target     prot opt source       destination
$ sudo chkconfig --level 2345 ip6tables on
# Function to enable/disable and start/stop services on RHEL and Fedora systems.
#
# Example Call(s):
#
#     service_command enable bluetooth
#     service_command disable bluetooth.service
#
#     Using xinetd:
#     service_command disable rsh.socket xinetd=rsh
#
function service_command {

# Load function arguments into local variables
local service_state=$1
local service=$2
local xinetd=$(echo $3 | cut -d'=' -f2)

# Check sanity of the input
if [ $# -lt "2" ]
then
  echo "Usage: service_command 'enable/disable' 'service_name.service'"
  echo
  echo "To enable or disable xinetd services add \'xinetd=service_name\'"
  echo "as the last argument"  
  echo "Aborting."
  exit 1
fi

# If systemctl is installed, use systemctl command; otherwise, use the service/chkconfig commands
if [ -f "/usr/bin/systemctl" ] ; then
  service_util="/usr/bin/systemctl"
else
  service_util="/sbin/service"
  chkconfig_util="/sbin/chkconfig"
fi

# If disable is not specified in arg1, set variables to enable services.
# Otherwise, variables are to be set to disable services.
if [ "$service_state" != 'disable' ] ; then
  service_state="enable"
  service_operation="start"
  chkconfig_state="on"
else
  service_state="disable"
  service_operation="stop"
  chkconfig_state="off"
fi

# If chkconfig_util is not empty, use chkconfig/service commands.
if [ "x$chkconfig_util" != x ] ; then
  $service_util $service $service_operation
  $chkconfig_util --level 0123456 $service $chkconfig_state
else
  $service_util $service_operation $service
  $service_util $service_state $service
  # The service may not be running because it has been started and failed,
  # so let's reset the state so OVAL checks pass.
  # Service should be 'inactive', not 'failed' after reboot though.
  $service_util reset-failed $service
fi

# Test if local variable xinetd is empty using non-bashism.
# If empty, then xinetd is not being used.
if [ "x$xinetd" != x ] ; then
  grep -qi disable /etc/xinetd.d/$xinetd && \

  if [ "$service_operation" = 'disable' ] ; then
    sed -i "s/disable.*/disable         = no/gI" /etc/xinetd.d/$xinetd
  else
    sed -i "s/disable.*/disable         = yes/gI" /etc/xinetd.d/$xinetd
  fi
fi

}

service_command enable ip6tables

- name: Enable service ip6tables
  service:
    name="{{item}}"
    enabled="yes"
    state="started"
  with_items:
    - ip6tables
  tags:
    - service_ip6tables_enabled
    - medium_severity
    - enable_strategy
    - low_complexity
    - low_disruption
    - CCE-27006-6
    - NIST-800-53-AC-4
    - NIST-800-53-CA-3(c)
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000103

$ sudo chkconfig --level 2345 iptables on
# Function to enable/disable and start/stop services on RHEL and Fedora systems.
#
# Example Call(s):
#
#     service_command enable bluetooth
#     service_command disable bluetooth.service
#
#     Using xinetd:
#     service_command disable rsh.socket xinetd=rsh
#
function service_command {

# Load function arguments into local variables
local service_state=$1
local service=$2
local xinetd=$(echo $3 | cut -d'=' -f2)

# Check sanity of the input
if [ $# -lt "2" ]
then
  echo "Usage: service_command 'enable/disable' 'service_name.service'"
  echo
  echo "To enable or disable xinetd services add \'xinetd=service_name\'"
  echo "as the last argument"  
  echo "Aborting."
  exit 1
fi

# If systemctl is installed, use systemctl command; otherwise, use the service/chkconfig commands
if [ -f "/usr/bin/systemctl" ] ; then
  service_util="/usr/bin/systemctl"
else
  service_util="/sbin/service"
  chkconfig_util="/sbin/chkconfig"
fi

# If disable is not specified in arg1, set variables to enable services.
# Otherwise, variables are to be set to disable services.
if [ "$service_state" != 'disable' ] ; then
  service_state="enable"
  service_operation="start"
  chkconfig_state="on"
else
  service_state="disable"
  service_operation="stop"
  chkconfig_state="off"
fi

# If chkconfig_util is not empty, use chkconfig/service commands.
if [ "x$chkconfig_util" != x ] ; then
  $service_util $service $service_operation
  $chkconfig_util --level 0123456 $service $chkconfig_state
else
  $service_util $service_operation $service
  $service_util $service_state $service
  # The service may not be running because it has been started and failed,
  # so let's reset the state so OVAL checks pass.
  # Service should be 'inactive', not 'failed' after reboot though.
  $service_util reset-failed $service
fi

# Test if local variable xinetd is empty using non-bashism.
# If empty, then xinetd is not being used.
if [ "x$xinetd" != x ] ; then
  grep -qi disable /etc/xinetd.d/$xinetd && \

  if [ "$service_operation" = 'disable' ] ; then
    sed -i "s/disable.*/disable         = no/gI" /etc/xinetd.d/$xinetd
  else
    sed -i "s/disable.*/disable         = yes/gI" /etc/xinetd.d/$xinetd
  fi
fi

}

service_command enable iptables

- name: Enable service iptables
  service:
    name="{{item}}"
    enabled="yes"
    state="started"
  with_items:
    - iptables
  tags:
    - service_iptables_enabled
    - medium_severity
    - enable_strategy
    - low_complexity
    - low_disruption
    - CCE-27018-1
    - NIST-800-53-AC-4
    - NIST-800-53-CA-3(c)
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000117

IPV6_AUTOCONF=no
$ sudo sysctl -w net.ipv6.conf.default.accept_ra=0
net.ipv6.conf.default.accept_ra = 0

sysctl_net_ipv6_conf_default_accept_ra_value="(N/A)"

#
# Set runtime for net.ipv6.conf.default.accept_ra
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_ra=$sysctl_net_ipv6_conf_default_accept_ra_value

#
# If net.ipv6.conf.default.accept_ra present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_ra = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv6.conf.default.accept_ra' "$sysctl_net_ipv6_conf_default_accept_ra_value" 'CCE-27164-3'

- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_ra_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_ra_value: (N/A)
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_ra is set
  sysctl:
    name: net.ipv6.conf.default.accept_ra
    value: "{{ sysctl_net_ipv6_conf_default_accept_ra_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv6_conf_default_accept_ra
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-27164-3
    - NIST-800-53-CM-7

$ sudo sysctl -w net.ipv6.conf.default.accept_redirects=0
net.ipv6.conf.default.accept_redirects = 0

sysctl_net_ipv6_conf_default_accept_redirects_value="(N/A)"

#
# Set runtime for net.ipv6.conf.default.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_redirects=$sysctl_net_ipv6_conf_default_accept_redirects_value

#
# If net.ipv6.conf.default.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_redirects = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv6.conf.default.accept_redirects' "$sysctl_net_ipv6_conf_default_accept_redirects_value" 'CCE-27166-8'

- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_redirects_value: (N/A)
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_redirects is set
  sysctl:
    name: net.ipv6.conf.default.accept_redirects
    value: "{{ sysctl_net_ipv6_conf_default_accept_redirects_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv6_conf_default_accept_redirects
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-27166-8
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000099

NETWORKING_IPV6=no
IPV6INIT=no
$ sudo sysctl -w net.ipv4.conf.default.accept_source_route=0
net.ipv4.conf.default.accept_source_route = 0

sysctl_net_ipv4_conf_default_accept_source_route_value="(N/A)"

#
# Set runtime for net.ipv4.conf.default.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.accept_source_route=$sysctl_net_ipv4_conf_default_accept_source_route_value

#
# If net.ipv4.conf.default.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.accept_source_route = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.default.accept_source_route' "$sysctl_net_ipv4_conf_default_accept_source_route_value" 'CCE-26983-7'

- name: XCCDF Value sysctl_net_ipv4_conf_default_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_accept_source_route_value: (N/A)
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.accept_source_route is set
  sysctl:
    name: net.ipv4.conf.default.accept_source_route
    value: "{{ sysctl_net_ipv4_conf_default_accept_source_route_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_conf_default_accept_source_route
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-26983-7
    - NIST-800-53-AC-4
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - NIST-800-53-SC-7
    - DISA-STIG-RHEL-06-000089

$ sudo sysctl -w net.ipv4.icmp_echo_ignore_broadcasts=1
net.ipv4.icmp_echo_ignore_broadcasts = 1

sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value="(N/A)"

#
# Set runtime for net.ipv4.icmp_echo_ignore_broadcasts
#
/sbin/sysctl -q -n -w net.ipv4.icmp_echo_ignore_broadcasts=$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value

#
# If net.ipv4.icmp_echo_ignore_broadcasts present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_echo_ignore_broadcasts = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.icmp_echo_ignore_broadcasts' "$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value" 'CCE-26883-9'

- name: XCCDF Value sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value # promote to variable
  set_fact:
    sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value: (N/A)
  tags:
    - always

- name: Ensure sysctl net.ipv4.icmp_echo_ignore_broadcasts is set
  sysctl:
    name: net.ipv4.icmp_echo_ignore_broadcasts
    value: "{{ sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_icmp_echo_ignore_broadcasts
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-26883-9
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - DISA-STIG-RHEL-06-000092

$ sudo sysctl -w net.ipv4.conf.default.accept_redirects=0
net.ipv4.conf.default.accept_redirects = 0

sysctl_net_ipv4_conf_default_accept_redirects_value="(N/A)"

#
# Set runtime for net.ipv4.conf.default.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.accept_redirects=$sysctl_net_ipv4_conf_default_accept_redirects_value

#
# If net.ipv4.conf.default.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.accept_redirects = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.default.accept_redirects' "$sysctl_net_ipv4_conf_default_accept_redirects_value" 'CCE-27015-7'

- name: XCCDF Value sysctl_net_ipv4_conf_default_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_accept_redirects_value: (N/A)
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.accept_redirects is set
  sysctl:
    name: net.ipv4.conf.default.accept_redirects
    value: "{{ sysctl_net_ipv4_conf_default_accept_redirects_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_conf_default_accept_redirects
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-27015-7
    - NIST-800-53-AC-4
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - NIST-800-53-SC-7
    - DISA-STIG-RHEL-06-000091

$ sudo sysctl -w net.ipv4.conf.default.rp_filter=1
net.ipv4.conf.default.rp_filter = 1

sysctl_net_ipv4_conf_default_rp_filter_value="(N/A)"

#
# Set runtime for net.ipv4.conf.default.rp_filter
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.rp_filter=$sysctl_net_ipv4_conf_default_rp_filter_value

#
# If net.ipv4.conf.default.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.rp_filter = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.default.rp_filter' "$sysctl_net_ipv4_conf_default_rp_filter_value" 'CCE-26915-9'

- name: XCCDF Value sysctl_net_ipv4_conf_default_rp_filter_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_rp_filter_value: (N/A)
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.rp_filter is set
  sysctl:
    name: net.ipv4.conf.default.rp_filter
    value: "{{ sysctl_net_ipv4_conf_default_rp_filter_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_conf_default_rp_filter
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-26915-9
    - NIST-800-53-AC-4
    - NIST-800-53-SC-5
    - NIST-800-53-SC-7
    - DISA-STIG-RHEL-06-000097

$ sudo sysctl -w net.ipv4.conf.all.secure_redirects=0
net.ipv4.conf.all.secure_redirects = 0

sysctl_net_ipv4_conf_all_secure_redirects_value="(N/A)"

#
# Set runtime for net.ipv4.conf.all.secure_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.secure_redirects=$sysctl_net_ipv4_conf_all_secure_redirects_value

#
# If net.ipv4.conf.all.secure_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.secure_redirects = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.all.secure_redirects' "$sysctl_net_ipv4_conf_all_secure_redirects_value" 'CCE-26854-0'

- name: XCCDF Value sysctl_net_ipv4_conf_all_secure_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_secure_redirects_value: (N/A)
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.secure_redirects is set
  sysctl:
    name: net.ipv4.conf.all.secure_redirects
    value: "{{ sysctl_net_ipv4_conf_all_secure_redirects_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_conf_all_secure_redirects
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-26854-0
    - NIST-800-53-AC-4
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - DISA-STIG-RHEL-06-000086

$ sudo sysctl -w net.ipv4.conf.all.accept_source_route=0
net.ipv4.conf.all.accept_source_route = 0

sysctl_net_ipv4_conf_all_accept_source_route_value="(N/A)"

#
# Set runtime for net.ipv4.conf.all.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.accept_source_route=$sysctl_net_ipv4_conf_all_accept_source_route_value

#
# If net.ipv4.conf.all.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.accept_source_route = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.all.accept_source_route' "$sysctl_net_ipv4_conf_all_accept_source_route_value" 'CCE-27037-1'

- name: XCCDF Value sysctl_net_ipv4_conf_all_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_accept_source_route_value: (N/A)
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.accept_source_route is set
  sysctl:
    name: net.ipv4.conf.all.accept_source_route
    value: "{{ sysctl_net_ipv4_conf_all_accept_source_route_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_conf_all_accept_source_route
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-27037-1
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - DISA-STIG-RHEL-06-000083

$ sudo sysctl -w net.ipv4.tcp_syncookies=1
net.ipv4.tcp_syncookies = 1

sysctl_net_ipv4_tcp_syncookies_value="(N/A)"

#
# Set runtime for net.ipv4.tcp_syncookies
#
/sbin/sysctl -q -n -w net.ipv4.tcp_syncookies=$sysctl_net_ipv4_tcp_syncookies_value

#
# If net.ipv4.tcp_syncookies present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.tcp_syncookies = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.tcp_syncookies' "$sysctl_net_ipv4_tcp_syncookies_value" 'CCE-27053-8'

- name: XCCDF Value sysctl_net_ipv4_tcp_syncookies_value # promote to variable
  set_fact:
    sysctl_net_ipv4_tcp_syncookies_value: (N/A)
  tags:
    - always

- name: Ensure sysctl net.ipv4.tcp_syncookies is set
  sysctl:
    name: net.ipv4.tcp_syncookies
    value: "{{ sysctl_net_ipv4_tcp_syncookies_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_tcp_syncookies
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-27053-8
    - NIST-800-53-AC-4
    - NIST-800-53-SC-5(2)
    - NIST-800-53-SC-5(3)
    - DISA-STIG-RHEL-06-000095

$ sudo sysctl -w net.ipv4.conf.all.accept_redirects=0
net.ipv4.conf.all.accept_redirects = 0

sysctl_net_ipv4_conf_all_accept_redirects_value="(N/A)"

#
# Set runtime for net.ipv4.conf.all.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.accept_redirects=$sysctl_net_ipv4_conf_all_accept_redirects_value

#
# If net.ipv4.conf.all.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.accept_redirects = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.all.accept_redirects' "$sysctl_net_ipv4_conf_all_accept_redirects_value" 'CCE-27027-2'

- name: XCCDF Value sysctl_net_ipv4_conf_all_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_accept_redirects_value: (N/A)
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.accept_redirects is set
  sysctl:
    name: net.ipv4.conf.all.accept_redirects
    value: "{{ sysctl_net_ipv4_conf_all_accept_redirects_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_conf_all_accept_redirects
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-27027-2
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - DISA-STIG-RHEL-06-000084

$ sudo sysctl -w net.ipv4.conf.all.log_martians=1
net.ipv4.conf.all.log_martians = 1

sysctl_net_ipv4_conf_all_log_martians_value="(N/A)"

#
# Set runtime for net.ipv4.conf.all.log_martians
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.log_martians=$sysctl_net_ipv4_conf_all_log_martians_value

#
# If net.ipv4.conf.all.log_martians present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.log_martians = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.all.log_martians' "$sysctl_net_ipv4_conf_all_log_martians_value" 'CCE-27066-0'

- name: XCCDF Value sysctl_net_ipv4_conf_all_log_martians_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_log_martians_value: (N/A)
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.log_martians is set
  sysctl:
    name: net.ipv4.conf.all.log_martians
    value: "{{ sysctl_net_ipv4_conf_all_log_martians_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_conf_all_log_martians
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-27066-0
    - NIST-800-53-AC-3(10)
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5(3)
    - DISA-STIG-RHEL-06-000088

$ sudo sysctl -w net.ipv4.conf.all.rp_filter=1
net.ipv4.conf.all.rp_filter = 1

sysctl_net_ipv4_conf_all_rp_filter_value="(N/A)"

#
# Set runtime for net.ipv4.conf.all.rp_filter
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.rp_filter=$sysctl_net_ipv4_conf_all_rp_filter_value

#
# If net.ipv4.conf.all.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.rp_filter = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.all.rp_filter' "$sysctl_net_ipv4_conf_all_rp_filter_value" 'CCE-26979-5'

- name: XCCDF Value sysctl_net_ipv4_conf_all_rp_filter_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_rp_filter_value: (N/A)
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.rp_filter is set
  sysctl:
    name: net.ipv4.conf.all.rp_filter
    value: "{{ sysctl_net_ipv4_conf_all_rp_filter_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_conf_all_rp_filter
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-26979-5
    - NIST-800-53-AC-4
    - NIST-800-53-SC-5
    - NIST-800-53-SC-7
    - DISA-STIG-RHEL-06-000096

$ sudo sysctl -w net.ipv4.icmp_ignore_bogus_error_responses=1
net.ipv4.icmp_ignore_bogus_error_responses = 1

sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value="(N/A)"

#
# Set runtime for net.ipv4.icmp_ignore_bogus_error_responses
#
/sbin/sysctl -q -n -w net.ipv4.icmp_ignore_bogus_error_responses=$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value

#
# If net.ipv4.icmp_ignore_bogus_error_responses present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_ignore_bogus_error_responses = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.icmp_ignore_bogus_error_responses' "$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value" 'CCE-26993-6'

- name: XCCDF Value sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value # promote to variable
  set_fact:
    sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value: (N/A)
  tags:
    - always

- name: Ensure sysctl net.ipv4.icmp_ignore_bogus_error_responses is set
  sysctl:
    name: net.ipv4.icmp_ignore_bogus_error_responses
    value: "{{ sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-26993-6
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - DISA-STIG-RHEL-06-000093

$ sudo sysctl -w net.ipv4.conf.default.secure_redirects=0
net.ipv4.conf.default.secure_redirects = 0

sysctl_net_ipv4_conf_default_secure_redirects_value="(N/A)"

#
# Set runtime for net.ipv4.conf.default.secure_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.secure_redirects=$sysctl_net_ipv4_conf_default_secure_redirects_value

#
# If net.ipv4.conf.default.secure_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.secure_redirects = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.default.secure_redirects' "$sysctl_net_ipv4_conf_default_secure_redirects_value" 'CCE-26831-8'

- name: XCCDF Value sysctl_net_ipv4_conf_default_secure_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_secure_redirects_value: (N/A)
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.secure_redirects is set
  sysctl:
    name: net.ipv4.conf.default.secure_redirects
    value: "{{ sysctl_net_ipv4_conf_default_secure_redirects_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_conf_default_secure_redirects
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-26831-8
    - NIST-800-53-AC-4
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - NIST-800-53-SC-7
    - DISA-STIG-RHEL-06-000090

$ sudo sysctl -w net.ipv4.ip_forward=0
net.ipv4.ip_forward = 0

#
# Set runtime for net.ipv4.ip_forward
#
/sbin/sysctl -q -n -w net.ipv4.ip_forward=0

#
# If net.ipv4.ip_forward present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.ip_forward = 0" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.ip_forward' "0" 'CCE-26866-4'

- name: Ensure sysctl net.ipv4.ip_forward is set to 0
  sysctl:
    name: net.ipv4.ip_forward
    value: 0
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_ip_forward
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-26866-4
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - DISA-STIG-RHEL-06-000082

$ sudo sysctl -w net.ipv4.conf.all.send_redirects=0
net.ipv4.conf.all.send_redirects = 0

#
# Set runtime for net.ipv4.conf.all.send_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.send_redirects=0

#
# If net.ipv4.conf.all.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.all.send_redirects = 0" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.all.send_redirects' "0" 'CCE-27004-1'

- name: Ensure sysctl net.ipv4.conf.all.send_redirects is set to 0
  sysctl:
    name: net.ipv4.conf.all.send_redirects
    value: 0
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_conf_all_send_redirects
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-27004-1
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5(1)
    - DISA-STIG-RHEL-06-000081

$ sudo sysctl -w net.ipv4.conf.default.send_redirects=0
net.ipv4.conf.default.send_redirects = 0

#
# Set runtime for net.ipv4.conf.default.send_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.send_redirects=0

#
# If net.ipv4.conf.default.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.default.send_redirects = 0" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.default.send_redirects' "0" 'CCE-27001-7'

- name: Ensure sysctl net.ipv4.conf.default.send_redirects is set to 0
  sysctl:
    name: net.ipv4.conf.default.send_redirects
    value: 0
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_conf_default_send_redirects
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-27001-7
    - NIST-800-53-AC-4
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - NIST-800-53-SC-7
    - DISA-STIG-RHEL-06-000080

install dccp /bin/true
if grep --silent "^install dccp" /etc/modprobe.d/dccp.conf ; then
	sed -i 's/^install dccp.*/install dccp /bin/true/g' /etc/modprobe.d/dccp.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/dccp.conf
	echo "install dccp /bin/true" >> /etc/modprobe.d/dccp.conf
fi

- name: Ensure kernel module 'dccp' is disabled
  lineinfile:
    create=yes
    dest="/etc/modprobe.d/{{item}}.conf"
    regexp="{{item}}"
    line="install {{item}} /bin/true"
  with_items:
    - dccp
  tags:
    - kernel_module_dccp_disabled
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-26448-1
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000124

install rds /bin/true
if grep --silent "^install rds" /etc/modprobe.d/rds.conf ; then
	sed -i 's/^install rds.*/install rds /bin/true/g' /etc/modprobe.d/rds.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/rds.conf
	echo "install rds /bin/true" >> /etc/modprobe.d/rds.conf
fi

- name: Ensure kernel module 'rds' is disabled
  lineinfile:
    create=yes
    dest="/etc/modprobe.d/{{item}}.conf"
    regexp="{{item}}"
    line="install {{item}} /bin/true"
  with_items:
    - rds
  tags:
    - kernel_module_rds_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-26239-4
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000126

install sctp /bin/true
if grep --silent "^install sctp" /etc/modprobe.d/sctp.conf ; then
	sed -i 's/^install sctp.*/install sctp /bin/true/g' /etc/modprobe.d/sctp.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/sctp.conf
	echo "install sctp /bin/true" >> /etc/modprobe.d/sctp.conf
fi

- name: Ensure kernel module 'sctp' is disabled
  lineinfile:
    create=yes
    dest="/etc/modprobe.d/{{item}}.conf"
    regexp="{{item}}"
    line="install {{item}} /bin/true"
  with_items:
    - sctp
  tags:
    - kernel_module_sctp_disabled
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-26410-1
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000125

install tipc /bin/true
if grep --silent "^install tipc" /etc/modprobe.d/tipc.conf ; then
	sed -i 's/^install tipc.*/install tipc /bin/true/g' /etc/modprobe.d/tipc.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/tipc.conf
	echo "install tipc /bin/true" >> /etc/modprobe.d/tipc.conf
fi

- name: Ensure kernel module 'tipc' is disabled
  lineinfile:
    create=yes
    dest="/etc/modprobe.d/{{item}}.conf"
    regexp="{{item}}"
    line="install {{item}} /bin/true"
  with_items:
    - tipc
  tags:
    - kernel_module_tipc_disabled
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-26696-5
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000127

$ ifconfig -a
$ iwconfig
$ sudo ifdown interface
$ sudo rm /etc/sysconfig/network-scripts/ifcfg-interface
$ sudo yum erase mcstrans
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove mcstrans

- name: Ensure mcstrans is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - mcstrans
  tags:
    - package_mcstrans_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27404-3

include remove_mcstrans

class remove_mcstrans {
  package { 'mcstrans':
    ensure => 'purged',
  }
}

package --remove=mcstrans

SELINUXTYPE=targeted

var_selinux_policy_name="targeted"
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysconfig/selinux' '^SELINUXTYPE=' $var_selinux_policy_name 'CCE-26875-5' '%s=%s'

- name: XCCDF Value var_selinux_policy_name # promote to variable
  set_fact:
    var_selinux_policy_name: targeted
  tags:
    - always

- name: "Configure SELinux Policy"
  lineinfile:
    path: /etc/sysconfig/selinux
    regexp: '^SELINUXTYPE='
    line: "SELINUXTYPE={{ var_selinux_policy_name }}"
    create: yes
  tags:
    - selinux_policytype
    - unknown_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-26875-5
    - NIST-800-53-AC-3
    - NIST-800-53-AC-3(3)
    - NIST-800-53-AC-4
    - NIST-800-53-AC-6
    - NIST-800-53-AU-9
    - DISA-STIG-RHEL-06-000023

$ sudo yum erase setroubleshoot
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove setroubleshoot

- name: Ensure setroubleshoot is removed
  package:
    name="{{item}}"
    state=absent
  with_items:
    - setroubleshoot
  tags:
    - package_setroubleshoot_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - CCE-27421-7

include remove_setroubleshoot

class remove_setroubleshoot {
  package { 'setroubleshoot':
    ensure => 'purged',
  }
}

package --remove=setroubleshoot

sed -i --follow-symlinks "s/selinux=0//gI" /etc/grub.conf
sed -i --follow-symlinks "s/enforcing=0//gI" /etc/grub.conf

- name: Ensure SELinux Not Disabled in /etc/default/grub
  replace:
    dest: /etc/default/grub
    regexp: selinux=0
  tags:
    - enable_selinux_bootloader
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-26956-3
    - NIST-800-53-AC-3
    - NIST-800-53-AC-3(3)
    - NIST-800-53-AC-6
    - NIST-800-53-AU-9
    - DISA-STIG-RHEL-06-000017

$ sudo ps -eZ | egrep "initrc" | egrep -vw "tr|ps|egrep|bash|awk" | tr ':' ' ' | awk '{ print $NF }'
SELINUX=enforcing

var_selinux_state="enforcing"
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state 'CCE-26969-6' '%s=%s'

fixfiles onboot
fixfiles -f relabel

- name: XCCDF Value var_selinux_state # promote to variable
  set_fact:
    var_selinux_state: enforcing
  tags:
    - always

- name: "Ensure SELinux State is Enforcing"
  lineinfile:
    path: /etc/sysconfig/selinux
    regexp: '^SELINUX='
    line: "SELINUX={{ var_selinux_state }}"
    create: yes
  tags:
    - selinux_state
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-26969-6
    - NIST-800-53-AC-3
    - NIST-800-53-AC-3(3)
    - NIST-800-53-AC-4
    - NIST-800-53-AC-6
    - NIST-800-53-AU-9
    - DISA-STIG-RHEL-06-000020

awk -F: '$3 == 0 && $1 != "root" { print $1 }' /etc/passwd | xargs passwd -l

~/.profile
~/.bashrc
$ sudo echo > /etc/securetty

echo > /etc/securetty

- name: "Direct root Logins Not Allowed"
  shell: echo > /etc/securetty
  tags:
    - no_direct_root_logins
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-26891-2
    - NIST-800-53-IA-2(1)

$ sudo usermod -s /sbin/nologin SYSACCT
sed --follow-symlinks -i 's/\<nullok\>//g' /etc/pam.d/system-auth
sed --follow-symlinks -i 's/\<nullok\>//g' /etc/pam.d/password-auth

- name: "Prevent Log In to Accounts With Empty Password - system-auth"
  replace:
    dest: /etc/pam.d/system-auth
    follow: yes
    regexp: 'nullok'
  tags:
    - no_empty_passwords
    - high_severity
    - configure_strategy
    - low_complexity
    - medium_disruption
    - CCE-27038-9
    - NIST-800-53-IA-5(b)
    - NIST-800-53-IA-5(c)
    - NIST-800-53-IA-5(1)(a)
    - PCI-DSS-Req-8.2.3
    - DISA-STIG-RHEL-06-000030

- name: "Prevent Log In to Accounts With Empty Password - password-auth"
  replace:
    dest: /etc/pam.d/password-auth
    follow: yes
    regexp: 'nullok'
  tags:
    - no_empty_passwords
    - high_severity
    - configure_strategy
    - low_complexity
    - medium_disruption
    - CCE-27038-9
    - NIST-800-53-IA-5(b)
    - NIST-800-53-IA-5(c)
    - NIST-800-53-IA-5(1)(a)
    - PCI-DSS-Req-8.2.3
    - DISA-STIG-RHEL-06-000030

$ sudo chage -M 180 -m 7 -W 7 USER
PASS_MIN_DAYS (N/A)

var_accounts_minimum_age_login_defs="(N/A)"

grep -q ^PASS_MIN_DAYS /etc/login.defs && \
  sed -i "s/PASS_MIN_DAYS.*/PASS_MIN_DAYS     $var_accounts_minimum_age_login_defs/g" /etc/login.defs
if ! [ $? -eq 0 ]; then
    echo "PASS_MIN_DAYS      $var_accounts_minimum_age_login_defs" >> /etc/login.defs
fi

- name: XCCDF Value var_accounts_minimum_age_login_defs # promote to variable
  set_fact:
    var_accounts_minimum_age_login_defs: (N/A)
  tags:
    - always

- name: Set Password Minimum Age
  lineinfile:
      create: yes
      dest: /etc/login.defs
      regexp: ^#?PASS_MIN_DAYS
      line: "PASS_MIN_DAYS {{ var_accounts_minimum_age_login_defs }}"
  tags:
    - accounts_minimum_age_login_defs
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-27013-2
    - NIST-800-53-IA-5(f)
    - NIST-800-53-IA-5(1)(d)
    - DISA-STIG-RHEL-06-000051

PASS_MAX_DAYS 90

var_accounts_maximum_age_login_defs="90"

grep -q ^PASS_MAX_DAYS /etc/login.defs && \
  sed -i "s/PASS_MAX_DAYS.*/PASS_MAX_DAYS     $var_accounts_maximum_age_login_defs/g" /etc/login.defs
if ! [ $? -eq 0 ]; then
    echo "PASS_MAX_DAYS      $var_accounts_maximum_age_login_defs" >> /etc/login.defs
fi

- name: XCCDF Value var_accounts_maximum_age_login_defs # promote to variable
  set_fact:
    var_accounts_maximum_age_login_defs: 90
  tags:
    - always

- name: Set Password Maximum Age
  lineinfile:
    create: yes
    dest: /etc/login.defs
    regexp: ^#?PASS_MAX_DAYS
    line: "PASS_MAX_DAYS {{ var_accounts_maximum_age_login_defs }}"
  tags:
    - accounts_maximum_age_login_defs
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-26985-2
    - NIST-800-53-IA-5(f)
    - NIST-800-53-IA-5(g)
    - NIST-800-53-IA-5(1)(d)
    - PCI-DSS-Req-8.2.4
    - DISA-STIG-RHEL-06-000053

PASS_WARN_AGE (N/A)

var_accounts_password_warn_age_login_defs="(N/A)"

grep -q ^PASS_WARN_AGE /etc/login.defs && \
  sed -i "s/PASS_WARN_AGE.*/PASS_WARN_AGE     $var_accounts_password_warn_age_login_defs/g" /etc/login.defs
if ! [ $? -eq 0 ]; then
    echo "PASS_WARN_AGE      $var_accounts_password_warn_age_login_defs" >> /etc/login.defs
fi

- name: XCCDF Value var_accounts_password_warn_age_login_defs # promote to variable
  set_fact:
    var_accounts_password_warn_age_login_defs: (N/A)
  tags:
    - always

- name: "Set Password Warning Age"
  lineinfile:
    dest: /etc/login.defs
    regexp: "^PASS_WARN_AGE *[0-9]*"
    state: present
    line: "PASS_WARN_AGE        {{ var_accounts_password_warn_age_login_defs }}"
  tags:
    - accounts_password_warn_age_login_defs
    - unknown_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-26988-6
    - NIST-800-53-AC-2(2)
    - NIST-800-53-IA-5(f)
    - DISA-STIG-RHEL-06-000054

$ sudo chage -I NUM_DAYS USER
INACTIVE=(N/A)

var_account_disable_post_pw_expiration="(N/A)"

grep -q ^INACTIVE /etc/default/useradd && \
  sed -i "s/INACTIVE.*/INACTIVE=$var_account_disable_post_pw_expiration/g" /etc/default/useradd
if ! [ $? -eq 0 ]; then
    echo "INACTIVE=$var_account_disable_post_pw_expiration" >> /etc/default/useradd
fi

- name: XCCDF Value var_account_disable_post_pw_expiration # promote to variable
  set_fact:
    var_account_disable_post_pw_expiration: (N/A)
  tags:
    - always

- name: Set Account Expiration Following Inactivity
  lineinfile:
    create: yes
    dest: /etc/default/useradd
    regexp: ^INACTIVE
    line: "INACTIVE={{ var_account_disable_post_pw_expiration }}"
  tags:
    - account_disable_post_pw_expiration
    - unknown_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-27283-1
    - NIST-800-53-AC-2(2)
    - NIST-800-53-AC-2(3)
    - PCI-DSS-Req-8.1.4
    - DISA-STIG-RHEL-06-000334

$ sudo chgrp root /etc/grub.conf 
chgrp root /etc/grub.conf

$ sudo chown root /etc/grub.conf 
chown root /etc/grub.conf

$ grub-crypt --sha-512
password --encrypted password-hash
$ sudo chmod 600 /boot/grub/grub.conf
chmod 600 /boot/grub/grub.conf

PROMPT=no

# Ensure value of PROMPT key in /etc/sysconfig/init is set to 'no'
grep -q ^PROMPT /etc/sysconfig/init && \
  sed -i "s/PROMPT.*/PROMPT=no/g" /etc/sysconfig/init
if ! [ $? -eq 0 ]; then
    echo "PROMPT=no" >> /etc/sysconfig/init
fi

# Ensure 'confirm' kernel boot argument is not present in some of
# kernel lines in /etc/grub.conf
sed -i --follow-symlinks "s/confirm//gI" /etc/grub.conf

SINGLE=/sbin/sulogin
grep -q ^SINGLE /etc/sysconfig/init && \
  sed -i "s/SINGLE.*/SINGLE=\/sbin\/sulogin/g" /etc/sysconfig/init
if ! [ $? -eq 0 ]; then
    echo "SINGLE=/sbin/sulogin" >> /etc/sysconfig/init
fi

password sufficient pam_unix.so existing_options remember=(N/A)
password requisite pam_pwhistory.so existing_options remember=(N/A)

var_password_pam_unix_remember="(N/A)"

AUTH_FILES[0]="/etc/pam.d/system-auth"
AUTH_FILES[1]="/etc/pam.d/password-auth"

for pamFile in "${AUTH_FILES[@]}"
do
	if grep -q "remember=" $pamFile; then
		sed -i --follow-symlinks "s/\(^password.*sufficient.*pam_unix.so.*\)\(\(remember *= *\)[^ $]*\)/\1remember=$var_password_pam_unix_remember/" $pamFile
	else
		sed -i --follow-symlinks "/^password[[:space:]]\+sufficient[[:space:]]\+pam_unix.so/ s/$/ remember=$var_password_pam_unix_remember/" $pamFile
	fi
done

- name: XCCDF Value var_password_pam_unix_remember # promote to variable
  set_fact:
    var_password_pam_unix_remember: (N/A)
  tags:
    - always

- name: "Do not allow users to reuse recent passwords - system-auth (change)"
  replace:
    dest: /etc/pam.d/system-auth
    follow: yes
    regexp: '^(password\s+sufficient\s+pam_unix\.so\s.*remember\s*=\s*)(\S+)(.*)$'
    replace: '\g<1>{{ var_password_pam_unix_remember }}\g<3>'
  tags:
    - accounts_password_pam_unix_remember
    - medium_severity
    - configure_strategy
    - low_complexity
    - medium_disruption
    - CCE-26741-9
    - NIST-800-53-IA-5(f)
    - NIST-800-53-IA-5(1)(e)
    - PCI-DSS-Req-8.2.5
    - DISA-STIG-RHEL-06-000274

- name: "Do not allow users to reuse recent passwords - system-auth (add)"
  replace:
    dest: /etc/pam.d/system-auth
    follow: yes
    regexp: '^password\s+sufficient\s+pam_unix\.so\s(?!.*remember\s*=\s*).*$'
    replace: '\g<0> remember={{ var_password_pam_unix_remember }}'
  tags:
    - accounts_password_pam_unix_remember
    - medium_severity
    - configure_strategy
    - low_complexity
    - medium_disruption
    - CCE-26741-9
    - NIST-800-53-IA-5(f)
    - NIST-800-53-IA-5(1)(e)
    - PCI-DSS-Req-8.2.5
    - DISA-STIG-RHEL-06-000274

auth required pam_faillock.so preauth silent deny=(N/A) unlock_time=(N/A) fail_interval=(N/A)
auth [default=die] pam_faillock.so authfail deny=(N/A) unlock_time=(N/A) fail_interval=(N/A)
account required pam_faillock.so

var_accounts_passwords_pam_faillock_deny="(N/A)"

AUTH_FILES[0]="/etc/pam.d/system-auth"
AUTH_FILES[1]="/etc/pam.d/password-auth"

# This script fixes absence of pam_faillock.so in PAM stack or the
# absense of deny=[0-9]+ in pam_faillock.so arguments
# When inserting auth pam_faillock.so entries,
# the entry with preauth argument will be added before pam_unix.so module
# and entry with authfail argument will be added before pam_deny.so module.

# The placement of pam_faillock.so entries will not be changed
# if they are already present

# Invoke the function without args, so its body is substituded right here.
function set_faillock_option_to_value_in_pam_file {
	# If invoked with no arguments, exit. This is an intentional behavior.
	[ $# -gt 1 ] || return 0
	[ $# -ge 3 ] || die "$0 requires exactly zero, three, or four arguments"
	[ $# -le 4 ] || die "$0 requires exactly zero, three, or four arguments"
	local _pamFile="$1" _option="$2" _value="$3" _insert_lines_callback="$4"
	# pam_faillock.so already present?
	if grep -q "^auth.*pam_faillock.so.*" "$_pamFile"; then

		# pam_faillock.so present, is the option present?
		if grep -q "^auth.*[default=die].*pam_faillock.so.*authfail.*$_option=" "$_pamFile"; then

			# both pam_faillock.so & option present, just correct option to the right value
			sed -i --follow-symlinks "s/\(^auth.*required.*pam_faillock.so.*preauth.*silent.*\)\($_option *= *\).*/\1\2$_value/" "$_pamFile"
			sed -i --follow-symlinks "s/\(^auth.*[default=die].*pam_faillock.so.*authfail.*\)\($_option *= *\).*/\1\2$_value/" "$_pamFile"

		# pam_faillock.so present, but the option not yet
		else

			# append correct option value to appropriate places
			sed -i --follow-symlinks "/^auth.*required.*pam_faillock.so.*preauth.*silent.*/ s/$/ $_option=$_value/" "$_pamFile"
			sed -i --follow-symlinks "/^auth.*[default=die].*pam_faillock.so.*authfail.*/ s/$/ $_option=$_value/" "$_pamFile"
		fi

	# pam_faillock.so not present yet
	else
		test -z "$_insert_lines_callback" || "$_insert_lines_callback" "$_option" "$_value" "$_pamFile"
		# insert pam_faillock.so preauth & authfail rows with proper value of the option in question
	fi
}

set_faillock_option_to_value_in_pam_file

function insert_lines_if_pam_faillock_so_not_present {
	# insert pam_faillock.so preauth row with proper value of the 'deny' option before pam_unix.so
	sed -i --follow-symlinks "/^auth.*pam_unix.so.*/i auth        required      pam_faillock.so preauth silent $_option=$_value" $_pamFile
	# insert pam_faillock.so authfail row with proper value of the 'deny' option before pam_deny.so, after all modules which determine authentication outcome.
	sed -i --follow-symlinks "/^auth.*pam_deny.so.*/i auth        [default=die] pam_faillock.so authfail $_option=$_value" $_pamFile
}

for pamFile in "${AUTH_FILES[@]}"
do
	# 'true &&' has to be there due to build system limitation
	true && set_faillock_option_to_value_in_pam_file "$pamFile" deny "$var_accounts_passwords_pam_faillock_deny" insert_lines_if_pam_faillock_so_not_present

	# add pam_faillock.so into account phase
	if ! grep -q "^account.*required.*pam_faillock.so" $pamFile; then
		sed -i --follow-symlinks "/^account.*required.*pam_unix.so/i account     required      pam_faillock.so" $pamFile
	fi
done

- name: XCCDF Value var_accounts_passwords_pam_faillock_deny # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_deny: (N/A)
  tags:
    - always
- name: XCCDF Value var_accounts_passwords_pam_faillock_unlock_time # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_unlock_time: (N/A)
  tags:
    - always
- name: XCCDF Value var_accounts_passwords_pam_faillock_fail_interval # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_fail_interval: (N/A)
  tags:
    - always

- name: set auth pam_faillock before pam_unix.so
  pamd:
    name: system-auth
    type: auth
    control: sufficient
    module_path: pam_unix.so
    new_type: auth
    new_control: required
    new_module_path: pam_faillock.so
    module_arguments: 'preauth
        silent
        deny={{ var_accounts_passwords_pam_faillock_deny }}
        unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time }}
        fail_interval={{ var_accounts_passwords_pam_faillock_fail_interval }}'
    state: before
  tags:
    - accounts_passwords_pam_faillock_deny
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-26844-1
    - NIST-800-53-AC-7(a)
    - PCI-DSS-Req-8.1.6
    - DISA-STIG-RHEL-06-000061

- name: set auth pam_faillock after pam_unix.so
  pamd:
    name: system-auth
    type: auth
    control: sufficient
    module_path: pam_unix.so
    new_type: auth
    new_control: '[default=die]'
    new_module_path: pam_faillock.so
    module_arguments: 'preauth
        silent
        deny={{ var_accounts_passwords_pam_faillock_deny }}
        unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time }}
        fail_interval={{ var_accounts_passwords_pam_faillock_fail_interval }}'
    state: after
  tags:
    - accounts_passwords_pam_faillock_deny
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-26844-1
    - NIST-800-53-AC-7(a)
    - PCI-DSS-Req-8.1.6
    - DISA-STIG-RHEL-06-000061

- name: set account pam_faillock before pam_unix.so
  pamd:
    name: system-auth
    type: account
    control: required
    module_path: pam_unix.so
    new_type: account
    new_control: required
    new_module_path: pam_faillock.so
    state: before
  tags:
    - accounts_passwords_pam_faillock_deny
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-26844-1
    - NIST-800-53-AC-7(a)
    - PCI-DSS-Req-8.1.6
    - DISA-STIG-RHEL-06-000061

$ sudo gconftool-2 --direct \
  --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory \
  --type bool \
  --set /apps/gdm/simple-greeter/banner_message_enable true
# Install GConf2 package if not installed
if ! rpm -q GConf2; then
  yum -y install GConf2
fi

# Enable displaying of a login warning banner in the GNOME Display Manager's
# login screen
gconftool-2 --direct \
            --config-source "xml:readwrite:/etc/gconf/gconf.xml.mandatory" \
            --type bool \
            --set /apps/gdm/simple-greeter/banner_message_enable true

$ sudo gconftool-2 --direct \
  --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory \
  --type string \
  --set /apps/gdm/simple-greeter/banner_message_text \
  "Text of the warning banner here"

login_banner_text="(N/A)"

# Install GConf2 package if not installed
if ! rpm -q GConf2; then
  yum -y install GConf2
fi

# Expand the login_banner_text value - there was a regular-expression
# matching various banners, needs to be expanded
banner_expanded=$(echo "$login_banner_text" | sed 's/\[\\s\\n\][*+]/ /g;s/\\//g;')

# Set the text shown by the GNOME Display Manager in the login screen
gconftool-2 --direct \
            --config-source "xml:readwrite:/etc/gconf/gconf.xml.mandatory" \
            --type string \
            --set /apps/gdm/simple-greeter/banner_message_text "${banner_expanded}"

login_banner_text="(N/A)"

# There was a regular-expression matching various banners, needs to be expanded
expanded=$(echo "$login_banner_text" | sed 's/\[\\s\\n\][+*]/ /g;s/\\//g;s/[^-]- /\n\n-/g')
formatted=$(echo "$expanded" | fold -sw 80)

cat <<EOF >/etc/issue
$formatted
EOF

printf "\n" >> /etc/issue

umask 027

var_accounts_user_umask="027"

grep -q umask /etc/bashrc && \
  sed -i "s/umask.*/umask $var_accounts_user_umask/g" /etc/bashrc
if ! [ $? -eq 0 ]; then
    echo "umask $var_accounts_user_umask" >> /etc/bashrc
fi

umask 027
$ sudo ls -ld /home/USER
$ sudo chmod g-w /home/USER
$ sudo chmod o-rwx /home/USER
type=AVC msg=audit(1226874073.147:96): avc:  denied  { getattr } for pid=2465 comm="httpd"
path="/var/www/html/file1" dev=dm-0 ino=284133 scontext=unconfined_u:system_r:httpd_t:s0 
tcontext=unconfined_u:object_r:samba_share_t:s0 tclass=file

type=SYSCALL msg=audit(1226874073.147:96): arch=40000003 syscall=196 success=no exit=-13 
a0=b98df198 a1=bfec85dc a2=54dff4 a3=2008171 items=0 ppid=2463 pid=2465 auid=502 uid=48
gid=48 euid=48 suid=48 fsuid=48 egid=48 sgid=48 fsgid=48 tty=(none) ses=6 comm="httpd"
exe="/usr/sbin/httpd" subj=unconfined_u:system_r:httpd_t:s0 key=(null)

action_mail_acct = (N/A)

var_auditd_action_mail_acct="(N/A)"

AUDITCONFIG=/etc/audit/auditd.conf

grep -q ^action_mail_acct $AUDITCONFIG && \
  sed -i 's/^action_mail_acct.*/action_mail_acct = '"$var_auditd_action_mail_acct"'/g' $AUDITCONFIG
if ! [ $? -eq 0 ]; then
  echo "action_mail_acct = $var_auditd_action_mail_acct" >> $AUDITCONFIG
fi

- name: XCCDF Value var_auditd_action_mail_acct # promote to variable
  set_fact:
    var_auditd_action_mail_acct: (N/A)
  tags:
    - always

- name: Configure auditd mail_acct Action on Low Disk Space
  lineinfile:
    dest: /etc/audit/auditd.conf
    line: "action_mail_acct = {{ var_auditd_action_mail_acct }}"
    state: present
  #notify: reload auditd
  tags:
    - auditd_data_retention_action_mail_acct
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-27241-9
    - NIST-800-53-AU-1(b)
    - NIST-800-53-AU-4
    - NIST-800-53-AU-5(a)
    - NIST-800-53-IR-5
    - PCI-DSS-Req-10.7.a
    - DISA-STIG-RHEL-06-000313

max_log_file = STOREMB

var_auditd_max_log_file="(N/A)"

AUDITCONFIG=/etc/audit/auditd.conf

grep -q ^max_log_file $AUDITCONFIG && \
  sed -i 's/^max_log_file.*/max_log_file = '"$var_auditd_max_log_file"'/g' $AUDITCONFIG
if ! [ $? -eq 0 ]; then
  echo "max_log_file = $var_auditd_max_log_file" >> $AUDITCONFIG
fi

- name: XCCDF Value var_auditd_max_log_file # promote to variable
  set_fact:
    var_auditd_max_log_file: (N/A)
  tags:
    - always

- name: Configure auditd Max Log File Size
  lineinfile:
    dest: /etc/audit/auditd.conf
    line: "max_log_file {{ var_auditd_max_log_file }}"
    state: present
  #notify: reload auditd
  tags:
    - auditd_data_retention_max_log_file
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-27550-3
    - NIST-800-53-AU-1(b)
    - NIST-800-53-AU-11
    - NIST-800-53-IR-5
    - PCI-DSS-Req-10.7
    - DISA-STIG-RHEL-06-000160

space_left_action = ACTION

var_auditd_space_left_action="(N/A)"

#
# If space_left_action present in /etc/audit/auditd.conf, change value
# to var_auditd_space_left_action, else
# add "space_left_action = $var_auditd_space_left_action" to /etc/audit/auditd.conf
#

if grep --silent ^space_left_action /etc/audit/auditd.conf ; then
        sed -i 's/^space_left_action.*/space_left_action = '"$var_auditd_space_left_action"'/g' /etc/audit/auditd.conf
else
        echo -e "\n# Set space_left_action to $var_auditd_space_left_action per security requirements" >> /etc/audit/auditd.conf
        echo "space_left_action = $var_auditd_space_left_action" >> /etc/audit/auditd.conf
fi

- name: XCCDF Value var_auditd_space_left_action # promote to variable
  set_fact:
    var_auditd_space_left_action: (N/A)
  tags:
    - always

- name: Configure auditd space_left Action on Low Disk Space
  lineinfile:
    dest: /etc/audit/auditd.conf
    line: "space_left_action = {{ var_auditd_space_left_action }}"
    regexp: ^space_left_action*
  #notify: reload auditd
  tags:
    - auditd_data_retention_space_left_action
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-27238-5
    - NIST-800-53-AU-1(b)
    - NIST-800-53-AU-4
    - NIST-800-53-AU-5(b)
    - NIST-800-53-IR-5
    - PCI-DSS-Req-10.7
    - DISA-STIG-RHEL-06-000005

admin_space_left_action = ACTION

var_auditd_admin_space_left_action="(N/A)"

grep -q ^admin_space_left_action /etc/audit/auditd.conf && \
  sed -i "s/admin_space_left_action.*/admin_space_left_action = $var_auditd_admin_space_left_action/g" /etc/audit/auditd.conf
if ! [ $? -eq 0 ]; then
    echo "admin_space_left_action = $var_auditd_admin_space_left_action" >> /etc/audit/auditd.conf
fi

- name: XCCDF Value var_auditd_admin_space_left_action # promote to variable
  set_fact:
    var_auditd_admin_space_left_action: (N/A)
  tags:
    - always

- name: Configure auditd admin_space_left Action on Low Disk Space
  lineinfile:
    dest: /etc/audit/auditd.conf
    line: "admin_space_left_action = {{ var_auditd_admin_space_left_action }}"
    regexp: "^admin_space_left_action*"
  #notify: reload auditd
  tags:
    - auditd_data_retention_admin_space_left_action
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-27239-3
    - NIST-800-53-AU-1(b)
    - NIST-800-53-AU-4
    - NIST-800-53-AU-5(b)
    - NIST-800-53-IR-5
    - PCI-DSS-Req-10.7
    - DISA-STIG-RHEL-06-000163

max_log_file_action = ACTION

var_auditd_max_log_file_action="(N/A)"

AUDITCONFIG=/etc/audit/auditd.conf

grep -q ^max_log_file_action $AUDITCONFIG && \
  sed -i 's/^max_log_file_action.*/max_log_file_action = '"$var_auditd_max_log_file_action"'/g' $AUDITCONFIG
if ! [ $? -eq 0 ]; then
  echo "max_log_file_action = $var_auditd_max_log_file_action" >> $AUDITCONFIG
fi

- name: XCCDF Value var_auditd_max_log_file_action # promote to variable
  set_fact:
    var_auditd_max_log_file_action: (N/A)
  tags:
    - always

- name: Configure auditd max_log_file_action Upon Reaching Maximum Log Size
  lineinfile:
    dest: /etc/audit/auditd.conf
    line: "max_log_file_action {{ var_auditd_max_log_file_action }}"
    state: present
  #notify: reload auditd
  tags:
    - auditd_data_retention_max_log_file_action
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-27237-7
    - NIST-800-53-AU-1(b)
    - NIST-800-53-AU-4
    - NIST-800-53-AU-11
    - NIST-800-53-IR-5
    - PCI-DSS-Req-10.7
    - DISA-STIG-RHEL-06-000161

$ sudo service auditd restart
-w /etc/localtime -p wa -k audit_time_rules

# Perform the remediation
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	# Case when particular audit rule is already defined in some of /etc/audit/rules.d/*.rules file
	# Get pair -- filepath : matching_row into @matches array
	IFS=$'\n' matches=($(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules))
	# Reset IFS back to default
	unset IFS
	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect=("${files_to_inspect[@]}" "$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}

fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"

# audit_time_rules
-a always,exit -F arch=b32 -S stime -k audit_time_rules
-a always,exit -F arch=b64 -S adjtimex -S settimeofday -k audit_time_rules
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	# Check if particular audit rule is already defined
	IFS=$'\n' matches=($(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules))
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	# Reset IFS back to default
	unset IFS
	for match in "${matches[@]}"
	do
		files_to_inspect=("${files_to_inspect[@]}" "${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do

	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	IFS=$'\n' existing_rules=($(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file"))
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	# Reset IFS back to default
	unset IFS

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo $rule | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS=$'-S' read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				unset IFS
				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}

# Perform the remediation for the 'adjtimex', 'settimeofday', and 'stime' audit
# system calls on Red Hat Enterprise Linux 6 OS
function rhel6_perform_audit_adjtimex_settimeofday_stime_remediation {

# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=${ARCH} -S .* -k *"
	# Create expected audit group and audit rule form for particular system call & architecture
	if [ ${ARCH} = "b32" ]
	then
		# stime system call is known at 32-bit arch (see e.g "$ ausyscall i386 stime" 's output)
		# so append it to the list of time group system calls to be audited
		GROUP="\(adjtimex\|settimeofday\|stime\)"
		FULL_RULE="-a always,exit -F arch=${ARCH} -S adjtimex -S settimeofday -S stime -k audit_time_rules"
	elif [ ${ARCH} = "b64" ]
	then
		# stime system call isn't known at 64-bit arch (see "$ ausyscall x86_64 stime" 's output)
		# therefore don't add it to the list of time group system calls to be audited
		GROUP="\(adjtimex\|settimeofday\)"
		FULL_RULE="-a always,exit -F arch=${ARCH} -S adjtimex -S settimeofday -k audit_time_rules"
	fi
	# Perform the remediation itself
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

}

rhel6_perform_audit_adjtimex_settimeofday_stime_remediation

# audit_time_rules
-a always,exit -F arch=b32 -S settimeofday -k audit_time_rules
# audit_time_rules
-a always,exit -F arch=b64 -S settimeofday -k audit_time_rules
-a always,exit -F arch=b64 -S adjtimex -S settimeofday -k audit_time_rules
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	# Check if particular audit rule is already defined
	IFS=$'\n' matches=($(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules))
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	# Reset IFS back to default
	unset IFS
	for match in "${matches[@]}"
	do
		files_to_inspect=("${files_to_inspect[@]}" "${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do

	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	IFS=$'\n' existing_rules=($(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file"))
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	# Reset IFS back to default
	unset IFS

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo $rule | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS=$'-S' read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				unset IFS
				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}

# Perform the remediation for the 'adjtimex', 'settimeofday', and 'stime' audit
# system calls on Red Hat Enterprise Linux 6 OS
function rhel6_perform_audit_adjtimex_settimeofday_stime_remediation {

# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=${ARCH} -S .* -k *"
	# Create expected audit group and audit rule form for particular system call & architecture
	if [ ${ARCH} = "b32" ]
	then
		# stime system call is known at 32-bit arch (see e.g "$ ausyscall i386 stime" 's output)
		# so append it to the list of time group system calls to be audited
		GROUP="\(adjtimex\|settimeofday\|stime\)"
		FULL_RULE="-a always,exit -F arch=${ARCH} -S adjtimex -S settimeofday -S stime -k audit_time_rules"
	elif [ ${ARCH} = "b64" ]
	then
		# stime system call isn't known at 64-bit arch (see "$ ausyscall x86_64 stime" 's output)
		# therefore don't add it to the list of time group system calls to be audited
		GROUP="\(adjtimex\|settimeofday\)"
		FULL_RULE="-a always,exit -F arch=${ARCH} -S adjtimex -S settimeofday -k audit_time_rules"
	fi
	# Perform the remediation itself
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

}

rhel6_perform_audit_adjtimex_settimeofday_stime_remediation

# audit_time_rules
-a always,exit -F arch=b32 -S adjtimex -k audit_time_rules
# audit_time_rules
-a always,exit -F arch=b64 -S adjtimex -k audit_time_rules
-a always,exit -F arch=b64 -S adjtimex -S settimeofday -k audit_time_rules
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	# Check if particular audit rule is already defined
	IFS=$'\n' matches=($(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules))
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	# Reset IFS back to default
	unset IFS
	for match in "${matches[@]}"
	do
		files_to_inspect=("${files_to_inspect[@]}" "${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do

	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	IFS=$'\n' existing_rules=($(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file"))
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	# Reset IFS back to default
	unset IFS

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo $rule | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS=$'-S' read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				unset IFS
				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}

# Perform the remediation for the 'adjtimex', 'settimeofday', and 'stime' audit
# system calls on Red Hat Enterprise Linux 6 OS
function rhel6_perform_audit_adjtimex_settimeofday_stime_remediation {

# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=${ARCH} -S .* -k *"
	# Create expected audit group and audit rule form for particular system call & architecture
	if [ ${ARCH} = "b32" ]
	then
		# stime system call is known at 32-bit arch (see e.g "$ ausyscall i386 stime" 's output)
		# so append it to the list of time group system calls to be audited
		GROUP="\(adjtimex\|settimeofday\|stime\)"
		FULL_RULE="-a always,exit -F arch=${ARCH} -S adjtimex -S settimeofday -S stime -k audit_time_rules"
	elif [ ${ARCH} = "b64" ]
	then
		# stime system call isn't known at 64-bit arch (see "$ ausyscall x86_64 stime" 's output)
		# therefore don't add it to the list of time group system calls to be audited
		GROUP="\(adjtimex\|settimeofday\)"
		FULL_RULE="-a always,exit -F arch=${ARCH} -S adjtimex -S settimeofday -k audit_time_rules"
	fi
	# Perform the remediation itself
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

}

rhel6_perform_audit_adjtimex_settimeofday_stime_remediation

-w /var/run/utmp -p wa -k session
-w /var/log/btmp -p wa -k session
-w /var/log/wtmp -p wa -k session

# Perform the remediation
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	# Case when particular audit rule is already defined in some of /etc/audit/rules.d/*.rules file
	# Get pair -- filepath : matching_row into @matches array
	IFS=$'\n' matches=($(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules))
	# Reset IFS back to default
	unset IFS
	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect=("${files_to_inspect[@]}" "$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}

fix_audit_watch_rule "auditctl" "/var/run/utmp" "wa" "session"
fix_audit_watch_rule "auditctl" "/var/log/btmp" "wa" "session"
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	# Case when particular audit rule is already defined in some of /etc/audit/rules.d/*.rules file
	# Get pair -- filepath : matching_row into @matches array
	IFS=$'\n' matches=($(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules))
	# Reset IFS back to default
	unset IFS
	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect=("${files_to_inspect[@]}" "$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}

fix_audit_watch_rule "auditctl" "/var/log/wtmp" "wa" "session"

-a always,exit -F arch=ARCH -S rmdir -S unlink -S unlinkat -S rename -S renameat -F auid>=500 -F auid!=4294967295 -k delete

# Perform the remediation for the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in ${RULE_ARCHS[@]}
do
	PATTERN="-a always,exit -F arch=$ARCH -S .* -F auid>=500 -F auid!=4294967295 -k delete"
	# Use escaped BRE regex to specify rule group
	GROUP="\(rmdir\|unlink\|rename\)"
	FULL_RULE="-a always,exit -F arch=$ARCH -S rmdir -S unlink -S unlinkat -S rename -S renameat -F auid>=500 -F auid!=4294967295 -k delete"
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	# Check if particular audit rule is already defined
	IFS=$'\n' matches=($(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules))
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	# Reset IFS back to default
	unset IFS
	for match in "${matches[@]}"
	do
		files_to_inspect=("${files_to_inspect[@]}" "${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do

	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	IFS=$'\n' existing_rules=($(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file"))
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	# Reset IFS back to default
	unset IFS

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo $rule | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS=$'-S' read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				unset IFS
				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}

	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

-w /etc/sudoers -p wa -k actions

# Perform the remediation
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	# Case when particular audit rule is already defined in some of /etc/audit/rules.d/*.rules file
	# Get pair -- filepath : matching_row into @matches array
	IFS=$'\n' matches=($(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules))
	# Reset IFS back to default
	unset IFS
	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect=("${files_to_inspect[@]}" "$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}

fix_audit_watch_rule "auditctl" "/etc/sudoers" "wa" "actions"

# audit_rules_networkconfig_modification
-a always,exit -F arch=ARCH -S sethostname -S setdomainname -k audit_rules_networkconfig_modification
-w /etc/issue -p wa -k audit_rules_networkconfig_modification
-w /etc/issue.net -p wa -k audit_rules_networkconfig_modification
-w /etc/hosts -p wa -k audit_rules_networkconfig_modification
-w /etc/sysconfig/network -p wa -k audit_rules_networkconfig_modification

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S .* -k *"
	# Use escaped BRE regex to specify rule group
	GROUP="set\(host\|domain\)name"
	FULL_RULE="-a always,exit -F arch=$ARCH -S sethostname -S setdomainname -k audit_rules_networkconfig_modification"
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	# Check if particular audit rule is already defined
	IFS=$'\n' matches=($(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules))
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	# Reset IFS back to default
	unset IFS
	for match in "${matches[@]}"
	do
		files_to_inspect=("${files_to_inspect[@]}" "${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do

	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	IFS=$'\n' existing_rules=($(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file"))
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	# Reset IFS back to default
	unset IFS

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo $rule | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS=$'-S' read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				unset IFS
				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}

	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

# Then perform the remediations for the watch rules
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	# Case when particular audit rule is already defined in some of /etc/audit/rules.d/*.rules file
	# Get pair -- filepath : matching_row into @matches array
	IFS=$'\n' matches=($(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules))
	# Reset IFS back to default
	unset IFS
	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect=("${files_to_inspect[@]}" "$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}

fix_audit_watch_rule "auditctl" "/etc/issue" "wa" "audit_rules_networkconfig_modification"
fix_audit_watch_rule "auditctl" "/etc/issue.net" "wa" "audit_rules_networkconfig_modification"
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	# Case when particular audit rule is already defined in some of /etc/audit/rules.d/*.rules file
	# Get pair -- filepath : matching_row into @matches array
	IFS=$'\n' matches=($(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules))
	# Reset IFS back to default
	unset IFS
	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect=("${files_to_inspect[@]}" "$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}

fix_audit_watch_rule "auditctl" "/etc/hosts" "wa" "audit_rules_networkconfig_modification"
fix_audit_watch_rule "auditctl" "/etc/sysconfig/network" "wa" "audit_rules_networkconfig_modification"

$ sudo find PART -xdev -type f -perm -4000 -o -type f -perm -2000 2>/dev/null
-a always,exit -F path=SETUID_PROG_PATH -F perm=x -F auid>=500 -F auid!=4294967295 -k privileged

# Perform the remediation
# Function to perform remediation for 'audit_rules_privileged_commands' rule
#
# Expects two arguments:
#
# audit_tool		tool used to load audit rules
# 			One of 'auditctl' or 'augenrules'
#
# min_auid		Minimum original ID the user logged in with
# 			'500' for RHEL-6 and before, '1000' for RHEL-7 and after.
#
# Example Call(s):
#
#      perform_audit_rules_privileged_commands_remediation "auditctl" "500"
#      perform_audit_rules_privileged_commands_remediation "augenrules"	"1000"
#
function perform_audit_rules_privileged_commands_remediation {
#
# Load function arguments into local variables
local tool="$1"
local min_auid="$2"

# Check sanity of the input
if [ $# -ne "2" ]
then
	echo "Usage: perform_audit_rules_privileged_commands_remediation 'auditctl | augenrules' '500 | 1000'"
	echo "Aborting."
	exit 1
fi

declare -a files_to_inspect=()

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then:
# * add '/etc/audit/audit.rules'to the list of files to be inspected,
# * specify '/etc/audit/audit.rules' as the output audit file, where
#   missing rules should be inserted
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("/etc/audit/audit.rules")
	output_audit_file="/etc/audit/audit.rules"
#
# If the audit tool is 'augenrules', then:
# * add '/etc/audit/rules.d/*.rules' to the list of files to be inspected
#   (split by newline),
# * specify /etc/audit/rules.d/privileged.rules' as the output file, where
#   missing rules should be inserted
elif [ "$tool" == 'augenrules' ]
then
	IFS=$'\n' files_to_inspect=($(find /etc/audit/rules.d -maxdepth 1 -type f -name '*.rules' -print))
	output_audit_file="/etc/audit/rules.d/privileged.rules"
fi

# Obtain the list of SUID/SGID binaries on the particular system (split by newline)
# into privileged_binaries array
IFS=$'\n' privileged_binaries=($(find / -xdev -type f -perm -4000 -o -type f -perm -2000 2>/dev/null))

# Keep list of SUID/SGID binaries that have been already handled within some previous iteration
declare -a sbinaries_to_skip=()

# For each found sbinary in privileged_binaries list
for sbinary in "${privileged_binaries[@]}"
do

	# Check if this sbinary wasn't already handled in some of the previous iterations
	# Return match only if whole sbinary definition matched (not in the case just prefix matched!!!)
	if [[ $(sed -ne "\|${sbinary}|p" <<< "${sbinaries_to_skip[*]}") ]]
	then
		# If so, don't process it second time & go to process next sbinary
		continue
	fi

	# Reset the counter of inspected files when starting to check
	# presence of existing audit rule for new sbinary
	local count_of_inspected_files=0

	# Define expected rule form for this binary
	expected_rule="-a always,exit -F path=${sbinary} -F perm=x -F auid>=${min_auid} -F auid!=4294967295 -k privileged"

	# If list of audit rules files to be inspected is empty, just add new rule and move on to next binary
	if [[ ${#files_to_inspect[@]} -eq 0 ]]; then
		echo "$expected_rule" >> "$output_audit_file"
		continue
	fi

	# Replace possible slash '/' character in sbinary definition so we could use it in sed expressions below
	sbinary_esc=${sbinary//$'/'/$'\/'}

	# For each audit rules file from the list of files to be inspected
	for afile in "${files_to_inspect[@]}"
	do

		# Search current audit rules file's content for match. Match criteria:
		# * existing rule is for the same SUID/SGID binary we are currently processing (but
		#   can contain multiple -F path= elements covering multiple SUID/SGID binaries)
		# * existing rule contains all arguments from expected rule form (though can contain
		#   them in arbitrary order)

		base_search=$(sed -e '/-a always,exit/!d' -e '/-F path='"${sbinary_esc}"'/!d' \
				-e '/-F path=[^[:space:]]\+/!d'   -e '/-F perm=.*/!d'                 \
				-e '/-F auid>='"${min_auid}"'/!d' -e '/-F auid!=4294967295/!d'        \
				-e '/-k privileged/!d' "$afile")

		# Increase the count of inspected files for this sbinary
		count_of_inspected_files=$((count_of_inspected_files + 1))

		# Require execute access type to be set for existing audit rule
		exec_access='x'

		# Search current audit rules file's content for presence of rule pattern for this sbinary
		if [[ $base_search ]]
		then

			# Current audit rules file already contains rule for this binary =>
			# Store the exact form of found rule for this binary for further processing
			concrete_rule=$base_search

			# Select all other SUID/SGID binaries possibly also present in the found rule
			IFS=$'\n' handled_sbinaries=($(grep -o -e "-F path=[^[:space:]]\+" <<< "$concrete_rule"))
			IFS=$' ' handled_sbinaries=(${handled_sbinaries[@]//-F path=/})

			# Merge the list of such SUID/SGID binaries found in this iteration with global list ignoring duplicates
			sbinaries_to_skip=($(for i in "${sbinaries_to_skip[@]}" "${handled_sbinaries[@]}"; do echo "$i"; done | sort -du))

			# Separate concrete_rule into three sections using hash '#'
			# sign as a delimiter around rule's permission section borders
			concrete_rule="$(echo "$concrete_rule" | sed -n "s/\(.*\)\+\(-F perm=[rwax]\+\)\+/\1#\2#/p")"

			# Split concrete_rule into head, perm, and tail sections using hash '#' delimiter
			IFS=$'#' read -r rule_head rule_perm rule_tail <<<  "$concrete_rule"

			# Extract already present exact access type [r|w|x|a] from rule's permission section
			access_type=${rule_perm//-F perm=/}

			# Verify current permission access type(s) for rule contain 'x' (execute) permission
			if ! grep -q "$exec_access" <<< "$access_type"
			then

				# If not, append the 'x' (execute) permission to the existing access type bits
				access_type="$access_type$exec_access"
				# Reconstruct the permissions section for the rule
				new_rule_perm="-F perm=$access_type"
				# Update existing rule in current audit rules file with the new permission section
				sed -i "s#${rule_head}\(.*\)${rule_tail}#${rule_head}${new_rule_perm}${rule_tail}#" "$afile"

			fi

		# If the required audit rule for particular sbinary wasn't found yet, insert it under following conditions:
		#
		# * in the "auditctl" mode of operation insert particular rule each time
		#   (because in this mode there's only one file -- /etc/audit/audit.rules to be inspected for presence of this rule),
		#
		# * in the "augenrules" mode of operation insert particular rule only once and only in case we have already
		#   searched all of the files from /etc/audit/rules.d/*.rules location (since that audit rule can be defined
		#   in any of those files and if not, we want it to be inserted only once into /etc/audit/rules.d/privileged.rules file)
		#
		elif [ "$tool" == "auditctl" ] || [[ "$tool" == "augenrules" && $count_of_inspected_files -eq "${#files_to_inspect[@]}" ]]
		then

			# Current audit rules file's content doesn't contain expected rule for this
			# SUID/SGID binary yet => append it
			echo "$expected_rule" >> "$output_audit_file"
			continue
		fi

	done

done
}

perform_audit_rules_privileged_commands_remediation "auditctl" "500"

- name: Search for privileged commands
  shell: "find / -xdev -type f -perm -4000 -o -type f -perm -2000 2>/dev/null | cat"
  check_mode: no
  register: find_result
  tags:
    - audit_rules_privileged_commands
    - unknown_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-26457-2
    - NIST-800-53-AC-3(10))
    - NIST-800-53-AU-1(b)
    - NIST-800-53-AU-2(a)
    - NIST-800-53-AU-2(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(a)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-IR-5
    - PCI-DSS-Req-10.2.2
    - DISA-STIG-RHEL-06-000198

# Inserts/replaces the rule in /etc/audit/rules.d

- name: Search /etc/audit/rules.d for audit rule entries
  find:
    paths: "/etc/audit/rules.d"
    recurse: no
    contains: "^.*path={{ item }} .*$"
    patterns: "*.rules"
  with_items:
    - "{{ find_result.stdout_lines }}"
  register: files_result
  tags:
    - audit_rules_privileged_commands
    - unknown_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-26457-2
    - NIST-800-53-AC-3(10))
    - NIST-800-53-AU-1(b)
    - NIST-800-53-AU-2(a)
    - NIST-800-53-AU-2(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(a)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-IR-5
    - PCI-DSS-Req-10.2.2
    - DISA-STIG-RHEL-06-000198

- name: Overwrites the rule in rules.d
  lineinfile:
    path: "{{ item.1.path }}"
    line: '-a always,exit -F path={{ item.0.item }} -F perm=x -F auid>=1000 -F auid!=4294967295 -F key=privileged'
    create: no
    regexp: "^.*path={{ item.0.item }} .*$"
  with_subelements:
    - "{{ files_result.results }}"
    - files
  tags:
    - audit_rules_privileged_commands
    - unknown_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-26457-2
    - NIST-800-53-AC-3(10))
    - NIST-800-53-AU-1(b)
    - NIST-800-53-AU-2(a)
    - NIST-800-53-AU-2(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(a)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-IR-5
    - PCI-DSS-Req-10.2.2
    - DISA-STIG-RHEL-06-000198

- name: Adds the rule in rules.d
  lineinfile:
    path: /etc/audit/rules.d/privileged.rules
    line: '-a always,exit -F path={{ item.item }} -F perm=x -F auid>=1000 -F auid!=4294967295 -F key=privileged'
    create: yes
  with_items:
    - "{{ files_result.results }}"
  when: item.matched == 0
  tags:
    - audit_rules_privileged_commands
    - unknown_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-26457-2
    - NIST-800-53-AC-3(10))
    - NIST-800-53-AU-1(b)
    - NIST-800-53-AU-2(a)
    - NIST-800-53-AU-2(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(a)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-IR-5
    - PCI-DSS-Req-10.2.2
    - DISA-STIG-RHEL-06-000198

# Adds/overwrites the rule in /etc/audit/audit.rules

- name: Inserts/replaces the rule in audit.rules
  lineinfile:
    path: /etc/audit/audit.rules
    line: '-a always,exit -F path={{ item.item }} -F perm=x -F auid>=1000 -F auid!=4294967295 -F key=privileged'
    create: yes
    regexp: "^.*path={{ item.item }} .*$"
  with_items:
    - "{{ files_result.results }}"
  tags:
    - audit_rules_privileged_commands
    - unknown_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-26457-2
    - NIST-800-53-AC-3(10))
    - NIST-800-53-AU-1(b)
    - NIST-800-53-AU-2(a)
    - NIST-800-53-AU-2(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(a)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-IR-5
    - PCI-DSS-Req-10.2.2
    - DISA-STIG-RHEL-06-000198

-a always,exit -F arch=ARCH -S mount -F auid>=500 -F auid!=4294967295 -k export

# Perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S .* -F auid>=500 -F auid!=4294967295 -k *"
	GROUP="mount"
	FULL_RULE="-a always,exit -F arch=$ARCH -S mount -F auid>=500 -F auid!=4294967295 -k export"
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	# Check if particular audit rule is already defined
	IFS=$'\n' matches=($(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules))
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	# Reset IFS back to default
	unset IFS
	for match in "${matches[@]}"
	do
		files_to_inspect=("${files_to_inspect[@]}" "${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do

	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	IFS=$'\n' existing_rules=($(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file"))
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	# Reset IFS back to default
	unset IFS

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo $rule | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS=$'-S' read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				unset IFS
				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}

	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

-w /sbin/insmod -p x -k modules
-w /sbin/rmmod -p x -k modules
-w /sbin/modprobe -p x -k modules
-a always,exit -F arch=ARCH -S init_module -S delete_module -k modules

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
# Note: 32-bit kernel modules can't be loaded / unloaded on 64-bit kernel =>
#       it's not required on a 64-bit system to check also for the presence
#       of 32-bit's equivalent of the corresponding rule. Therefore for
#       each system it's enought to check presence of system's native rule form.
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S .* -k *"
	# Use escaped BRE regex to specify rule group
	GROUP="\(init\|delete\)_module"
	FULL_RULE="-a always,exit -F arch=$ARCH -S init_module -S delete_module -k modules"
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	# Check if particular audit rule is already defined
	IFS=$'\n' matches=($(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules))
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	# Reset IFS back to default
	unset IFS
	for match in "${matches[@]}"
	do
		files_to_inspect=("${files_to_inspect[@]}" "${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do

	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	IFS=$'\n' existing_rules=($(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file"))
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	# Reset IFS back to default
	unset IFS

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo $rule | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS=$'-S' read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				unset IFS
				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}

	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

# Then perform the remediations for the watch rules
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	# Case when particular audit rule is already defined in some of /etc/audit/rules.d/*.rules file
	# Get pair -- filepath : matching_row into @matches array
	IFS=$'\n' matches=($(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules))
	# Reset IFS back to default
	unset IFS
	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect=("${files_to_inspect[@]}" "$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}

fix_audit_watch_rule "auditctl" "/sbin/insmod" "x" "modules"
fix_audit_watch_rule "auditctl" "/sbin/rmmod" "x" "modules"
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	# Case when particular audit rule is already defined in some of /etc/audit/rules.d/*.rules file
	# Get pair -- filepath : matching_row into @matches array
	IFS=$'\n' matches=($(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules))
	# Reset IFS back to default
	unset IFS
	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect=("${files_to_inspect[@]}" "$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}

fix_audit_watch_rule "auditctl" "/sbin/modprobe" "x" "modules"

-a always,exit -F arch=b32 -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EACCES -F auid>=500 -F auid!=4294967295 -k access
-a always,exit -F arch=b32 -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EPERM -F auid>=500 -F auid!=4294967295 -k access
-a always,exit -F arch=b64 -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EACCES -F auid>=500 -F auid!=4294967295 -k access
-a always,exit -F arch=b64 -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EPERM -F auid>=500 -F auid!=4294967295 -k access

# Perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do

	# First fix the -EACCES requirement
	PATTERN="-a always,exit -F arch=$ARCH -S .* -F exit=-EACCES -F auid>=500 -F auid!=4294967295 -k *"
	# Use escaped BRE regex to specify rule group
	GROUP="\(creat\|open\|truncate\)"
	FULL_RULE="-a always,exit -F arch=$ARCH -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EACCES -F auid>=500 -F auid!=4294967295 -k access"
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	# Check if particular audit rule is already defined
	IFS=$'\n' matches=($(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules))
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	# Reset IFS back to default
	unset IFS
	for match in "${matches[@]}"
	do
		files_to_inspect=("${files_to_inspect[@]}" "${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do

	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	IFS=$'\n' existing_rules=($(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file"))
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	# Reset IFS back to default
	unset IFS

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo $rule | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS=$'-S' read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				unset IFS
				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}

	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"

	# Then fix the -EPERM requirement
	PATTERN="-a always,exit -F arch=$ARCH -S .* -F exit=-EPERM -F auid>=500 -F auid!=4294967295 -k *"
	# No need to change content of $GROUP variable - it's the same as for -EACCES case above
	FULL_RULE="-a always,exit -F arch=$ARCH -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EPERM -F auid>=500 -F auid!=4294967295 -k access"
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	# Check if particular audit rule is already defined
	IFS=$'\n' matches=($(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules))
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	# Reset IFS back to default
	unset IFS
	for match in "${matches[@]}"
	do
		files_to_inspect=("${files_to_inspect[@]}" "${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do

	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	IFS=$'\n' existing_rules=($(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file"))
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	# Reset IFS back to default
	unset IFS

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo $rule | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS=$'-S' read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				unset IFS
				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}

	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"

done

-w /var/log/tallylog -p wa -k logins
-w /var/run/faillock/ -p wa -k logins
-w /var/log/lastlog -p wa -k logins

# Perform the remediation
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	# Case when particular audit rule is already defined in some of /etc/audit/rules.d/*.rules file
	# Get pair -- filepath : matching_row into @matches array
	IFS=$'\n' matches=($(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules))
	# Reset IFS back to default
	unset IFS
	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect=("${files_to_inspect[@]}" "$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}

fix_audit_watch_rule "auditctl" "/var/log/tallylog" "wa" "logins"
fix_audit_watch_rule "auditctl" "/var/run/faillock/" "wa" "logins"
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	# Case when particular audit rule is already defined in some of /etc/audit/rules.d/*.rules file
	# Get pair -- filepath : matching_row into @matches array
	IFS=$'\n' matches=($(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules))
	# Reset IFS back to default
	unset IFS
	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect=("${files_to_inspect[@]}" "$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}

fix_audit_watch_rule "auditctl" "/var/log/lastlog" "wa" "logins"

# audit_rules_usergroup_modification
-w /etc/group -p wa -k audit_rules_usergroup_modification
-w /etc/passwd -p wa -k audit_rules_usergroup_modification
-w /etc/gshadow -p wa -k audit_rules_usergroup_modification
-w /etc/shadow -p wa -k audit_rules_usergroup_modification
-w /etc/security/opasswd -p wa -k audit_rules_usergroup_modification

# Perform the remediation
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	# Case when particular audit rule is already defined in some of /etc/audit/rules.d/*.rules file
	# Get pair -- filepath : matching_row into @matches array
	IFS=$'\n' matches=($(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules))
	# Reset IFS back to default
	unset IFS
	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect=("${files_to_inspect[@]}" "$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}

fix_audit_watch_rule "auditctl" "/etc/group" "wa" "audit_rules_usergroup_modification"
fix_audit_watch_rule "auditctl" "/etc/passwd" "wa" "audit_rules_usergroup_modification"
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	# Case when particular audit rule is already defined in some of /etc/audit/rules.d/*.rules file
	# Get pair -- filepath : matching_row into @matches array
	IFS=$'\n' matches=($(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules))
	# Reset IFS back to default
	unset IFS
	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect=("${files_to_inspect[@]}" "$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}

fix_audit_watch_rule "auditctl" "/etc/gshadow" "wa" "audit_rules_usergroup_modification"
fix_audit_watch_rule "auditctl" "/etc/shadow" "wa" "audit_rules_usergroup_modification"
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	# Case when particular audit rule is already defined in some of /etc/audit/rules.d/*.rules file
	# Get pair -- filepath : matching_row into @matches array
	IFS=$'\n' matches=($(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules))
	# Reset IFS back to default
	unset IFS
	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect=("${files_to_inspect[@]}" "$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}

fix_audit_watch_rule "auditctl" "/etc/security/opasswd" "wa" "audit_rules_usergroup_modification"

-e 2

readonly AUDIT_RULES='/etc/audit/audit.rules'

# If '-e .*' setting present in audit.rules already, delete it since the
# auditctl(8) manual page instructs it should be the last rule in configuration
sed -i '/-e[[:space:]]\+.*/d' $AUDIT_RULES

# Append '-e 2' requirement at the end of audit.rules
echo '' >> $AUDIT_RULES
echo '# Set the audit.rules configuration immutable per security requirements' >> $AUDIT_RULES
echo '# Reboot is required to change audit rules once this setting is applied' >> $AUDIT_RULES
echo '-e 2' >> $AUDIT_RULES

-w /etc/selinux/ -p wa -k MAC-policy

# Perform the remediation
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("${files_to_inspect[@]}" '/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	# Case when particular audit rule is already defined in some of /etc/audit/rules.d/*.rules file
	# Get pair -- filepath : matching_row into @matches array
	IFS=$'\n' matches=($(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules))
	# Reset IFS back to default
	unset IFS
	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect=("${files_to_inspect[@]}" "$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		files_to_inspect="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$files_to_inspect" ]
		then
			touch "$files_to_inspect"
			chmod 0640 "$files_to_inspect"
		fi
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}

fix_audit_watch_rule "auditctl" "/etc/selinux/" "wa" "MAC-policy"

kernel /vmlinuz-version ro vga=ext root=/dev/VolGroup00/LogVol00 rhgb quiet audit=1
/sbin/grubby --update-kernel=ALL --args="audit=1"

- name: "Enable Auditing for Processes Which Start Prior to the Audit Daemon"
  shell: /sbin/grubby --update-kernel=ALL --args="audit=1"
  tags:
    - bootloader_audit_argument
    - low_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - CCE-26785-6
    - NIST-800-53-AC-17(1)
    - NIST-800-53-AU-14(1)
    - NIST-800-53-AU-1(b)
    - NIST-800-53-AU-2(a)
    - NIST-800-53-AU-2(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-AU-10
    - NIST-800-53-IR-5
    - PCI-DSS-Req-10.3
    - DISA-STIG-RHEL-06-000525

$ sudo chkconfig --level 2345 auditd on
# Function to enable/disable and start/stop services on RHEL and Fedora systems.
#
# Example Call(s):
#
#     service_command enable bluetooth
#     service_command disable bluetooth.service
#
#     Using xinetd:
#     service_command disable rsh.socket xinetd=rsh
#
function service_command {

# Load function arguments into local variables
local service_state=$1
local service=$2
local xinetd=$(echo $3 | cut -d'=' -f2)

# Check sanity of the input
if [ $# -lt "2" ]
then
  echo "Usage: service_command 'enable/disable' 'service_name.service'"
  echo
  echo "To enable or disable xinetd services add \'xinetd=service_name\'"
  echo "as the last argument"  
  echo "Aborting."
  exit 1
fi

# If systemctl is installed, use systemctl command; otherwise, use the service/chkconfig commands
if [ -f "/usr/bin/systemctl" ] ; then
  service_util="/usr/bin/systemctl"
else
  service_util="/sbin/service"
  chkconfig_util="/sbin/chkconfig"
fi

# If disable is not specified in arg1, set variables to enable services.
# Otherwise, variables are to be set to disable services.
if [ "$service_state" != 'disable' ] ; then
  service_state="enable"
  service_operation="start"
  chkconfig_state="on"
else
  service_state="disable"
  service_operation="stop"
  chkconfig_state="off"
fi

# If chkconfig_util is not empty, use chkconfig/service commands.
if [ "x$chkconfig_util" != x ] ; then
  $service_util $service $service_operation
  $chkconfig_util --level 0123456 $service $chkconfig_state
else
  $service_util $service_operation $service
  $service_util $service_state $service
  # The service may not be running because it has been started and failed,
  # so let's reset the state so OVAL checks pass.
  # Service should be 'inactive', not 'failed' after reboot though.
  $service_util reset-failed $service
fi

# Test if local variable xinetd is empty using non-bashism.
# If empty, then xinetd is not being used.
if [ "x$xinetd" != x ] ; then
  grep -qi disable /etc/xinetd.d/$xinetd && \

  if [ "$service_operation" = 'disable' ] ; then
    sed -i "s/disable.*/disable         = no/gI" /etc/xinetd.d/$xinetd
  else
    sed -i "s/disable.*/disable         = yes/gI" /etc/xinetd.d/$xinetd
  fi
fi

}

service_command enable auditd

- name: Enable service auditd
  service:
    name="{{item}}"
    enabled="yes"
    state="started"
  with_items:
    - auditd
  tags:
    - service_auditd_enabled
    - medium_severity
    - enable_strategy
    - low_complexity
    - low_disruption
    - CCE-27058-7
    - NIST-800-53-AC-17(1)
    - NIST-800-53-AU-1(b)
    - NIST-800-53-AU-10
    - NIST-800-53-AU-12(a)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-IR-5
    - PCI-DSS-Req-10
    - DISA-STIG-RHEL-06-000145

$ mount -t xfs | awk '{print $3}'
$ sudo chown root /etc/shadow 
chown root /etc/shadow

$ sudo chmod 0000 /etc/shadow
chmod 0000 /etc/shadow

- name: Ensure permission 0000 on /etc/shadow
  file:
    path="{{item}}"
    mode=0000
  with_items:
    - /etc/shadow
  tags:
    - file_permissions_etc_shadow
    - medium_severity
    - configure_strategy
    - low_complexity
    - low_disruption
    - CCE-26992-8
    - NIST-800-53-AC-6
    - PCI-DSS-Req-8.7.c
    - DISA-STIG-RHEL-06-000035

$ sudo chgrp root /etc/shadow 
chgrp root /etc/shadow

$ sudo chown root /etc/gshadow 

chown root /etc/gshadow

- name: Find /etc/gshadow file(s)
  find:
    paths: "{{ '/etc/gshadow' | dirname }}"
    patterns: "{{ '/etc/gshadow' | basename }}"
  register: files_found
  tags:
    - file_owner_etc_gshadow
    - medium_severity
    - configure_strategy
    - low_complexity
    - low_disruption
    - CCE-27026-4
    - NIST-800-53-AC-6
    - DISA-STIG-RHEL-06-000036

- name: Set user ownership to root
  file:
    path: "{{ item.path }}"
    owner: root
  with_items:
    - "{{ files_found.files }}"
  tags:
    - file_owner_etc_gshadow
    - medium_severity
    - configure_strategy
    - low_complexity
    - low_disruption
    - CCE-27026-4
    - NIST-800-53-AC-6
    - DISA-STIG-RHEL-06-000036

$ sudo chmod 644 /etc/group

chmod 0644 /etc/group

- name: Find /etc/group file(s)
  find:
    paths: "{{ '/etc/group' | dirname }}"
    patterns: "{{ '/etc/group' | basename }}"
  register: files_found
  tags:
    - file_permissions_etc_group
    - medium_severity
    - configure_strategy
    - low_complexity
    - low_disruption
    - CCE-26954-8
    - NIST-800-53-AC-6
    - PCI-DSS-Req-8.7.c
    - DISA-STIG-RHEL-06-000044

- name: Set permissions
  file:
    path: "{{ item.path }}"
    mode: 0644
  with_items:
    - "{{ files_found.files }}"
  tags:
    - file_permissions_etc_group
    - medium_severity
    - configure_strategy
    - low_complexity
    - low_disruption
    - CCE-26954-8
    - NIST-800-53-AC-6
    - PCI-DSS-Req-8.7.c
    - DISA-STIG-RHEL-06-000044

$ sudo chgrp root /etc/gshadow 

chgrp root /etc/gshadow

- name: Find /etc/gshadow file(s)
  find:
    paths: "{{ '/etc/gshadow' | dirname }}"
    patterns: "{{ '/etc/gshadow' | basename }}"
  register: files_found
  tags:
    - file_groupowner_etc_gshadow
    - medium_severity
    - configure_strategy
    - low_complexity
    - low_disruption
    - CCE-26975-3
    - NIST-800-53-AC-6
    - DISA-STIG-RHEL-06-000037

- name: Set group ownership to root
  file:
    path: "{{ item.path }}"
    group: root
  with_items:
    - "{{ files_found.files }}"
  tags:
    - file_groupowner_etc_gshadow
    - medium_severity
    - configure_strategy
    - low_complexity
    - low_disruption
    - CCE-26975-3
    - NIST-800-53-AC-6
    - DISA-STIG-RHEL-06-000037

$ sudo chgrp root /etc/passwd 

chgrp root /etc/passwd

- name: Find /etc/passwd file(s)
  find:
    paths: "{{ '/etc/passwd' | dirname }}"
    patterns: "{{ '/etc/passwd' | basename }}"
  register: files_found
  tags:
    - file_groupowner_etc_passwd
    - medium_severity
    - configure_strategy
    - low_complexity
    - low_disruption
    - CCE-26856-5
    - NIST-800-53-AC-6
    - PCI-DSS-Req-8.7.c
    - DISA-STIG-RHEL-06-000040

- name: Set group ownership to root
  file:
    path: "{{ item.path }}"
    group: root
  with_items:
    - "{{ files_found.files }}"
  tags:
    - file_groupowner_etc_passwd
    - medium_severity
    - configure_strategy
    - low_complexity
    - low_disruption
    - CCE-26856-5
    - NIST-800-53-AC-6
    - PCI-DSS-Req-8.7.c
    - DISA-STIG-RHEL-06-000040

$ sudo chown root /etc/group 

chown root /etc/group

- name: Find /etc/group file(s)
  find:
    paths: "{{ '/etc/group' | dirname }}"
    patterns: "{{ '/etc/group' | basename }}"
  register: files_found
  tags:
    - file_owner_etc_group
    - medium_severity
    - configure_strategy
    - low_complexity
    - low_disruption
    - CCE-26822-7
    - NIST-800-53-AC-6
    - PCI-DSS-Req-8.7.c
    - DISA-STIG-RHEL-06-000042

- name: Set user ownership to root
  file:
    path: "{{ item.path }}"
    owner: root
  with_items:
    - "{{ files_found.files }}"
  tags:
    - file_owner_etc_group
    - medium_severity
    - configure_strategy
    - low_complexity
    - low_disruption
    - CCE-26822-7
    - NIST-800-53-AC-6
    - PCI-DSS-Req-8.7.c
    - DISA-STIG-RHEL-06-000042

$ sudo chgrp root /etc/group 

chgrp root /etc/group

- name: Find /etc/group file(s)
  find:
    paths: "{{ '/etc/group' | dirname }}"
    patterns: "{{ '/etc/group' | basename }}"
  register: files_found
  tags:
    - file_groupowner_etc_group
    - medium_severity
    - configure_strategy
    - low_complexity
    - low_disruption
    - CCE-26930-8
    - NIST-800-53-AC-6
    - PCI-DSS-Req-8.7.c
    - DISA-STIG-RHEL-06-000043

- name: Set group ownership to root
  file:
    path: "{{ item.path }}"
    group: root
  with_items:
    - "{{ files_found.files }}"
  tags:
    - file_groupowner_etc_group
    - medium_severity
    - configure_strategy
    - low_complexity
    - low_disruption
    - CCE-26930-8
    - NIST-800-53-AC-6
    - PCI-DSS-Req-8.7.c
    - DISA-STIG-RHEL-06-000043

$ sudo chmod 0000 /etc/gshadow
chmod 0000 /etc/gshadow

- name: Ensure permission 0000 on /etc/gshadow
  file:
    path="{{item}}"
    mode=0000
  with_items:
    - /etc/gshadow
  tags:
    - file_permissions_etc_gshadow
    - medium_severity
    - configure_strategy
    - low_complexity
    - low_disruption
    - CCE-26951-4
    - NIST-800-53-AC-6
    - DISA-STIG-RHEL-06-000038

$ sudo chown root /etc/passwd 

chown root /etc/passwd

- name: Find /etc/passwd file(s)
  find:
    paths: "{{ '/etc/passwd' | dirname }}"
    patterns: "{{ '/etc/passwd' | basename }}"
  register: files_found
  tags:
    - file_owner_etc_passwd
    - medium_severity
    - configure_strategy
    - low_complexity
    - low_disruption
    - CCE-26953-0
    - NIST-800-53-AC-6
    - PCI-DSS-Req-8.7.c
    - DISA-STIG-RHEL-06-000039

- name: Set user ownership to root
  file:
    path: "{{ item.path }}"
    owner: root
  with_items:
    - "{{ files_found.files }}"
  tags:
    - file_owner_etc_passwd
    - medium_severity
    - configure_strategy
    - low_complexity
    - low_disruption
    - CCE-26953-0
    - NIST-800-53-AC-6
    - PCI-DSS-Req-8.7.c
    - DISA-STIG-RHEL-06-000039

$ sudo chmod 0644 /etc/passwd
chmod 0644 /etc/passwd

- name: Ensure permission 0644 on /etc/passwd
  file:
    path="{{item}}"
    mode=0644
  with_items:
    - /etc/passwd
  tags:
    - file_permissions_etc_passwd
    - medium_severity
    - configure_strategy
    - low_complexity
    - low_disruption
    - CCE-26868-0
    - NIST-800-53-AC-6
    - PCI-DSS-Req-8.7.c
    - DISA-STIG-RHEL-06-000041

/bin
/sbin
/usr/bin
/usr/libexec
/usr/local/bin
/usr/local/sbin
/usr/sbin
$ sudo chmod go-w FILE
DIRS="/bin /usr/bin /usr/local/bin /sbin /usr/sbin /usr/local/sbin /usr/libexec"
for dirPath in $DIRS; do
	find "$dirPath" -perm /022 -exec chmod go-w '{}' \;
done

- name: "Read list of world and group writable system executables"
  shell: "find /bin /usr/bin /usr/local/bin /sbin /usr/sbin /usr/local/sbin /usr/libexec -perm /022 -type f"
  register: world_writable_library_files
  changed_when: False
  failed_when: False
  check_mode: no
  tags:
    - file_permissions_binary_dirs
    - medium_severity
    - restrict_strategy
    - medium_complexity
    - medium_disruption
    - CCE-27289-8
    - NIST-800-53-AC-6
    - DISA-STIG-RHEL-06-000047

- name: "Remove world/group writability of system executables"
  file:
    path: "{{item}}"
    mode: "go-w"
  with_items: "{{ world_writable_library_files.stdout_lines }}"
  when: world_writable_library_files.stdout_lines | length > 0
  tags:
    - file_permissions_binary_dirs
    - medium_severity
    - restrict_strategy
    - medium_complexity
    - medium_disruption
    - CCE-27289-8
    - NIST-800-53-AC-6
    - DISA-STIG-RHEL-06-000047

$ sudo chmod +t DIR
$ find /lib/modules/`uname -r`/kernel/fs -type f -name '*.ko'
install freevxfs /bin/true
if grep --silent "^install freevxfs" /etc/modprobe.d/freevxfs.conf ; then
	sed -i 's/^install freevxfs.*/install freevxfs /bin/true/g' /etc/modprobe.d/freevxfs.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/freevxfs.conf
	echo "install freevxfs /bin/true" >> /etc/modprobe.d/freevxfs.conf
fi

- name: Ensure kernel module 'freevxfs' is disabled
  lineinfile:
    create=yes
    dest="/etc/modprobe.d/{{item}}.conf"
    regexp="{{item}}"
    line="install {{item}} /bin/true"
  with_items:
    - freevxfs
  tags:
    - kernel_module_freevxfs_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-26544-7
    - NIST-800-53-CM-7

install cramfs /bin/true
if grep --silent "^install cramfs" /etc/modprobe.d/cramfs.conf ; then
	sed -i 's/^install cramfs.*/install cramfs /bin/true/g' /etc/modprobe.d/cramfs.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/cramfs.conf
	echo "install cramfs /bin/true" >> /etc/modprobe.d/cramfs.conf
fi

- name: Ensure kernel module 'cramfs' is disabled
  lineinfile:
    create=yes
    dest="/etc/modprobe.d/{{item}}.conf"
    regexp="{{item}}"
    line="install {{item}} /bin/true"
  with_items:
    - cramfs
  tags:
    - kernel_module_cramfs_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-26340-0
    - NIST-800-53-CM-7

install squashfs /bin/true
if grep --silent "^install squashfs" /etc/modprobe.d/squashfs.conf ; then
	sed -i 's/^install squashfs.*/install squashfs /bin/true/g' /etc/modprobe.d/squashfs.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/squashfs.conf
	echo "install squashfs /bin/true" >> /etc/modprobe.d/squashfs.conf
fi

- name: Ensure kernel module 'squashfs' is disabled
  lineinfile:
    create=yes
    dest="/etc/modprobe.d/{{item}}.conf"
    regexp="{{item}}"
    line="install {{item}} /bin/true"
  with_items:
    - squashfs
  tags:
    - kernel_module_squashfs_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-26404-4
    - NIST-800-53-CM-7

install jffs2 /bin/true
if grep --silent "^install jffs2" /etc/modprobe.d/jffs2.conf ; then
	sed -i 's/^install jffs2.*/install jffs2 /bin/true/g' /etc/modprobe.d/jffs2.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/jffs2.conf
	echo "install jffs2 /bin/true" >> /etc/modprobe.d/jffs2.conf
fi

- name: Ensure kernel module 'jffs2' is disabled
  lineinfile:
    create=yes
    dest="/etc/modprobe.d/{{item}}.conf"
    regexp="{{item}}"
    line="install {{item}} /bin/true"
  with_items:
    - jffs2
  tags:
    - kernel_module_jffs2_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-26670-0
    - NIST-800-53-CM-7

install hfs /bin/true
if grep --silent "^install hfs" /etc/modprobe.d/hfs.conf ; then
	sed -i 's/^install hfs.*/install hfs /bin/true/g' /etc/modprobe.d/hfs.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/hfs.conf
	echo "install hfs /bin/true" >> /etc/modprobe.d/hfs.conf
fi

- name: Ensure kernel module 'hfs' is disabled
  lineinfile:
    create=yes
    dest="/etc/modprobe.d/{{item}}.conf"
    regexp="{{item}}"
    line="install {{item}} /bin/true"
  with_items:
    - hfs
  tags:
    - kernel_module_hfs_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-26800-3
    - NIST-800-53-CM-7

install udf /bin/true
if grep --silent "^install udf" /etc/modprobe.d/udf.conf ; then
	sed -i 's/^install udf.*/install udf /bin/true/g' /etc/modprobe.d/udf.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/udf.conf
	echo "install udf /bin/true" >> /etc/modprobe.d/udf.conf
fi

- name: Ensure kernel module 'udf' is disabled
  lineinfile:
    create=yes
    dest="/etc/modprobe.d/{{item}}.conf"
    regexp="{{item}}"
    line="install {{item}} /bin/true"
  with_items:
    - udf
  tags:
    - kernel_module_udf_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-26677-5
    - NIST-800-53-CM-7

install hfsplus /bin/true
if grep --silent "^install hfsplus" /etc/modprobe.d/hfsplus.conf ; then
	sed -i 's/^install hfsplus.*/install hfsplus /bin/true/g' /etc/modprobe.d/hfsplus.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/hfsplus.conf
	echo "install hfsplus /bin/true" >> /etc/modprobe.d/hfsplus.conf
fi

- name: Ensure kernel module 'hfsplus' is disabled
  lineinfile:
    create=yes
    dest="/etc/modprobe.d/{{item}}.conf"
    regexp="{{item}}"
    line="install {{item}} /bin/true"
  with_items:
    - hfsplus
  tags:
    - kernel_module_hfsplus_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-26361-6
    - NIST-800-53-CM-7

function include_mount_options_functions {
	:
}

# $1: mount point
# $2: new mount point option
function ensure_mount_option_in_fstab {
	local _mount_point="$1" _new_opt="$2" _mount_point_match_regexp="" _previous_mount_opts=""
	_mount_point_match_regexp="$(get_mount_point_regexp "$_mount_point")"

	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -c "$_new_opt" ) -eq 0 ]; then
		_previous_mount_opts=$(grep "$_mount_point_match_regexp" /etc/fstab | awk '{print $4}')
		sed -i "s|\(${_mount_point_match_regexp}.*${_previous_mount_opts}\)|\1,${_new_opt}|" /etc/fstab
	fi
}

# $1: mount point
function get_mount_point_regexp {
		printf "[[:space:]]%s[[:space:]]" "$1"
}

# $1: mount point
function assert_mount_point_in_fstab {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	grep "$_mount_point_match_regexp" -q /etc/fstab \
		|| { echo "The mount point '$1' is not even in /etc/fstab, so we can't set up mount options" >&2; return 1; }
}

# $1: mount point
function remove_defaults_from_fstab_if_overriden {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -q "defaults,") -gt 0 ]
	then
		sed -i "s|\(${_mount_point_match_regexp}.*\)defaults,|\1|" /etc/fstab
	fi
}

# $1: mount point
function ensure_partition_is_mounted {
	local _mount_point="$1"
	mkdir -p "$_mount_point" || return 1
	if mountpoint -q "$_mount_point"; then
		mount -o remount --target "$_mount_point"
	else
		mount --target "$_mount_point"
	fi
}

include_mount_options_functions

# test "$mount_has_to_exist" = 'yes'
test "yes" = 'yes' && assert_mount_point_in_fstab /dev/shm \
	|| { echo "Not remediating, because there is no record of /dev/shm in /etc/fstab" >&2; exit 1; }

ensure_mount_option_in_fstab "/dev/shm" "noexec"

ensure_partition_is_mounted "/dev/shm"

- name: get back device associated to mountpoint
  shell: mount | grep ' /dev/shm ' |cut -d ' ' -f 1
  register: device_name
  check_mode: no
  tags:
    - mount_option_dev_shm_noexec
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26622-1
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

- name: get back device previous mount option
  shell: mount | grep ' /dev/shm ' | sed -re 's:.*\((.*)\):\1:'
  register: device_cur_mountoption
  check_mode: no
  tags:
    - mount_option_dev_shm_noexec
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26622-1
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

- name: get back device fstype
  shell: mount | grep ' /dev/shm ' | cut -d ' ' -f 5
  register: device_fstype
  check_mode: no
  tags:
    - mount_option_dev_shm_noexec
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26622-1
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

- name: Ensure permission noexec are set on /dev/shm
  mount:
    path: "/dev/shm"
    src: "{{device_name.stdout}}"
    opts: "{{device_cur_mountoption.stdout}},noexec"
    state: "mounted"
    fstype: "{{device_fstype.stdout}}"
  tags:
    - mount_option_dev_shm_noexec
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26622-1
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

/tmp     /var/tmp     none     rw,nodev,noexec,nosuid,bind     0 0
function include_mount_options_functions {
	:
}

# $1: mount point
# $2: new mount point option
function ensure_mount_option_in_fstab {
	local _mount_point="$1" _new_opt="$2" _mount_point_match_regexp="" _previous_mount_opts=""
	_mount_point_match_regexp="$(get_mount_point_regexp "$_mount_point")"

	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -c "$_new_opt" ) -eq 0 ]; then
		_previous_mount_opts=$(grep "$_mount_point_match_regexp" /etc/fstab | awk '{print $4}')
		sed -i "s|\(${_mount_point_match_regexp}.*${_previous_mount_opts}\)|\1,${_new_opt}|" /etc/fstab
	fi
}

# $1: mount point
function get_mount_point_regexp {
		printf "[[:space:]]%s[[:space:]]" "$1"
}

# $1: mount point
function assert_mount_point_in_fstab {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	grep "$_mount_point_match_regexp" -q /etc/fstab \
		|| { echo "The mount point '$1' is not even in /etc/fstab, so we can't set up mount options" >&2; return 1; }
}

# $1: mount point
function remove_defaults_from_fstab_if_overriden {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -q "defaults,") -gt 0 ]
	then
		sed -i "s|\(${_mount_point_match_regexp}.*\)defaults,|\1|" /etc/fstab
	fi
}

# $1: mount point
function ensure_partition_is_mounted {
	local _mount_point="$1"
	mkdir -p "$_mount_point" || return 1
	if mountpoint -q "$_mount_point"; then
		mount -o remount --target "$_mount_point"
	else
		mount --target "$_mount_point"
	fi
}

include_mount_options_functions

# test "$mount_has_to_exist" = 'yes'
test "yes" = 'yes' && assert_mount_point_in_fstab /var/tmp \
	|| { echo "Not remediating, because there is no record of /var/tmp in /etc/fstab" >&2; exit 1; }

ensure_mount_option_in_fstab "/var/tmp" "bind"

ensure_partition_is_mounted "/var/tmp"

- name: get back device associated to mountpoint
  shell: mount | grep ' /var/tmp ' |cut -d ' ' -f 1
  register: device_name
  check_mode: no
  tags:
    - mount_option_var_tmp_bind
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26582-7
    - NIST-800-53-CM-7

- name: get back device previous mount option
  shell: mount | grep ' /var/tmp ' | sed -re 's:.*\((.*)\):\1:'
  register: device_cur_mountoption
  check_mode: no
  tags:
    - mount_option_var_tmp_bind
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26582-7
    - NIST-800-53-CM-7

- name: get back device fstype
  shell: mount | grep ' /var/tmp ' | cut -d ' ' -f 5
  register: device_fstype
  check_mode: no
  tags:
    - mount_option_var_tmp_bind
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26582-7
    - NIST-800-53-CM-7

- name: Ensure permission bind are set on /var/tmp
  mount:
    path: "/var/tmp"
    src: "{{device_name.stdout}}"
    opts: "{{device_cur_mountoption.stdout}},bind"
    state: "mounted"
    fstype: "{{device_fstype.stdout}}"
  tags:
    - mount_option_var_tmp_bind
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26582-7
    - NIST-800-53-CM-7

function include_mount_options_functions {
	:
}

# $1: mount point
# $2: new mount point option
function ensure_mount_option_in_fstab {
	local _mount_point="$1" _new_opt="$2" _mount_point_match_regexp="" _previous_mount_opts=""
	_mount_point_match_regexp="$(get_mount_point_regexp "$_mount_point")"

	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -c "$_new_opt" ) -eq 0 ]; then
		_previous_mount_opts=$(grep "$_mount_point_match_regexp" /etc/fstab | awk '{print $4}')
		sed -i "s|\(${_mount_point_match_regexp}.*${_previous_mount_opts}\)|\1,${_new_opt}|" /etc/fstab
	fi
}

# $1: mount point
function get_mount_point_regexp {
		printf "[[:space:]]%s[[:space:]]" "$1"
}

# $1: mount point
function assert_mount_point_in_fstab {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	grep "$_mount_point_match_regexp" -q /etc/fstab \
		|| { echo "The mount point '$1' is not even in /etc/fstab, so we can't set up mount options" >&2; return 1; }
}

# $1: mount point
function remove_defaults_from_fstab_if_overriden {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -q "defaults,") -gt 0 ]
	then
		sed -i "s|\(${_mount_point_match_regexp}.*\)defaults,|\1|" /etc/fstab
	fi
}

# $1: mount point
function ensure_partition_is_mounted {
	local _mount_point="$1"
	mkdir -p "$_mount_point" || return 1
	if mountpoint -q "$_mount_point"; then
		mount -o remount --target "$_mount_point"
	else
		mount --target "$_mount_point"
	fi
}

include_mount_options_functions

# test "$mount_has_to_exist" = 'yes'
test "yes" = 'yes' && assert_mount_point_in_fstab /tmp \
	|| { echo "Not remediating, because there is no record of /tmp in /etc/fstab" >&2; exit 1; }

ensure_mount_option_in_fstab "/tmp" "nodev"

ensure_partition_is_mounted "/tmp"

- name: get back device associated to mountpoint
  shell: mount | grep ' /tmp ' |cut -d ' ' -f 1
  register: device_name
  check_mode: no
  tags:
    - mount_option_tmp_nodev
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26499-4
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

- name: get back device previous mount option
  shell: mount | grep ' /tmp ' | sed -re 's:.*\((.*)\):\1:'
  register: device_cur_mountoption
  check_mode: no
  tags:
    - mount_option_tmp_nodev
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26499-4
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

- name: get back device fstype
  shell: mount | grep ' /tmp ' | cut -d ' ' -f 5
  register: device_fstype
  check_mode: no
  tags:
    - mount_option_tmp_nodev
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26499-4
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

- name: Ensure permission nodev are set on /tmp
  mount:
    path: "/tmp"
    src: "{{device_name.stdout}}"
    opts: "{{device_cur_mountoption.stdout}},nodev"
    state: "mounted"
    fstype: "{{device_fstype.stdout}}"
  tags:
    - mount_option_tmp_nodev
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26499-4
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

function include_mount_options_functions {
	:
}

# $1: mount point
# $2: new mount point option
function ensure_mount_option_in_fstab {
	local _mount_point="$1" _new_opt="$2" _mount_point_match_regexp="" _previous_mount_opts=""
	_mount_point_match_regexp="$(get_mount_point_regexp "$_mount_point")"

	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -c "$_new_opt" ) -eq 0 ]; then
		_previous_mount_opts=$(grep "$_mount_point_match_regexp" /etc/fstab | awk '{print $4}')
		sed -i "s|\(${_mount_point_match_regexp}.*${_previous_mount_opts}\)|\1,${_new_opt}|" /etc/fstab
	fi
}

# $1: mount point
function get_mount_point_regexp {
		printf "[[:space:]]%s[[:space:]]" "$1"
}

# $1: mount point
function assert_mount_point_in_fstab {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	grep "$_mount_point_match_regexp" -q /etc/fstab \
		|| { echo "The mount point '$1' is not even in /etc/fstab, so we can't set up mount options" >&2; return 1; }
}

# $1: mount point
function remove_defaults_from_fstab_if_overriden {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -q "defaults,") -gt 0 ]
	then
		sed -i "s|\(${_mount_point_match_regexp}.*\)defaults,|\1|" /etc/fstab
	fi
}

# $1: mount point
function ensure_partition_is_mounted {
	local _mount_point="$1"
	mkdir -p "$_mount_point" || return 1
	if mountpoint -q "$_mount_point"; then
		mount -o remount --target "$_mount_point"
	else
		mount --target "$_mount_point"
	fi
}

include_mount_options_functions

# test "$mount_has_to_exist" = 'yes'
test "yes" = 'yes' && assert_mount_point_in_fstab /tmp \
	|| { echo "Not remediating, because there is no record of /tmp in /etc/fstab" >&2; exit 1; }

ensure_mount_option_in_fstab "/tmp" "noexec"

ensure_partition_is_mounted "/tmp"

- name: get back device associated to mountpoint
  shell: mount | grep ' /tmp ' |cut -d ' ' -f 1
  register: device_name
  check_mode: no
  tags:
    - mount_option_tmp_noexec
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26720-3
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2
    - DISA-STIG-RHEL-06-000528

- name: get back device previous mount option
  shell: mount | grep ' /tmp ' | sed -re 's:.*\((.*)\):\1:'
  register: device_cur_mountoption
  check_mode: no
  tags:
    - mount_option_tmp_noexec
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26720-3
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2
    - DISA-STIG-RHEL-06-000528

- name: get back device fstype
  shell: mount | grep ' /tmp ' | cut -d ' ' -f 5
  register: device_fstype
  check_mode: no
  tags:
    - mount_option_tmp_noexec
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26720-3
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2
    - DISA-STIG-RHEL-06-000528

- name: Ensure permission noexec are set on /tmp
  mount:
    path: "/tmp"
    src: "{{device_name.stdout}}"
    opts: "{{device_cur_mountoption.stdout}},noexec"
    state: "mounted"
    fstype: "{{device_fstype.stdout}}"
  tags:
    - mount_option_tmp_noexec
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26720-3
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2
    - DISA-STIG-RHEL-06-000528

function include_mount_options_functions {
	:
}

# $1: mount point
# $2: new mount point option
function ensure_mount_option_in_fstab {
	local _mount_point="$1" _new_opt="$2" _mount_point_match_regexp="" _previous_mount_opts=""
	_mount_point_match_regexp="$(get_mount_point_regexp "$_mount_point")"

	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -c "$_new_opt" ) -eq 0 ]; then
		_previous_mount_opts=$(grep "$_mount_point_match_regexp" /etc/fstab | awk '{print $4}')
		sed -i "s|\(${_mount_point_match_regexp}.*${_previous_mount_opts}\)|\1,${_new_opt}|" /etc/fstab
	fi
}

# $1: mount point
function get_mount_point_regexp {
		printf "[[:space:]]%s[[:space:]]" "$1"
}

# $1: mount point
function assert_mount_point_in_fstab {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	grep "$_mount_point_match_regexp" -q /etc/fstab \
		|| { echo "The mount point '$1' is not even in /etc/fstab, so we can't set up mount options" >&2; return 1; }
}

# $1: mount point
function remove_defaults_from_fstab_if_overriden {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -q "defaults,") -gt 0 ]
	then
		sed -i "s|\(${_mount_point_match_regexp}.*\)defaults,|\1|" /etc/fstab
	fi
}

# $1: mount point
function ensure_partition_is_mounted {
	local _mount_point="$1"
	mkdir -p "$_mount_point" || return 1
	if mountpoint -q "$_mount_point"; then
		mount -o remount --target "$_mount_point"
	else
		mount --target "$_mount_point"
	fi
}

include_mount_options_functions

# test "$mount_has_to_exist" = 'yes'
test "yes" = 'yes' && assert_mount_point_in_fstab /tmp \
	|| { echo "Not remediating, because there is no record of /tmp in /etc/fstab" >&2; exit 1; }

ensure_mount_option_in_fstab "/tmp" "nosuid"

ensure_partition_is_mounted "/tmp"

- name: get back device associated to mountpoint
  shell: mount | grep ' /tmp ' |cut -d ' ' -f 1
  register: device_name
  check_mode: no
  tags:
    - mount_option_tmp_nosuid
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26762-5
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

- name: get back device previous mount option
  shell: mount | grep ' /tmp ' | sed -re 's:.*\((.*)\):\1:'
  register: device_cur_mountoption
  check_mode: no
  tags:
    - mount_option_tmp_nosuid
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26762-5
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

- name: get back device fstype
  shell: mount | grep ' /tmp ' | cut -d ' ' -f 5
  register: device_fstype
  check_mode: no
  tags:
    - mount_option_tmp_nosuid
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26762-5
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

- name: Ensure permission nosuid are set on /tmp
  mount:
    path: "/tmp"
    src: "{{device_name.stdout}}"
    opts: "{{device_cur_mountoption.stdout}},nosuid"
    state: "mounted"
    fstype: "{{device_fstype.stdout}}"
  tags:
    - mount_option_tmp_nosuid
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26762-5
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

var_removable_partition="(N/A)"
function include_mount_options_functions {
	:
}

# $1: mount point
# $2: new mount point option
function ensure_mount_option_in_fstab {
	local _mount_point="$1" _new_opt="$2" _mount_point_match_regexp="" _previous_mount_opts=""
	_mount_point_match_regexp="$(get_mount_point_regexp "$_mount_point")"

	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -c "$_new_opt" ) -eq 0 ]; then
		_previous_mount_opts=$(grep "$_mount_point_match_regexp" /etc/fstab | awk '{print $4}')
		sed -i "s|\(${_mount_point_match_regexp}.*${_previous_mount_opts}\)|\1,${_new_opt}|" /etc/fstab
	fi
}

# $1: mount point
function get_mount_point_regexp {
		printf "[[:space:]]%s[[:space:]]" "$1"
}

# $1: mount point
function assert_mount_point_in_fstab {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	grep "$_mount_point_match_regexp" -q /etc/fstab \
		|| { echo "The mount point '$1' is not even in /etc/fstab, so we can't set up mount options" >&2; return 1; }
}

# $1: mount point
function remove_defaults_from_fstab_if_overriden {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -q "defaults,") -gt 0 ]
	then
		sed -i "s|\(${_mount_point_match_regexp}.*\)defaults,|\1|" /etc/fstab
	fi
}

# $1: mount point
function ensure_partition_is_mounted {
	local _mount_point="$1"
	mkdir -p "$_mount_point" || return 1
	if mountpoint -q "$_mount_point"; then
		mount -o remount --target "$_mount_point"
	else
		mount --target "$_mount_point"
	fi
}

include_mount_options_functions

# test "$mount_has_to_exist" = 'yes'
test "no" = 'yes' && assert_mount_point_in_fstab "$var_removable_partition" \
	|| { echo "Not remediating, because there is no record of $var_removable_partition in /etc/fstab" >&2; exit 1; }

ensure_mount_option_in_fstab "$var_removable_partition" "nosuid"

ensure_partition_is_mounted "$var_removable_partition"

- name: XCCDF Value var_removable_partition # promote to variable
  set_fact:
    var_removable_partition: (N/A)
  tags:
    - always

- name: get back device associated to mountpoint
  shell: mount | grep ' {{ var_removable_partition }} ' |cut -d ' ' -f 1
  register: device_name
  check_mode: no
  tags:
    - mount_option_nosuid_removable_partitions
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-27056-1
    - NIST-800-53-AC-19(a)
    - NIST-800-53-AC-19(d)
    - NIST-800-53-AC-19(e)
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

- name: get back device previous mount option
  shell: mount | grep ' {{ var_removable_partition }} ' | sed -re 's:.*\((.*)\):\1:'
  register: device_cur_mountoption
  check_mode: no
  tags:
    - mount_option_nosuid_removable_partitions
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-27056-1
    - NIST-800-53-AC-19(a)
    - NIST-800-53-AC-19(d)
    - NIST-800-53-AC-19(e)
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

- name: get back device fstype
  shell: mount | grep ' {{ var_removable_partition }} ' | cut -d ' ' -f 5
  register: device_fstype
  check_mode: no
  tags:
    - mount_option_nosuid_removable_partitions
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-27056-1
    - NIST-800-53-AC-19(a)
    - NIST-800-53-AC-19(d)
    - NIST-800-53-AC-19(e)
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

- name: Ensure permission nosuid are set on var_removable_partition
  mount:
    path: "{{ var_removable_partition }}"
    src: "{{device_name.stdout}}"
    opts: "{{ device_cur_mountoption.stdout }},nosuid"
    state: "mounted"
    fstype: "{{device_fstype.stdout}}"
  tags:
    - mount_option_nosuid_removable_partitions
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-27056-1
    - NIST-800-53-AC-19(a)
    - NIST-800-53-AC-19(d)
    - NIST-800-53-AC-19(e)
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

# NOTE: Run-time reconfiguration of partitions' mount options is not possible.
# After performing this remediation be sure to also subsequently reboot the
# system as soon as possible for the remediation to take the effect!

# Shortened ID for frequently used character class
SP="[:space:]"

# Load /etc/fstab's content with LABEL= and UUID= tags expanded to real
# device names into FSTAB_REAL_DEVICES array splitting items by newline
IFS=$'\n' FSTAB_REAL_DEVICES=($(findmnt --fstab --evaluate --noheadings))

for line in ${FSTAB_REAL_DEVICES[@]}
do
    # For each line:
    # * squeeze multiple space characters into one,
    # * split line content info four columns (target, source, fstype, and
    #   mount options) by space delimiter
    IFS=$' ' read TARGET SOURCE FSTYPE MOUNT_OPTIONS <<< "$(echo $line | tr -s ' ')"

    # Filter the targets according to the following criteria:
    # * don't include record for root partition,
    # * include the target only if it has the form of '/word.*' (not to include
    #   special entries like e.g swap),
    # * include the target only if its source has the form of '/dev.*'
    #   (to process only local partitions)
    if [[ ! $TARGET =~ ^\/$ ]] 		&&	# Don't include root partition
       [[ $TARGET =~ ^\/[A-Za-z0-9_] ]] &&	# Include if target =~ '/word.*'
       [[ $SOURCE =~ ^\/dev ]]			# Include if source =~ '/dev.*'
    then

        # Check the mount options column if it doesn't contain 'nodev' keyword yet
        if ! grep -q "nodev" <<< "$MOUNT_OPTIONS"
        then
            # Check if current mount options is empty string ('') meaning
            # particular /etc/fstab row contain just 'defaults' keyword
            if [[ ${#MOUNT_OPTIONS} == "0" ]]
            then
                # If so, add 'defaults' back and append 'nodev' keyword
                MOUNT_OPTIONS="defaults,nodev"
            else
                # Otherwise append just 'nodev' keyword
                MOUNT_OPTIONS="$MOUNT_OPTIONS,nodev"
            fi

            # Escape possible slash ('/') characters in target for use as sed
            # expression below
            TARGET_ESCAPED=${TARGET//$'/'/$'\/'}
            # This target doesn't contain 'nodev' in mount options yet (and meets
            # the above filtering criteria). Therefore obtain particular /etc/fstab's
            # row into FSTAB_TARGET_ROW variable separating the mount options field with
            # hash '#' character
            FSTAB_TARGET_ROW=$(sed -n "s/\(.*$TARGET_ESCAPED[$SP]\+$FSTYPE[$SP]\+\)\([^$SP]\+\)/\1#\2#/p" /etc/fstab)
            # Split the retrieved value by the hash '#' delimiter to get the
            # row's head & tail (i.e. columns other than mount options) which won't
            # get modified
            IFS=$'#' read TARGET_HEAD TARGET_OPTS TARGET_TAIL <<< "$FSTAB_TARGET_ROW"
            # Replace old mount options for particular /etc/fstab's row (for this target
            # and fstype) with new mount options
            sed -i "s#${TARGET_HEAD}\(.*\)${TARGET_TAIL}#${TARGET_HEAD}${MOUNT_OPTIONS}${TARGET_TAIL}#" /etc/fstab

        fi
    fi
done

var_removable_partition="(N/A)"
function include_mount_options_functions {
	:
}

# $1: mount point
# $2: new mount point option
function ensure_mount_option_in_fstab {
	local _mount_point="$1" _new_opt="$2" _mount_point_match_regexp="" _previous_mount_opts=""
	_mount_point_match_regexp="$(get_mount_point_regexp "$_mount_point")"

	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -c "$_new_opt" ) -eq 0 ]; then
		_previous_mount_opts=$(grep "$_mount_point_match_regexp" /etc/fstab | awk '{print $4}')
		sed -i "s|\(${_mount_point_match_regexp}.*${_previous_mount_opts}\)|\1,${_new_opt}|" /etc/fstab
	fi
}

# $1: mount point
function get_mount_point_regexp {
		printf "[[:space:]]%s[[:space:]]" "$1"
}

# $1: mount point
function assert_mount_point_in_fstab {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	grep "$_mount_point_match_regexp" -q /etc/fstab \
		|| { echo "The mount point '$1' is not even in /etc/fstab, so we can't set up mount options" >&2; return 1; }
}

# $1: mount point
function remove_defaults_from_fstab_if_overriden {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -q "defaults,") -gt 0 ]
	then
		sed -i "s|\(${_mount_point_match_regexp}.*\)defaults,|\1|" /etc/fstab
	fi
}

# $1: mount point
function ensure_partition_is_mounted {
	local _mount_point="$1"
	mkdir -p "$_mount_point" || return 1
	if mountpoint -q "$_mount_point"; then
		mount -o remount --target "$_mount_point"
	else
		mount --target "$_mount_point"
	fi
}

include_mount_options_functions

# test "$mount_has_to_exist" = 'yes'
test "no" = 'yes' && assert_mount_point_in_fstab "$var_removable_partition" \
	|| { echo "Not remediating, because there is no record of $var_removable_partition in /etc/fstab" >&2; exit 1; }

ensure_mount_option_in_fstab "$var_removable_partition" "nodev"

ensure_partition_is_mounted "$var_removable_partition"

- name: XCCDF Value var_removable_partition # promote to variable
  set_fact:
    var_removable_partition: (N/A)
  tags:
    - always

- name: get back device associated to mountpoint
  shell: mount | grep ' {{ var_removable_partition }} ' |cut -d ' ' -f 1
  register: device_name
  check_mode: no
  tags:
    - mount_option_nodev_removable_partitions
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26860-7
    - NIST-800-53-AC-19(a)
    - NIST-800-53-AC-19(d)
    - NIST-800-53-AC-19(e)
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

- name: get back device previous mount option
  shell: mount | grep ' {{ var_removable_partition }} ' | sed -re 's:.*\((.*)\):\1:'
  register: device_cur_mountoption
  check_mode: no
  tags:
    - mount_option_nodev_removable_partitions
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26860-7
    - NIST-800-53-AC-19(a)
    - NIST-800-53-AC-19(d)
    - NIST-800-53-AC-19(e)
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

- name: get back device fstype
  shell: mount | grep ' {{ var_removable_partition }} ' | cut -d ' ' -f 5
  register: device_fstype
  check_mode: no
  tags:
    - mount_option_nodev_removable_partitions
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26860-7
    - NIST-800-53-AC-19(a)
    - NIST-800-53-AC-19(d)
    - NIST-800-53-AC-19(e)
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

- name: Ensure permission nodev are set on var_removable_partition
  mount:
    path: "{{ var_removable_partition }}"
    src: "{{device_name.stdout}}"
    opts: "{{ device_cur_mountoption.stdout }},nodev"
    state: "mounted"
    fstype: "{{device_fstype.stdout}}"
  tags:
    - mount_option_nodev_removable_partitions
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26860-7
    - NIST-800-53-AC-19(a)
    - NIST-800-53-AC-19(d)
    - NIST-800-53-AC-19(e)
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

var_removable_partition="(N/A)"
function include_mount_options_functions {
	:
}

# $1: mount point
# $2: new mount point option
function ensure_mount_option_in_fstab {
	local _mount_point="$1" _new_opt="$2" _mount_point_match_regexp="" _previous_mount_opts=""
	_mount_point_match_regexp="$(get_mount_point_regexp "$_mount_point")"

	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -c "$_new_opt" ) -eq 0 ]; then
		_previous_mount_opts=$(grep "$_mount_point_match_regexp" /etc/fstab | awk '{print $4}')
		sed -i "s|\(${_mount_point_match_regexp}.*${_previous_mount_opts}\)|\1,${_new_opt}|" /etc/fstab
	fi
}

# $1: mount point
function get_mount_point_regexp {
		printf "[[:space:]]%s[[:space:]]" "$1"
}

# $1: mount point
function assert_mount_point_in_fstab {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	grep "$_mount_point_match_regexp" -q /etc/fstab \
		|| { echo "The mount point '$1' is not even in /etc/fstab, so we can't set up mount options" >&2; return 1; }
}

# $1: mount point
function remove_defaults_from_fstab_if_overriden {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -q "defaults,") -gt 0 ]
	then
		sed -i "s|\(${_mount_point_match_regexp}.*\)defaults,|\1|" /etc/fstab
	fi
}

# $1: mount point
function ensure_partition_is_mounted {
	local _mount_point="$1"
	mkdir -p "$_mount_point" || return 1
	if mountpoint -q "$_mount_point"; then
		mount -o remount --target "$_mount_point"
	else
		mount --target "$_mount_point"
	fi
}

include_mount_options_functions

# test "$mount_has_to_exist" = 'yes'
test "no" = 'yes' && assert_mount_point_in_fstab "$var_removable_partition" \
	|| { echo "Not remediating, because there is no record of $var_removable_partition in /etc/fstab" >&2; exit 1; }

ensure_mount_option_in_fstab "$var_removable_partition" "noexec"

ensure_partition_is_mounted "$var_removable_partition"

- name: XCCDF Value var_removable_partition # promote to variable
  set_fact:
    var_removable_partition: (N/A)
  tags:
    - always

- name: get back device associated to mountpoint
  shell: mount | grep ' {{ var_removable_partition }} ' |cut -d ' ' -f 1
  register: device_name
  check_mode: no
  tags:
    - mount_option_noexec_removable_partitions
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-27196-5
    - NIST-800-53-AC-19(a)
    - NIST-800-53-AC-19(d)
    - NIST-800-53-AC-19(e)
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2
    - DISA-STIG-RHEL-06-000271

- name: get back device previous mount option
  shell: mount | grep ' {{ var_removable_partition }} ' | sed -re 's:.*\((.*)\):\1:'
  register: device_cur_mountoption
  check_mode: no
  tags:
    - mount_option_noexec_removable_partitions
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-27196-5
    - NIST-800-53-AC-19(a)
    - NIST-800-53-AC-19(d)
    - NIST-800-53-AC-19(e)
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2
    - DISA-STIG-RHEL-06-000271

- name: get back device fstype
  shell: mount | grep ' {{ var_removable_partition }} ' | cut -d ' ' -f 5
  register: device_fstype
  check_mode: no
  tags:
    - mount_option_noexec_removable_partitions
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-27196-5
    - NIST-800-53-AC-19(a)
    - NIST-800-53-AC-19(d)
    - NIST-800-53-AC-19(e)
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2
    - DISA-STIG-RHEL-06-000271

- name: Ensure permission noexec are set on var_removable_partition
  mount:
    path: "{{ var_removable_partition }}"
    src: "{{device_name.stdout}}"
    opts: "{{ device_cur_mountoption.stdout }},noexec"
    state: "mounted"
    fstype: "{{device_fstype.stdout}}"
  tags:
    - mount_option_noexec_removable_partitions
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-27196-5
    - NIST-800-53-AC-19(a)
    - NIST-800-53-AC-19(d)
    - NIST-800-53-AC-19(e)
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2
    - DISA-STIG-RHEL-06-000271

function include_mount_options_functions {
	:
}

# $1: mount point
# $2: new mount point option
function ensure_mount_option_in_fstab {
	local _mount_point="$1" _new_opt="$2" _mount_point_match_regexp="" _previous_mount_opts=""
	_mount_point_match_regexp="$(get_mount_point_regexp "$_mount_point")"

	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -c "$_new_opt" ) -eq 0 ]; then
		_previous_mount_opts=$(grep "$_mount_point_match_regexp" /etc/fstab | awk '{print $4}')
		sed -i "s|\(${_mount_point_match_regexp}.*${_previous_mount_opts}\)|\1,${_new_opt}|" /etc/fstab
	fi
}

# $1: mount point
function get_mount_point_regexp {
		printf "[[:space:]]%s[[:space:]]" "$1"
}

# $1: mount point
function assert_mount_point_in_fstab {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	grep "$_mount_point_match_regexp" -q /etc/fstab \
		|| { echo "The mount point '$1' is not even in /etc/fstab, so we can't set up mount options" >&2; return 1; }
}

# $1: mount point
function remove_defaults_from_fstab_if_overriden {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -q "defaults,") -gt 0 ]
	then
		sed -i "s|\(${_mount_point_match_regexp}.*\)defaults,|\1|" /etc/fstab
	fi
}

# $1: mount point
function ensure_partition_is_mounted {
	local _mount_point="$1"
	mkdir -p "$_mount_point" || return 1
	if mountpoint -q "$_mount_point"; then
		mount -o remount --target "$_mount_point"
	else
		mount --target "$_mount_point"
	fi
}

include_mount_options_functions

# test "$mount_has_to_exist" = 'yes'
test "yes" = 'yes' && assert_mount_point_in_fstab /dev/shm \
	|| { echo "Not remediating, because there is no record of /dev/shm in /etc/fstab" >&2; exit 1; }

ensure_mount_option_in_fstab "/dev/shm" "nosuid"

ensure_partition_is_mounted "/dev/shm"

- name: get back device associated to mountpoint
  shell: mount | grep ' /dev/shm ' |cut -d ' ' -f 1
  register: device_name
  check_mode: no
  tags:
    - mount_option_dev_shm_nosuid
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26486-1
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

- name: get back device previous mount option
  shell: mount | grep ' /dev/shm ' | sed -re 's:.*\((.*)\):\1:'
  register: device_cur_mountoption
  check_mode: no
  tags:
    - mount_option_dev_shm_nosuid
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26486-1
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

- name: get back device fstype
  shell: mount | grep ' /dev/shm ' | cut -d ' ' -f 5
  register: device_fstype
  check_mode: no
  tags:
    - mount_option_dev_shm_nosuid
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26486-1
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

- name: Ensure permission nosuid are set on /dev/shm
  mount:
    path: "/dev/shm"
    src: "{{device_name.stdout}}"
    opts: "{{device_cur_mountoption.stdout}},nosuid"
    state: "mounted"
    fstype: "{{device_fstype.stdout}}"
  tags:
    - mount_option_dev_shm_nosuid
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26486-1
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

function include_mount_options_functions {
	:
}

# $1: mount point
# $2: new mount point option
function ensure_mount_option_in_fstab {
	local _mount_point="$1" _new_opt="$2" _mount_point_match_regexp="" _previous_mount_opts=""
	_mount_point_match_regexp="$(get_mount_point_regexp "$_mount_point")"

	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -c "$_new_opt" ) -eq 0 ]; then
		_previous_mount_opts=$(grep "$_mount_point_match_regexp" /etc/fstab | awk '{print $4}')
		sed -i "s|\(${_mount_point_match_regexp}.*${_previous_mount_opts}\)|\1,${_new_opt}|" /etc/fstab
	fi
}

# $1: mount point
function get_mount_point_regexp {
		printf "[[:space:]]%s[[:space:]]" "$1"
}

# $1: mount point
function assert_mount_point_in_fstab {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	grep "$_mount_point_match_regexp" -q /etc/fstab \
		|| { echo "The mount point '$1' is not even in /etc/fstab, so we can't set up mount options" >&2; return 1; }
}

# $1: mount point
function remove_defaults_from_fstab_if_overriden {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -q "defaults,") -gt 0 ]
	then
		sed -i "s|\(${_mount_point_match_regexp}.*\)defaults,|\1|" /etc/fstab
	fi
}

# $1: mount point
function ensure_partition_is_mounted {
	local _mount_point="$1"
	mkdir -p "$_mount_point" || return 1
	if mountpoint -q "$_mount_point"; then
		mount -o remount --target "$_mount_point"
	else
		mount --target "$_mount_point"
	fi
}

include_mount_options_functions

# test "$mount_has_to_exist" = 'yes'
test "yes" = 'yes' && assert_mount_point_in_fstab /dev/shm \
	|| { echo "Not remediating, because there is no record of /dev/shm in /etc/fstab" >&2; exit 1; }

ensure_mount_option_in_fstab "/dev/shm" "nodev"

ensure_partition_is_mounted "/dev/shm"

- name: get back device associated to mountpoint
  shell: mount | grep ' /dev/shm ' |cut -d ' ' -f 1
  register: device_name
  check_mode: no
  tags:
    - mount_option_dev_shm_nodev
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26778-1
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

- name: get back device previous mount option
  shell: mount | grep ' /dev/shm ' | sed -re 's:.*\((.*)\):\1:'
  register: device_cur_mountoption
  check_mode: no
  tags:
    - mount_option_dev_shm_nodev
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26778-1
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

- name: get back device fstype
  shell: mount | grep ' /dev/shm ' | cut -d ' ' -f 5
  register: device_fstype
  check_mode: no
  tags:
    - mount_option_dev_shm_nodev
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26778-1
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

- name: Ensure permission nodev are set on /dev/shm
  mount:
    path: "/dev/shm"
    src: "{{device_name.stdout}}"
    opts: "{{device_cur_mountoption.stdout}},nodev"
    state: "mounted"
    fstype: "{{device_fstype.stdout}}"
  tags:
    - mount_option_dev_shm_nodev
    - unknown_severity
    - configure_strategy
    - low_complexity
    - high_disruption
    - CCE-26778-1
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2

umask 027

var_umask_for_daemons="027"

grep -q ^umask /etc/init.d/functions && \
  sed -i "s/umask.*/umask $var_umask_for_daemons/g" /etc/init.d/functions
if ! [ $? -eq 0 ]; then
    echo "umask $var_umask_for_daemons" >> /etc/init.d/functions
fi

$ sudo sysctl -w fs.suid_dumpable=0
fs.suid_dumpable = 0

#
# Set runtime for fs.suid_dumpable
#
/sbin/sysctl -q -n -w fs.suid_dumpable=0

#
# If fs.suid_dumpable present in /etc/sysctl.conf, change value to "0"
#	else, add "fs.suid_dumpable = 0" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^fs.suid_dumpable' "0" 'CCE-27044-7'

- name: Ensure sysctl fs.suid_dumpable is set to 0
  sysctl:
    name: fs.suid_dumpable
    value: 0
    state: present
    reload: yes
  tags:
    - sysctl_fs_suid_dumpable
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-27044-7
    - NIST-800-53-SI-11

*     hard   core    0
echo "*     hard   core    0" >> /etc/security/limits.conf

$ sudo sysctl -w kernel.exec-shield=1
kernel.exec-shield = 1

#
# Set runtime for kernel.exec-shield
#
/sbin/sysctl -q -n -w kernel.exec-shield=1

#
# If kernel.exec-shield present in /etc/sysctl.conf, change value to "1"
#	else, add "kernel.exec-shield = 1" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^kernel.exec-shield' "1" 'CCE-27007-4'

- name: Ensure sysctl kernel.exec-shield is set to 1
  sysctl:
    name: kernel.exec-shield
    value: 1
    state: present
    reload: yes
  tags:
    - sysctl_kernel_exec_shield
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-27007-4
    - NIST-800-53-SC-39
    - DISA-STIG-RHEL-06-000079

$ sudo sysctl -w kernel.randomize_va_space=2
kernel.randomize_va_space = 2

#
# Set runtime for kernel.randomize_va_space
#
/sbin/sysctl -q -n -w kernel.randomize_va_space=2

#
# If kernel.randomize_va_space present in /etc/sysctl.conf, change value to "2"
#	else, add "kernel.randomize_va_space = 2" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if grep -q $grep_case_insensitive_option "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' "2" 'CCE-26999-3'

- name: Ensure sysctl kernel.randomize_va_space is set to 2
  sysctl:
    name: kernel.randomize_va_space
    value: 2
    state: present
    reload: yes
  tags:
    - sysctl_kernel_randomize_va_space
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - CCE-26999-3
    - NIST-800-53-SC-30(2)
    - DISA-STIG-RHEL-06-000078

Profile Title	C2S for Red Hat Enterprise Linux 6
Profile ID	xccdf_org.ssgproject.content_profile_C2S

Guide to the Secure Configuration of Red Hat Enterprise Linux 6

Revision History

Platforms

Table of Contents

Checklist

Services [ref]group

FTP Server [ref]group

Disable vsftpd if Possible [ref]group

Uninstall vsftpd Package [ref]rule

Web Server [ref]group

Disable Apache if Possible [ref]group

Uninstall httpd Package [ref]rule

DNS Server [ref]group

Disable DNS Server [ref]group

Uninstall bind Package [ref]rule

Network Time Protocol [ref]group

Enable the NTP Daemon [ref]rule

Specify Additional Remote NTP Servers [ref]rule

Specify a Remote NTP Server [ref]rule

LDAP [ref]group

Configure OpenLDAP Server [ref]group

Uninstall openldap-servers Package [ref]rule

SNMP Server [ref]group

Disable SNMP Server if Possible [ref]group

Uninstall net-snmp Package [ref]rule

Obsolete Services [ref]group

Rlogin, Rsh, and Rexec [ref]group

Uninstal rsh Package [ref]rule

Uninstall rsh-server Package [ref]rule

Remove Rsh Trust Files [ref]rule

Telnet [ref]group

Remove telnet Clients [ref]rule

Uninstall telnet-server Package [ref]rule

NIS [ref]group

Remove NIS Client [ref]rule

Uninstall ypserv Package [ref]rule

TFTP Server [ref]group

Remove tftp [ref]rule

Uninstall tftp-server Package [ref]rule

Xinetd [ref]group

Uninstall xinetd Package [ref]rule

Chat/Messaging Services [ref]group

Uninstall talk Package [ref]rule

Uninstall talk-server Package [ref]rule

IMAP and POP3 Server [ref]group

Disable Dovecot [ref]group

Uninstall dovecot Package [ref]rule

Cron and At Daemons [ref]group

Enable cron Service [ref]rule

Disable At Service (atd) [ref]rule

NFS and RPC [ref]group

Disable All NFS Services if Possible [ref]group

Disable Services Used Only by NFS [ref]group

Disable Network File System Lock Service (nfslock) [ref]rule

Disable RPC Bind service (rpcbind) [ref]rule

Disable RPC ID Mapping Service (rpcidmapd) [ref]rule

Disable Secure RPC Client Service (rpcgssd) [ref]rule

Configure NFS Clients [ref]group

Disable NFS Server Daemons [ref]group

Disable Secure RPC Server Service (rpcsvcgssd) [ref]rule

Print Support [ref]group

Disable the CUPS Service [ref]rule

Proxy Server [ref]group

Disable Squid if Possible [ref]group

Uninstall squid Package [ref]rule

Base Services [ref]group

Disable Red Hat Network Service (rhnsd) [ref]rule

Mail Server Software [ref]group

Configure SMTP For Mail Clients [ref]group

Disable Postfix Network Listening [ref]rule

DHCP [ref]group

Disable DHCP Server [ref]group

Uninstall DHCP Server Package [ref]rule

Avahi Server [ref]group

Disable Avahi Server if Possible [ref]group

Disable Avahi Server Software [ref]rule

X Window System [ref]group

Disable X Windows [ref]group

Remove the X Windows Package Group [ref]rule

Samba(SMB) Microsoft Windows File Sharing Server [ref]group